WindowManager.LayoutParams.FLAG_SECURE_congestion window

?

android.view.ViewGroup.LayoutParams

?

android.view.WindowManager.LayoutParams

int

FLAG_ALLOW_LOCK_WHILE_SCREEN_ON

Window flag: as long as this window is visible to the user, allow the lock screen to activate while the screen is on. 当该window对用户可见的时候，允许锁屏。

int

FLAG_ALT_FOCUSABLE_IM

Window flag: invert the state of FLAG_NOT_FOCUSABLE with respect to how this window interacts with the current method.

int

FLAG_BLUR_BEHIND

Window flag: blur everything behind this window. 让该window后所有东西都模糊（blur）

int

FLAG_DIM_BEHIND

Window flag: everything behind this window will be dimmed. 让该window后所有的东西都成暗淡（dim）

int

FLAG_DISMISS_KEYGUARD

Window flag: when set the window will cause the keyguard to be dismissed, only if it is not a secure lock keyguard.

int

FLAG_DITHER

Window flag: turn on dithering when compositing this window to the screen. 开启抖动（dithering）

int

FLAG_FORCE_NOT_FULLSCREEN

Window flag: Override {@link #FLAG_FULLSCREEN and force the screen decorations (such as status bar) to be shown. 恢复window非全屏显示

int

FLAG_FULLSCREEN

Window flag: Hide all screen decorations (e.g. 让window进行全屏显示

int

FLAG_HARDWARE_ACCELERATED

Indicates whether this window should be hardware accelerated. 对该window进行硬件加速. 该flag必须在设置你的Activity或Dialog的Content View之前进行设置， 而且如果你在mainfest文件中用android:hardwareAccelerated开启了该属性的话，那么你在程序中就不能再改变它。mainfest文件中android:hardwareAccelerated属性默认是开启的(“true“)。

int

FLAG_IGNORE_CHEEK_PRESSES

Window flag: intended for windows that will often be used when the user is holding the screen against their face, it will aggressively filter the event stream to prevent unintended presses in this situation that may not be desired for a particular window, when such an event stream is detected, the application will receive a CANCEL motion event to indicate this so applications can handle this accordingly by taking no action on the event until the finger is released.

int

FLAG_KEEP_SCREEN_ON

Window flag: as long as this window is visible to the user, keep the device’s screen turned on and bright. 当该window对用户可见时，让设备屏幕处于高亮（bright）状态。

int

FLAG_LAYOUT_INSET_DECOR

Window flag: a special option only for use in combination with FLAG_LAYOUT_IN_SCREEN.

int

FLAG_LAYOUT_IN_SCREEN

Window flag: place the window within the entire screen, ignoring decorations around the border (a.k.a. 让window占满整个手机屏幕，不留任何边界（border）

int

FLAG_LAYOUT_NO_LIMITS

Window flag: allow window to extend outside of the screen. window大小不再不受手机屏幕大小限制，即window可能超出屏幕之外，这时部分内容在屏幕之外。

int

FLAG_NOT_FOCUSABLE

Window flag: this window won’t ever get key input focus, so the user can not send key or other button events to it. 让window不能获得焦点，这样用户快就不能向该window发送按键事件及按钮事件

int

FLAG_NOT_TOUCHABLE

Window flag: this window can never receive touch events. 让该window不接受触摸屏事件

int

FLAG_NOT_TOUCH_MODAL

Window flag: Even when this window is focusable (its {@link #FLAG_NOT_FOCUSABLE is not set), allow any pointer events outside of the window to be sent to the windows behind it. 即使在该window在可获得焦点情况下，仍然把该window之外的任何event发送到该window之后的其他window.

int

FLAG_SCALED

Window flag: a special mode where the layout parameters are used to perform scaling of the surface when it is composited to the screen.

int

FLAG_SECURE

Window flag: don’t allow screen shots while this window is displayed. 当该window在进行显示的时候，不允许截屏。

int

FLAG_SHOW_WALLPAPER

Window flag: ask that the system wallpaper be shown behind your window. 在该window后显示系统的墙纸（wallpaper）

int

FLAG_SHOW_WHEN_LOCKED

Window flag: special flag to let windows be shown when the screen is locked. 当锁屏的时候，显示该window.

int

FLAG_SPLIT_TOUCH

Window flag: when set the window will accept for touch events outside of its bounds to be sent to other windows that also support split touch. When this flag is not set, the first pointer that goes down determines the window to which all subsequent touches go until all pointers go up. When this flag is set, each pointer (not necessarily the first) that goes down determines the window to which all subsequent touches of that pointer will go until that pointer goes up thereby enabling touches with multiple pointers to be split across multiple windows 当该window在可以接受触摸屏情况下，让因在该window之外，而发送到后面的window的触摸屏可以支持split touch.

int

FLAG_TOUCHABLE_WHEN_WAKING

Window flag: When set, if the device is asleep when the touch screen is pressed, you will receive this first touch event. 当手机处于睡眠状态时，如果屏幕被按下，那么该window将第一个收到到事件

int

FLAG_TURN_SCREEN_ON

Window flag: when set as a window is being added or made visible, once the window has been shown then the system will poke the power manager’s user activity (as if the user had woken up the device) to turn the screen on. 当然window被显示的时候，系统将把它当做一个用户活动事件，以点亮手机屏幕。

int

FLAG_WATCH_OUTSIDE_TOUCH

Window flag: if you have set FLAG_NOT_TOUCH_MODAL, you can set this flag to receive a single special MotionEvent with the action MotionEvent.ACTION_OUTSIDE for touches that occur outside of your window. 如果你设置了该flag,那么在你FLAG_NOT_TOUNCH_MODAL的情况下，即使触摸屏事件发送在该window之外，其事件被发送到了后面的window,那么该window仍然将以MotionEvent.ACTION_OUTSIDE形式收到该触摸屏事件

int

SOFT_INPUT_ADJUST_PAN

Adjustment option for softInputMode: set to have a window pan when an input method is shown, so it doesn’t need to deal with resizing but just panned by the framework to ensure the current input focus is visible. 当显示软键盘时，调整window的空白区域来显示软键盘。 即使调整空白区域，软键盘还是有可能遮挡一些有内容区域， 这时用户就只有退出软键盘才能看到这些被遮挡区域并进行交互。

int

SOFT_INPUT_ADJUST_RESIZE

Adjustment option for softInputMode: set to allow the window to be resized when an input method is shown, so that its contents are not covered by the input method. 当显示软键盘时，调整window内的控件大小以便显示软键盘。 这样的话控件可能会变形。

int

SOFT_INPUT_ADJUST_UNSPECIFIED

Adjustment option for softInputMode: nothing specified. 不指定显示软件盘时，window的调整方式。

int

SOFT_INPUT_IS_FORWARD_NAVIGATION

Bit for softInputMode: set when the user has navigated forward to the window. 表示用户导航（navigate）到了你的window

int

SOFT_INPUT_MASK_ADJUST

Mask for softInputMode of the bits that determine the way that the window should be adjusted to accommodate the soft input window. 显示软键盘时，用于表示window调整方式的bite的mask。 显示软键盘时的window调整方式可以是 SOFT_INPUT_ADJUST_NOTHING， SOFT_INPUT_ADJUST_PAN， SOFT_INPUT_ADJUST_RESIZE， SOFT_INPUT_ADJUST_UNSPECIFIED。 用于描述软键盘显示的规则可以是 SOFT_INPUT_STATE_ALWAYS_HIDDEN， SOFT_INPUT_STATE_ALWAYS_VISIBLE， SOFT_INPUT_STATE_HIDDEN， SOFT_INPUT_STATE_VISIBLE， SOFT_INPUT_STATE_UNSPECIFIED之一

int

SOFT_INPUT_MASK_STATE

Mask for softInputMode of the bits that determine the desired visibility state of the soft input area for this window. 用于描述软键盘显示规则的bite的mask.

int

SOFT_INPUT_MODE_CHANGED

用于表示softInputMode发生了变化。关于此的详细内容请看后文。

int

SOFT_INPUT_STATE_ALWAYS_HIDDEN

Visibility state for softInputMode: please always hide any soft input area when this window receives focus. 总是隐藏软键盘。

int

SOFT_INPUT_STATE_ALWAYS_VISIBLE

Visibility state for softInputMode: please always make the soft input area visible when this window receives input focus. 总是显示软键盘

int

SOFT_INPUT_STATE_HIDDEN

Visibility state for softInputMode: please hide any soft input area when normally appropriate (when the user is navigating forward to your window). 用户导航（navigate）到你的窗口的时候,隐藏软键盘

int

SOFT_INPUT_STATE_UNCHANGED

Visibility state for softInputMode: please don’t change the state of the soft input area.

int

SOFT_INPUT_STATE_UNSPECIFIED

Visibility state for softInputMode: no state has been specified. 没有软键盘显示的约定规则

int

SOFT_INPUT_STATE_VISIBLE

Visibility state for softInputMode: please show the soft input area when normally appropriate (when the user is navigating forward to your window). 用户导航（navigate）到你的窗口的时候，显示软键盘

int

TYPE_APPLICATION_ATTACHED_DIALOG

Window type: like TYPE_APPLICATION_PANEL, but layout of the window happens as that of a top-level window, not as a child of its container. 对话框。类似于面板窗口，绘制类似于顶层窗口，而不是宿主的子窗口。

int

TYPE_APPLICATION_MEDIA

Window type: window for showing media (e.g. 媒体窗口，例如视频。显示于宿主窗口下层。

int

TYPE_APPLICATION_PANEL

Window type: a panel on top of an application window. 面板窗口，显示于宿主窗口上层

int

TYPE_APPLICATION_STARTING

Window type: special application window that is displayed while the application is starting. 用于应用程序启动时所显示的窗口。应用本身不要使用这种类型。它用于让系统显示些信息，直到应用程序可以开启自己的窗口

int

TYPE_APPLICATION_SUB_PANEL

Window type: a sub-panel on top of an application window. 应用程序窗口的子面板。显示于所有面板窗口的上层。（GUI的一般规律，越“子”越靠上）

int

TYPE_BASE_APPLICATION

Window type: an application window that serves as the “base” window of the overall application; all other application windows will appear on top of it. 所有程序窗口的“基地”窗口，其他应用程序窗口都显示在它上面。

int

TYPE_CHANGED

表示window的类型发生了变化，关于此的详细内容请看后文。

int

TYPE_INPUT_METHOD

Window type: internal input methods windows, which appear above the normal UI. 内部输入法窗口，显示于普通UI之上。应用程序可重新布局以免被此窗口覆盖

int

TYPE_INPUT_METHOD_DIALOG

Window type: internal input methods dialog windows, which appear above the current input method window. 内部输入法对话框，显示于当前输入法窗口之上

int

TYPE_KEYGUARD

Window type: keyguard window. 锁屏窗口

int

TYPE_KEYGUARD_DIALOG

Window type: dialogs that the keyguard shows 锁屏时显示的对话框

int

TYPE_PHONE

Window type: phone. 电话窗口。它用于电话交互（特别是呼入）。它置于所有应用程序之上，状态栏之下。

int

TYPE_PRIORITY_PHONE

Window type: priority phone UI, which needs to be displayed even if the keyguard is active. 电话优先，当锁屏时显示。此窗口不能获得输入焦点，否则影响锁屏。

int

TYPE_SEARCH_BAR

Window type: the search bar. 搜索栏。只能有一个搜索栏；它位于屏幕上方。

int

TYPE_STATUS_BAR

Window type: the status bar. 状态栏类型的window。只能有一个状态栏window；它位于屏幕顶端，其他窗口都位于它下方。

int

TYPE_STATUS_BAR_PANEL

Window type: panel that slides out from over the status bar 状态栏的滑动面板

int

TYPE_SYSTEM_ALERT

Window type: system window, such as low power alert. 系统提示window,比如电池低的警告。它总是出现在应用程序窗口之上。

int

TYPE_SYSTEM_DIALOG

Window type: panel that slides out from the status bar 系统对话框。（例如音量调节框）

int

TYPE_SYSTEM_ERROR

Window type: internal system error windows, appear on top of everything they can. 系统内部错误提示，显示于所有内容之上

int

TYPE_SYSTEM_OVERLAY

Window type: system overlay windows, which need to be displayed on top of everything else. 系统顶层窗口。显示在其他一切内容之上。此窗口不能获得输入焦点，否则影响锁屏。

int

TYPE_TOAST

Window type: transient notifications. toast类型的window

int

TYPE_WALLPAPER

Window type: wallpaper window, placed behind any window that wants to sit on top of the wallpaper. 用于墙纸的window

int

FIRST_SUB_WINDOW

Start of types of sub-windows. Constant Value: 1000 (0x000003e8)

int

FIRST_SYSTEM_WINDOW

Start of system-specific window types. Constant Value: 2000 (0x000007d0)

int

LAST_SUB_WINDOW

End of types of sub-windows. Constant Value: 1999 (0x000007cf)

int

LAST_SYSTEM_WINDOW

End of types of system windows. Constant Value: 2999 (0x00000bb7)

float

BRIGHTNESS_OVERRIDE_NONE

Default value for screenBrightness and buttonBrightness indicating that the brightness value is not overridden for this window and normal brightness policy should be used. 不对brightness(screenBrightness/buttonBrightness)重新进行设置，采用默认的普通值。

float

BRIGHTNESS_OVERRIDE_OFF

Value for screenBrightness and buttonBrightness indicating that the screen or button backlight brightness should be set to the lowest value when this window is in front. 把brightness(screenBrightness/buttonBrightness)设置到最低值。

int

ANIMATION_CHANGED

用于表示成员变量windowAnimations是否被改变

int

DIM_AMOUNT_CHANGED

用于表示成员变量dimAmount是否被改变

int

FLAGS_CHANGED

用于表示成员变量flags是否被改变

int

LAYOUT_CHANGED

用于表示layout是否被改变.这里的layout是指以下变量所包含的信息： width，height,x,y, verticalMargin，verticalWeight,horizontalMargin，horizontalWeight

int

SCREEN_BRIGHTNESS_CHANGED

用于表示brightness是否被改变. 这里的brightness是指以下变量对应的信息：screenBrightness，buttonBrightness

int

SCREEN_ORIENTATION_CHANGED

用于表示成员变量screenOrientation是否被改变

int

SOFT_INPUT_MODE_CHANGED

用于表示成员变量softInputMode是否被改变

int

TITLE_CHANGED

用于表示成员变量title是否被改变

int

TYPE_CHANGED

用于表示成员变量type是否被改变

int

FORMAT_CHANGED

Constant Value: 8 (0x00000008) 用于表示成员变量format是否被改变

public LayoutAnimationController.AnimationParameters

layoutAnimationParameters

Used to animate layouts.

public int

width

Information about how wide the view wants to be.

public float

alpha

An alpha value to apply to this entire window.

public float

buttonBrightness

This can be used to override the standard behavior of the button and keyboard backlights.

public float

dimAmount

When FLAG_DIM_BEHIND is set, this is the amount of dimming to apply.

public int

flags

Various behavioral options/flags.

public int

format

The desired bitmap format.

public int

gravity

Placement of window within the screen as per Gravity.

public float

horizontalMargin

The horizontal margin, as a percentage of the container’s width, between the container and the widget.

public float

horizontalWeight

Indicates how much of the extra space will be allocated horizontally to the view associated with these LayoutParams.

public int

memoryType

This field is deprecated. this is ignored

public String

packageName

Name of the package owning this window.

public float

screenBrightness

This can be used to override the user’s preferred brightness of the screen.

public int

screenOrientation

Specific orientation value for a window.

public int

softInputMode

Desired operating mode for any soft input area.

public int

systemUiVisibility

Control the visibility of the status bar.

public IBinder

token

Identifier for this window.

public int

type

The general type of window.

public float

verticalMargin

The vertical margin, as a percentage of the container’s height, between the container and the widget.

public float

verticalWeight

Indicates how much of the extra space will be allocated vertically to the view associated with these LayoutParams.

public int

windowAnimations

A style resource defining the animations to use for this window.

public int

x

X position for this window.

public int

y

Y position for this window.

final int

copyFrom( WindowManager.LayoutParams o)

String

debug( String output) Returns a String representation of this set of layout parameters.

int

describeContents() Describe the kinds of special objects contained in this Parcelable’s marshalled representation.

final CharSequence

getTitle()

static boolean

mayUseInputMethod(int flags) Given a particular set of window manager flags, determine whether such a window may be a target for an input method when it has focus.

final void

setTitle( CharSequence title)

String

toString() Returns a string containing a concise, human-readable description of this object.

void

writeToParcel( Parcel out, int parcelableFlags) Flatten this object in to a Parcel.