一、安装RabbitMQ
代码语言：javascript复制[root@localhost ~]# docker ps
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
77926c97d516 rabbitmq:latest "docker-entrypoint.s…" 8 days ago Up 4 seconds 4369/tcp, 0.0.0.0:5672->5672/tcp, :::5672->5672/tcp, 5671/tcp, 15691-15692/tcp, 25672/tcp, 0.0.0.0:15672->15672/tcp, :::15672->15672/tcp rabbitmq二、防火墙放开端口
代码语言：javascript复制firewall-cmd --zone=public --add-port=15672/tcp --permanent三、发现访问不通
代码语言：javascript复制# 宿主机-物理机
C:Usersxiaxinyu3>telnet 192.168.163.137 15672
Connecting To 192.168.163.137...Could not open connection to the host, on port 15672: Connect failed四、ifconfig发现docker用的是docker0网卡
代码语言：javascript复制[root@localhost ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:fc:f5:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.163.137/24 brd 192.168.163.255 scope global noprefixroute ens33
valid_lft forever preferred_lft forever
inet6 fe80::9558:eab:87fc:cc8e/64 scope link noprefixroute
valid_lft forever preferred_lft forever
3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:fb:1f:63:85 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever
inet6 fe80::42:fbff:fe1f:6385/64 scope link
valid_lft forever preferred_lft forever
5: veth3b2615d@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
link/ether 9e:0e:d0:2a:09:08 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet6 fe80::9c0e:d0ff:fe2a:908/64 scope link
valid_lft forever preferred_lft forever
9: veth7c88cb2@if8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
link/ether d2:6b:be:ad:ae:57 brd ff:ff:ff:ff:ff:ff link-netnsid 2
inet6 fe80::d06b:beff:fead:ae57/64 scope link
valid_lft forever preferred_lft forever
11: veth7de00a6@if10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default
link/ether 22:57:5c:6d:84:2f brd ff:ff:ff:ff:ff:ff link-netnsid 1
inet6 fe80::2057:5cff:fe6d:842f/64 scope link
valid_lft forever preferred_lft forever五、解决：把docker0网卡添加到trusted域
代码语言：javascript复制[root@localhost ~]# firewall-cmd --permanent --zone=trusted --change-interface=docker0
success
# 剔除方法
[root@localhost ~]# firewall-cmd --zone=trusted --remove-interface=docker0
success六、重启加载配置
代码语言：javascript复制[root@localhost ~]# firewall-cmd --reload
success七、重启docker服务
代码语言：javascript复制[root@localhost ~]# systemctl restart docker八、Docker启动问题
ERROR: ZONE_CONFLICT: ‘docker0’ already bound to a zone
1.检查firewall-cmd中是否存在docker zone firewall-cmd –get-active-zones 2 .如果“docker”区域可用，将接口更改为 docker0（非持久化） sudo firewall-cmd –zone=docker –change-interface=docker0 3.如果“docker”区域可用，请将接口更改为 docker0（持久化） sudo firewall-cmd –permanent –zone=docker –change-interface=docker0 sudo systemctl restart firewalld 4 启动docker systemctl start docker systemctl status docker
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。
发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/180729.html原文链接：https://javaforall.cn
