序
本文主要研究一下druid的keepalive机制
DruidDataSource
代码语言：javascript复制public class DruidDataSource extends DruidAbstractDataSource implements DruidDataSourceMBean, ManagedDataSource, Referenceable, Closeable, Cloneable, ConnectionPoolDataSource, MBeanRegistration {
private int keepAliveCheckCount = 0;
private DruidConnectionHolder[] keepAliveConnections;
private volatile boolean keepAlive = false;
// from DruidAbstractDataSource
protected volatile long keepAliveBetweenTimeMillis = DEFAULT_TIME_BETWEEN_EVICTION_RUNS_MILLIS * 2;
public static final long DEFAULT_TIME_BETWEEN_EVICTION_RUNS_MILLIS = 60 * 1000L;
public void init() throws SQLException {
//......
if (keepAlive) {
// async fill to minIdle
if (createScheduler != null) {
for (int i = 0; i < minIdle; i) {
submitCreateTask(true);
}
} else {
this.emptySignal();
}
}
//......
}
}
DruidDataSource的init方法在keepAlive的时候触发创建连接，当createScheduler不为null时(
默认为null)执行submitCreateTask，否则执行emptySignal
submitCreateTask
com/alibaba/druid/pool/DruidDataSource.java
代码语言：javascript复制 private void submitCreateTask(boolean initTask) {
createTaskCount ;
CreateConnectionTask task = new CreateConnectionTask(initTask);
if (createTasks == null) {
createTasks = new long[8];
}
boolean putted = false;
for (int i = 0; i < createTasks.length; i) {
if (createTasks[i] == 0) {
createTasks[i] = task.taskId;
putted = true;
break;
}
}
if (!putted) {
long[] array = new long[createTasks.length * 3 / 2];
System.arraycopy(createTasks, 0, array, 0, createTasks.length);
array[createTasks.length] = task.taskId;
createTasks = array;
}
this.createSchedulerFuture = createScheduler.submit(task);
}
submitCreateTask创建CreateConnectionTask，然后提交到createScheduler
CreateConnectionTask
com/alibaba/druid/pool/DruidDataSource.java
代码语言：javascript复制 public class CreateConnectionTask implements Runnable {
private int errorCount;
private boolean initTask;
private final long taskId;
public CreateConnectionTask() {
taskId = createTaskIdSeedUpdater.getAndIncrement(DruidDataSource.this);
}
public CreateConnectionTask(boolean initTask) {
taskId = createTaskIdSeedUpdater.getAndIncrement(DruidDataSource.this);
this.initTask = initTask;
}
@Override
public void run() {
runInternal();
}
private void runInternal() {
for (; ; ) {
// addLast
lock.lock();
try {
if (closed || closing) {
clearCreateTask(taskId);
return;
}
boolean emptyWait = true;
if (createError != null && poolingCount == 0) {
emptyWait = false;
}
if (emptyWait) {
// 必须存在线程等待，才创建连接
if (poolingCount >= notEmptyWaitThreadCount //
&& (!(keepAlive && activeCount poolingCount < minIdle)) // 在keepAlive场景不能放弃创建
&& (!initTask) // 线程池初始化时的任务不能放弃创建
&& !isFailContinuous() // failContinuous时不能放弃创建，否则会无法创建线程
&& !isOnFatalError() // onFatalError时不能放弃创建，否则会无法创建线程
) {
clearCreateTask(taskId);
return;
}
// 防止创建超过maxActive数量的连接
if (activeCount poolingCount >= maxActive) {
clearCreateTask(taskId);
return;
}
}
} finally {
lock.unlock();
}
PhysicalConnectionInfo physicalConnection = null;
try {
physicalConnection = createPhysicalConnection();
} catch (OutOfMemoryError e) {
LOG.error("create connection OutOfMemoryError, out memory. ", e);
errorCount ;
if (errorCount > connectionErrorRetryAttempts && timeBetweenConnectErrorMillis > 0) {
// fail over retry attempts
setFailContinuous(true);
if (failFast) {
lock.lock();
try {
notEmpty.signalAll();
} finally {
lock.unlock();
}
}
if (breakAfterAcquireFailure) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
return;
}
this.errorCount = 0; // reset errorCount
if (closing || closed) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
return;
}
createSchedulerFuture = createScheduler.schedule(this, timeBetweenConnectErrorMillis, TimeUnit.MILLISECONDS);
return;
}
} catch (SQLException e) {
LOG.error("create connection SQLException, url: " jdbcUrl, e);
errorCount ;
if (errorCount > connectionErrorRetryAttempts && timeBetweenConnectErrorMillis > 0) {
// fail over retry attempts
setFailContinuous(true);
if (failFast) {
lock.lock();
try {
notEmpty.signalAll();
} finally {
lock.unlock();
}
}
if (breakAfterAcquireFailure) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
return;
}
this.errorCount = 0; // reset errorCount
if (closing || closed) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
return;
}
createSchedulerFuture = createScheduler.schedule(this, timeBetweenConnectErrorMillis, TimeUnit.MILLISECONDS);
return;
}
} catch (RuntimeException e) {
LOG.error("create connection RuntimeException", e);
// unknow fatal exception
setFailContinuous(true);
continue;
} catch (Error e) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
LOG.error("create connection Error", e);
// unknow fatal exception
setFailContinuous(true);
break;
} catch (Throwable e) {
lock.lock();
try {
clearCreateTask(taskId);
} finally {
lock.unlock();
}
LOG.error("create connection unexecpted error.", e);
break;
}
if (physicalConnection == null) {
continue;
}
physicalConnection.createTaskId = taskId;
boolean result = put(physicalConnection);
if (!result) {
JdbcUtils.close(physicalConnection.getPhysicalConnection());
LOG.info("put physical connection to pool failed.");
}
break;
}
}
}
CreateConnectionTask主要是创建physicalConnection，然后放到connections中。在emptyWait为true的时候会根据条件执行empty.await()
CreateConnectionThread
代码语言：javascript复制 public class CreateConnectionThread extends Thread {
public CreateConnectionThread(String name) {
super(name);
this.setDaemon(true);
}
public void run() {
initedLatch.countDown();
long lastDiscardCount = 0;
int errorCount = 0;
for (; ; ) {
// addLast
try {
lock.lockInterruptibly();
} catch (InterruptedException e2) {
break;
}
long discardCount = DruidDataSource.this.discardCount;
boolean discardChanged = discardCount - lastDiscardCount > 0;
lastDiscardCount = discardCount;
try {
boolean emptyWait = true;
if (createError != null
&& poolingCount == 0
&& !discardChanged) {
emptyWait = false;
}
if (emptyWait
&& asyncInit && createCount < initialSize) {
emptyWait = false;
}
if (emptyWait) {
// 必须存在线程等待，才创建连接
if (poolingCount >= notEmptyWaitThreadCount //
&& (!(keepAlive && activeCount poolingCount < minIdle))
&& !isFailContinuous()
) {
empty.await();
}
// 防止创建超过maxActive数量的连接
if (activeCount poolingCount >= maxActive) {
empty.await();
continue;
}
}
} catch (InterruptedException e) {
lastCreateError = e;
lastErrorTimeMillis = System.currentTimeMillis();
if ((!closing) && (!closed)) {
LOG.error("create connection Thread Interrupted, url: " jdbcUrl, e);
}
break;
} finally {
lock.unlock();
}
PhysicalConnectionInfo connection = null;
try {
connection = createPhysicalConnection();
} catch (SQLException e) {
LOG.error("create connection SQLException, url: " jdbcUrl ", errorCode " e.getErrorCode()
", state " e.getSQLState(), e);
errorCount ;
if (errorCount > connectionErrorRetryAttempts && timeBetweenConnectErrorMillis > 0) {
// fail over retry attempts
setFailContinuous(true);
if (failFast) {
lock.lock();
try {
notEmpty.signalAll();
} finally {
lock.unlock();
}
}
if (breakAfterAcquireFailure) {
break;
}
try {
Thread.sleep(timeBetweenConnectErrorMillis);
} catch (InterruptedException interruptEx) {
break;
}
}
} catch (RuntimeException e) {
LOG.error("create connection RuntimeException", e);
setFailContinuous(true);
continue;
} catch (Error e) {
LOG.error("create connection Error", e);
setFailContinuous(true);
break;
}
if (connection == null) {
continue;
}
boolean result = put(connection);
if (!result) {
JdbcUtils.close(connection.getPhysicalConnection());
LOG.info("put physical connection to pool failed.");
}
errorCount = 0; // reset errorCount
if (closing || closed) {
break;
}
}
}
}
CreateConnectionThread的逻辑与CreateConnectionTask有点类似，有不少重复的代码，不像是同一个人写的；CreateConnectionThread是在DruidDataSource的init方法中触发createAndStartCreatorThread执行的，看只执行一次
shrink
代码语言：javascript复制 public void shrink(boolean checkTime, boolean keepAlive) {
try {
lock.lockInterruptibly();
} catch (InterruptedException e) {
return;
}
boolean needFill = false;
int evictCount = 0;
int keepAliveCount = 0;
int fatalErrorIncrement = fatalErrorCount - fatalErrorCountLastShrink;
fatalErrorCountLastShrink = fatalErrorCount;
try {
if (!inited) {
return;
}
final int checkCount = poolingCount - minIdle;
final long currentTimeMillis = System.currentTimeMillis();
for (int i = 0; i < poolingCount; i) {
DruidConnectionHolder connection = connections[i];
if ((onFatalError || fatalErrorIncrement > 0) && (lastFatalErrorTimeMillis > connection.connectTimeMillis)) {
keepAliveConnections[keepAliveCount ] = connection;
continue;
}
if (checkTime) {
if (phyTimeoutMillis > 0) {
long phyConnectTimeMillis = currentTimeMillis - connection.connectTimeMillis;
if (phyConnectTimeMillis > phyTimeoutMillis) {
evictConnections[evictCount ] = connection;
continue;
}
}
long idleMillis = currentTimeMillis - connection.lastActiveTimeMillis;
if (idleMillis < minEvictableIdleTimeMillis
&& idleMillis < keepAliveBetweenTimeMillis
) {
break;
}
if (idleMillis >= minEvictableIdleTimeMillis) {
if (checkTime && i < checkCount) {
evictConnections[evictCount ] = connection;
continue;
} else if (idleMillis > maxEvictableIdleTimeMillis) {
evictConnections[evictCount ] = connection;
continue;
}
}
if (keepAlive && idleMillis >= keepAliveBetweenTimeMillis) {
keepAliveConnections[keepAliveCount ] = connection;
}
} else {
if (i < checkCount) {
evictConnections[evictCount ] = connection;
} else {
break;
}
}
}
int removeCount = evictCount keepAliveCount;
if (removeCount > 0) {
System.arraycopy(connections, removeCount, connections, 0, poolingCount - removeCount);
Arrays.fill(connections, poolingCount - removeCount, poolingCount, null);
poolingCount -= removeCount;
}
keepAliveCheckCount = keepAliveCount;
if (keepAlive && poolingCount activeCount < minIdle) {
needFill = true;
}
} finally {
lock.unlock();
}
if (evictCount > 0) {
for (int i = 0; i < evictCount; i) {
DruidConnectionHolder item = evictConnections[i];
Connection connection = item.getConnection();
JdbcUtils.close(connection);
destroyCountUpdater.incrementAndGet(this);
}
Arrays.fill(evictConnections, null);
}
if (keepAliveCount > 0) {
// keep order
for (int i = keepAliveCount - 1; i >= 0; --i) {
DruidConnectionHolder holer = keepAliveConnections[i];
Connection connection = holer.getConnection();
holer.incrementKeepAliveCheckCount();
boolean validate = false;
try {
this.validateConnection(connection);
validate = true;
} catch (Throwable error) {
if (LOG.isDebugEnabled()) {
LOG.debug("keepAliveErr", error);
}
// skip
}
boolean discard = !validate;
if (validate) {
holer.lastKeepTimeMillis = System.currentTimeMillis();
boolean putOk = put(holer, 0L, true);
if (!putOk) {
discard = true;
}
}
if (discard) {
try {
connection.close();
} catch (Exception e) {
// skip
}
lock.lock();
try {
discardCount ;
if (activeCount poolingCount <= minIdle) {
emptySignal();
}
} finally {
lock.unlock();
}
}
}
this.getDataSourceStat().addKeepAliveCheckCount(keepAliveCount);
Arrays.fill(keepAliveConnections, null);
}
if (needFill) {
lock.lock();
try {
int fillCount = minIdle - (activeCount poolingCount createTaskCount);
for (int i = 0; i < fillCount; i) {
emptySignal();
}
} finally {
lock.unlock();
}
} else if (onFatalError || fatalErrorIncrement > 0) {
lock.lock();
try {
emptySignal();
} finally {
lock.unlock();
}
}
}
DestroyConnectionThread就是每隔timeBetweenEvictionRunsMillis执行一下destroyTask，而DestroyTask的run方法主要是执行shrink(true, keepAlive) shrink方法会根据poolingCount遍历connections，在checkTime为true时会根据idleMillis判断是否需要evict，否则判断是否需要keepalive(
keepAlive && idleMillis >= keepAliveBetweenTimeMillis)，需要的话放入keepAliveConnections中，然后遍历进行validateConnection，如果成功则更新lastKeepTimeMillis，否则执行connection.close()，最后清空keepAliveConnections数组
小结
DestroyConnectionThread就是每隔timeBetweenEvictionRunsMillis执行一下destroyTask，而DestroyTask的run方法主要是执行shrink(true, keepAlive)；该方法处理了evict及keepalive的逻辑，根据poolingCount遍历connections，在checkTime为true时会根据idleMillis判断是否需要evict，否则判断是否需要keepalive(keepAlive && idleMillis >= keepAliveBetweenTimeMillis)，需要的话放入keepAliveConnections中，然后遍历进行validateConnection，如果成功则更新lastKeepTimeMillis，否则执行connection.close()，最后清空keepAliveConnections数组。
jedis的keepalive是直接设置socket.setKeepAlive(true)，而common-pools则没有所谓的keepalive，本质上druid的keepalive与common-pools的testWhileIdle类似；只不过druid直接在getConnection的时候执行testWhileIdle，这个逻辑有点奇怪，如果移除掉，而在shrink方法里头的keepAlive逻辑删除keepAliveBetweenTimeMillis判断，那么就跟common-pools的testWhileIdle的逻辑一致了。druid的keepalive相当于带了keepAliveBetweenTimeMillis的testWhileIdle。
