SAP BASIS服务器参数大全

login/min_password_lng

Defines the minimum length of the password. Default value: 3; permissible values: 3 – 40 Until SAP NetWeaver 6.40 (inclusive), up to 8characters.

login/min_password_digits

Defines the minimum number of digits (0-9) in passwords. Default value: 0; permissible values: 0 – 40 Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40(inclusive), up to 8 characters.)

login/min_password_letters

Defines the minimum number of letters (A-Z) inpasswords. Default value: 0; permissible values: 0 – 40 Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40(inclusive), up to 8 characters.)

login/min_password_specials

Defines the minimum number of special characters in thepassword Permissible special characters are, in particular, !"@$%&/()=?'`* ~#-_.,;:{[]}<>|and space After SAP NetWeaver 6.40, all characters that are not lettersor digits are regarded as special characters. Default value: 0; permissible values: 0 – 40 Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40(inclusive), up to 8 characters.)

login/password_charset

This parameter defines the characters of which a password canconsist. Permissible values: ·        0(restrictive):The password can only consist of digits, letters, and the following(ASCII) special characters :!"@$%&/()=?'`* ~#-_.,;:{[]}<>|and space ·        1(backward compatible, default value): The password can consist ofany characters including national special characters (such as ?, ?,? from ISO Latin-1, 8859-1). However, all characters that are notcontained in the set above (for value = 0) are mapped to the samespecial character, and the system therefore does not differentiatebetween them. ·        2(not backward compatible): The password can consist of anycharacters. It is converted internally into the Unicode formatUTF-8. If your system does not support Unicode, you may not be ableto enter all characters on the logon screen. This restriction islimited by the codepage specified by the systemlanguage. Withlogin/password_charset = 2, passwords arestored in a format that systems with older kernels cannotinterpret. You must therefore only set the profile parameter to thevalue 2 after you have ensured that all systems involved supportthe new password coding. Available in the standard system as of SAP Web AS 6.40.

login/min_password_diff

Defines the minimum number of characters that must bedifferent in the new password compared to the old password. Default value: 1; permissible values: 1 – 40 Available as of SAP Web AS 6.10 (Until SAP NetWeaver 6.40(inclusive), up to 8 characters.)

login/password_expiration_time

Defines the validity period of passwords in days. Default value: 0; permissible values: 0 -1000

login/password_change_for_SSO

If the user logs on with Single Sign-On, checks whether theuser must change his or her password. Available as of SAP Web AS 6.10, as of SAP Basis 4.6 bySupport Package

login/disable_password_logon

Controls the deactivation of password-based logon This means that the user can no longer log on using apassword, but only with Single Sign-On variants (X.509 certificate,logon ticket). See Logon Data Tab Page Available as of SAP Web AS 6.10, as of SAP Basis 4.6 bySupport Package

login/password_logon_usergroup

Controls the deactivation of password-based logon for usergroups Available as of SAP Web AS 6.10, as of SAP Basis 4.6 bySupport Package

login/min_password_lowercase

Specifies how many characters in lower-case letters a passwordmust contain. Permissible values: 0 – 40; default value 0 Available after SAP NetWeaver 6.40

login/min_password_uppercase

Specifies how many characters in upper-case letters a passwordmust contain. Permissible values: 0 – 40; default value 0 Available after SAP NetWeaver 6.40

login/password_history_size

Specifies the number of passwords (chosen by the user, not theadministrator) that the system stores and that the user cannot useagain. Permissible values: 1 – 100 (unit: number of entries); defaultvalue 5 Available after SAP NetWeaver 6.40

login/password_downwards_compatibility

Specifies the degree of backward compatibility to be achieved.The default value is 1, where the values have the followingmeaning: 0 Withlogin/password_downwards_compatibility=0,passwords are stored in a format that systems with older kernelscannot interpret. The system only generates new (backwardincompatible) password hash values. 1 The system also generates backward compatible password hashvalues internally, but does not evaluate these for password-basedlogons (to its own system). This setting is required, if thissystem is used as the central system of a Central UserAdministration that systems that only support backward compatiblepassword hash values are also connected to the system group. 2 The system also generates backward compatible password hashvalues internally, which it evaluates if a logon with the new,non-backward compatible password failed. In this way, the systemchecks whether the logon would have been accepted with the backwardcompatible password (truncated after eight characters, andconverted to upper-case). This is recorded in the system log. Thelogon fails. This setting is to allow the identification ofbackward incompatibility problems. 3 As with 2, but the logon is regarded as successful. Thissetting is to allow the avoidance of backward incompatibilityproblems. 4 As with 3, but no entry is created in the system log. 5 Full backward compatibility: the system only creates backwardcompatible password hash values. Available after SAP NetWeaver 6.40

login/password_change_waittime

Specifies the number of days that a user must wait beforechanging the password again. Permissible values: 1 – 1,000 (unit: days); default value1 Available after SAP NetWeaver 6.40

login/password_compliance_to_current_policy

Permissible values: 0 – no check; 1 – the system checks duringpassword logon whether the current password complies with thecurrent password rules and forces a password change if this is notthe case. Default value: 0 Available after SAP NetWeaver 6.40

login/password_max_idle_productive

Specifies the maximum period for which a productive password(a password chosen by the user) remains valid if it is not used.After this period has expired, the password can no longer be usedfor authentication. The user administrator can reactivatepassword-based logon by assigning a new initial password. Permissible values: 0 – 24,000 (unit: days); Default value 0,that is, the check is deactivated Available after SAP NetWeaver 6.40

login/password_max_idle_initial

Specifies the maximum period for which an initial password (apassword chosen by the administrator) remains valid if it is notused. After this period has expired, the password can no longer beused for authentication. The user administrator can reactivatepassword-based logon by assigning a new initial password. This parameter replaces the profileparameterslogin/password_max_new_validandlogin/password_max_reset_valid. Permissible values: 0 – 24,000 (unit: days); Default value 0,that is, the check is deactivated Available after SAP NetWeaver 6.40

login/password_max_new_valid

Defines the validity period of passwords for newly createdusers. Only available in SAP Web Application Server 6.20 and6.40.

login/password_max_reset_valid

Defines the validity period of reset passwords. Only available in SAP Web Application Server 6.20 and6.40.

login/disable_multi_gui_login

Controls the deactivation of multiple dialog logons Available as of SAP Basis 4.6

login/multi_login_users

List of excepted users (multiple logon) Available as of SAP Basis 4.6

login/fails_to_session_end

Defines the number of unsuccessful logon attempts before thesystem does not allow any more logon attempts. The parameter is tobe set to a value lower than the value of parameterlogin/fails_to_user_lock. Default value: 3; permissible values: 1 -99

login/fails_to_user_lock

Defines the number of unsuccessful logon attempts before thesystem locks the user. By default, the lock applies untilmidnight. Default value: 12; permissible values: 1 -99

login/failed_user_auto_unlock

Defines whether user locks due to unsuccessful logon attemptsshould be automatically removed at midnight. Default value: 1 (Lock applies only on same day); permissiblevalues: 0, 1

login/accept_sso2_ticket

Allows or locks the logon using SSO ticket. Available as of SAP Basis 4.6D, as of SAP Basis 4.0 by SupportPackage

login/create_sso2_ticket

Allows the creation of SSO tickets. Available as of SAP Basis 4.6D

login/ticket_expiration_time

Defines the validity period of an SSO ticket. Available as of SAP Basis 4.6D

login/ticket_only_by_https

The logon ticket is only transferred using HTTP(S). Available as of SAP Basis 4.6D

login/ticket_only_to_host

When logging on over HTTP(S), sends theticket onlyto the server that created theticket. Available as of SAP Basis 4.6D

login/disable_cpic

Refuse inbound connections of type CPIC

login/no_automatic_user_sapstar

Controls the emergency user SAP* (SAP Notes 2383 and68048)

login/system_client

Specifies the default client. This client is automaticallyfilled in on the system logon screen. Users can type in a differentclient.

login/update_logon_timestamp

Specifies the exactness of the logon timestamp. Available as of SAP Basis 4.6

rdisp/gui_auto_logout

Defines the maximum idle time for a user in seconds (appliesonly for SAP GUI connections). Default value: 0 (no restriction); permissible values: anynumerical value