序
本文主要研究一下Jasypt的StandardPBEByteEncryptor
Jasypt
Jasypt即Java Simplified Encryption，它主要是简化项目加解密的工作，内置提供了很多组件的集成，比如hibernate、spring、spring-security等
示例
示例1
代码语言：javascript复制StrongPasswordEncryptor passwordEncryptor = new StrongPasswordEncryptor();
String encryptedPassword = passwordEncryptor.encryptPassword(userPassword);
...
if (passwordEncryptor.checkPassword(inputPassword, encryptedPassword)) {
// correct!
} else {
// bad login!
}示例2
代码语言：javascript复制AES256TextEncryptor textEncryptor = new AES256TextEncryptor();
textEncryptor.setPassword(myEncryptionPassword);
String myEncryptedText = textEncryptor.encrypt(myText);
...
String plainText = textEncryptor.decrypt(myEncryptedText);StandardPBEByteEncryptor
org/jasypt/encryption/pbe/StandardPBEByteEncryptor.java
代码语言：javascript复制public final class StandardPBEByteEncryptor implements PBEByteCleanablePasswordEncryptor {
/**
* The default algorithm to be used if none specified: PBEWithMD5AndDES.
*/
public static final String DEFAULT_ALGORITHM = "PBEWithMD5AndDES";
/**
* The default number of hashing iterations applied for obtaining the encryption key from the specified password,
* set to 1000.
*/
public static final int DEFAULT_KEY_OBTENTION_ITERATIONS = 1000;
/**
* The default salt size, only used if the chosen encryption algorithm is not a block algorithm and thus block size
* cannot be used as salt size.
*/
public static final int DEFAULT_SALT_SIZE_BYTES = 8;
/**
* The default IV size
*/
public static final int IV_SIZE_IN_BITS = 128;
// Algorithm (and provider-related info) for Password Based Encoding.
private String algorithm = DEFAULT_ALGORITHM;
private String providerName = null;
private Provider provider = null;
// Password to be applied. This will NOT have a default value. If none
// is set during configuration, an exception will be thrown.
private char[] password = null;
// Number of hashing iterations to be applied for obtaining the encryption
// key from the specified password.
private int keyObtentionIterations = DEFAULT_KEY_OBTENTION_ITERATIONS;
// SaltGenerator to be used. Initialization of a salt generator is costly,
// and so default value will be applied only in initialize(), if it finally
// becomes necessary.
private SaltGenerator saltGenerator = null;
// IVGenerator to initialise IV
private IVGenerator ivGenerator = null;
// Size in bytes of the IV to be used
private final int IVSizeBytes = IV_SIZE_IN_BITS;
// Size in bytes of the salt to be used for obtaining the
// encryption key. This size will depend on the PBE algorithm being used,
// and it will be set to the size of the block for the specific
// chosen algorithm (if the algorithm is not a block algorithm, the
// default value will be used).
private int saltSizeBytes = DEFAULT_SALT_SIZE_BYTES;
//......
} StandardPBEByteEncryptor实现了PBEByteCleanablePasswordEncryptor接口，而该则集成了PBEByteEncryptor和CleanablePasswordBased接口，PBEByteEncryptor继承了ByteEncryptor、PasswordBased
ByteEncryptor
org/jasypt/encryption/ByteEncryptor.java
代码语言：javascript复制public interface ByteEncryptor {
/**
* Encrypt the input message
*
* @param message the message to be encrypted
* @return the result of encryption
*/
public byte[] encrypt(byte[] message);
/**
* Decrypt an encrypted message
*
* @param encryptedMessage the encrypted message to be decrypted
* @return the result of decryption
*/
public byte[] decrypt(byte[] encryptedMessage);
}ByteEncryptor定义了encrypt和decrypt方法
StandardPBEByteEncryptor.encrypt
代码语言：javascript复制 public byte[] encrypt(final byte[] message) throws EncryptionOperationNotPossibleException {
if (message == null) {
return null;
}
// Check initialization
if (!isInitialized()) {
initialize();
}
try {
final byte[] salt;
byte[] iv = null;
final byte[] encryptedMessage;
if (usingFixedSalt) {
salt = fixedSaltInUse;
synchronized (encryptCipher) {
encryptedMessage = encryptCipher.doFinal(message);
}
}
else {
// Create salt
salt = saltGenerator.generateSalt(saltSizeBytes);
// Create the IV
iv = ivGenerator.generateIV(IVSizeBytes);
IvParameterSpec ivParameterSpec = null;
if (iv != null) {
ivParameterSpec = new IvParameterSpec(iv);
}
/*
* Perform encryption using the Cipher
*/
final PBEParameterSpec parameterSpec = new PBEParameterSpec(salt, keyObtentionIterations,
ivParameterSpec);
synchronized (encryptCipher) {
encryptCipher.init(Cipher.ENCRYPT_MODE, key, parameterSpec);
encryptedMessage = encryptCipher.doFinal(message);
}
}
byte[] encryptedMessageWithIV = encryptedMessage;
if (ivGenerator.includePlainIVInEncryptionResults()) {
encryptedMessageWithIV = CommonUtils.appendArrays(iv, encryptedMessage);
}
// Finally we build an array containing both the unencrypted salt
// and the result of the encryption. This is done only
// if the salt generator we are using specifies to do so.
if (saltGenerator.includePlainSaltInEncryptionResults()) {
// Insert unhashed salt before the encryption result
final byte[] encryptedMessageWithIVAndSalt = CommonUtils.appendArrays(salt, encryptedMessageWithIV);
return encryptedMessageWithIVAndSalt;
}
return encryptedMessageWithIV;
}
catch (final InvalidKeyException e) {
// The problem could be not having the unlimited strength policies
// installed, so better give a usefull error message.
handleInvalidKeyException(e);
throw new EncryptionOperationNotPossibleException();
}
catch (final Exception e) {
// If encryption fails, it is more secure not to return any
// information about the cause in nested exceptions. Simply fail.
throw new EncryptionOperationNotPossibleException();
}
}StandardPBEByteEncryptor的encrypt方法，该方法首先判断salt值是固定的和动态的，固定的则是初始化的时候就设置好的，直接从实例属性取，然后直接调用cipher加密 而动态的话，则通过saltGenerator和generateIV来生成salt和iv，之后根据salt、iv和keyObtentionIterations来创建PBEParameterSpec，然后初始化cipher再进行加密 最后通过ivGenerator判断是否需要把iv包含到加密结果中，是则append到前面进去，再通过saltGenerator判断是否应该把slat包含到加密结果中，是则append到前面进去，最后返回解密结果
StandardPBEByteEncryptor.decrypt
代码语言：javascript复制 public byte[] decrypt(final byte[] encryptedMessage) throws EncryptionOperationNotPossibleException {
if (encryptedMessage == null) {
return null;
}
// Check initialization
if (!isInitialized()) {
initialize();
}
if (saltGenerator.includePlainSaltInEncryptionResults()) {
// Check that the received message is bigger than the salt
if (encryptedMessage.length <= saltSizeBytes) {
throw new EncryptionOperationNotPossibleException();
}
}
// if (this.ivGenerator.includePlainIVInEncryptionResults()) {
// // Check that the received message is bigger than the IV
// if (encryptedMessage.length <= this.IVSizeBytes) {
// throw new EncryptionOperationNotPossibleException();
// }
// }
try {
// If we are using a salt generator which specifies the salt
// to be included into the encrypted message itself, get it from
// there. If not, the salt is supposed to be fixed and thus the
// salt generator can be safely asked for it again.
byte[] salt = null;
byte[] encryptedMessageKernel = null;
if (saltGenerator.includePlainSaltInEncryptionResults()) {
final int saltStart = 0;
final int saltSize = saltSizeBytes < encryptedMessage.length ? saltSizeBytes : encryptedMessage.length;
final int encMesKernelStart = saltSizeBytes < encryptedMessage.length ? saltSizeBytes
: encryptedMessage.length;
final int encMesKernelSize = saltSizeBytes < encryptedMessage.length
? encryptedMessage.length - saltSizeBytes
: 0;
salt = new byte[saltSize];
encryptedMessageKernel = new byte[encMesKernelSize];
System.arraycopy(encryptedMessage, saltStart, salt, 0, saltSize);
System.arraycopy(encryptedMessage, encMesKernelStart, encryptedMessageKernel, 0, encMesKernelSize);
}
else if (!usingFixedSalt) {
salt = saltGenerator.generateSalt(saltSizeBytes);
encryptedMessageKernel = encryptedMessage;
}
else {
// this.usingFixedSalt == true
salt = fixedSaltInUse;
encryptedMessageKernel = encryptedMessage;
}
// Logic for IV
byte[] finalEncryptedMessage;
byte[] iv;
if (ivGenerator.includePlainIVInEncryptionResults()) {
// Extracting the IV
iv = Arrays.copyOfRange(encryptedMessageKernel, 0, IVSizeBytes / 8);
finalEncryptedMessage = Arrays.copyOfRange(encryptedMessageKernel, iv.length,
encryptedMessageKernel.length);
}
else {
// Fixed IV
finalEncryptedMessage = encryptedMessageKernel;
iv = ivGenerator.generateIV(IVSizeBytes);
}
final byte[] decryptedMessage;
if (usingFixedSalt) {
/*
* Fixed salt is being used, therefore no initialization supposedly needed
*/
synchronized (decryptCipher) {
decryptedMessage = decryptCipher.doFinal(encryptedMessageKernel);
}
}
else {
/*
* Perform decryption using the Cipher
*/
IvParameterSpec ivParameterSpec = null;
if (iv != null) {
ivParameterSpec = new IvParameterSpec(iv);
}
final PBEParameterSpec parameterSpec = new PBEParameterSpec(salt, keyObtentionIterations,
ivParameterSpec);
synchronized (decryptCipher) {
decryptCipher.init(Cipher.DECRYPT_MODE, key, parameterSpec);
decryptedMessage = decryptCipher.doFinal(finalEncryptedMessage);
}
}
// Return the results
return decryptedMessage;
}
catch (final InvalidKeyException e) {
// The problem could be not having the unlimited strength policies
// installed, so better give a usefull error message.
handleInvalidKeyException(e);
throw new EncryptionOperationNotPossibleException();
}
catch (final Exception e) {
// If decryption fails, it is more secure not to return any
// information about the cause in nested exceptions. Simply fail.
throw new EncryptionOperationNotPossibleException();
}
}StandardPBEByteEncryptor的decrypt方法先通过saltGenerator判断salt是否包含在密文中，是则根据配置的salt的长度从密文取出来salt，之后通过ivGenerator判断iv是否包含在密文中，是则从剩下的密文取出来iv，得到slat和iv之后，对剩下的密文进行解密
小结
StandardPBEByteEncryptor实现了ByteEncryptor的encrypt和decrypt方法，其主要思路就是判断slat、iv是否包含在密文，然后做对应的处理。
doc
- Jasypt
