部署rsyslog[通俗易懂]

2022-11-08 17:27:23 浏览数 (1)

大家好，又见面了，我是你们的朋友全栈君。

为了收集一个服务的业务日志，用于监控接口超时时间，简单应用所以用rsyslog来做

一、注意事项

注意客户端和服务器端要关闭防火墙，开放相应的端口

二、升级rsyslog客户端版本

1.服务器端在centos6环境下默认版本为5.8.10，目前使用服务器端可以不用升级

代码语言：javascript复制
# rsyslogd -v
rsyslogd 5.8.10, compiled with:
        FEATURE_REGEXP:                         Yes
        FEATURE_LARGEFILE:                      No
        GSSAPI Kerberos 5 support:              Yes
        FEATURE_DEBUG (debug build, slow code): No
        32bit Atomic operations supported:      Yes
        64bit Atomic operations supported:      Yes
        Runtime Instrumentation (slow code):    No

See http://www.rsyslog.com for more information.

2.客户端的rsyslog目前需要升级，当前最新版为

代码语言：javascript复制
# rsyslogd -v
rsyslogd 8.40.0, compiled with:
        PLATFORM:                               x86_64-redhat-linux-gnu
        PLATFORM (lsb_release -d):
        FEATURE_REGEXP:                         Yes
        GSSAPI Kerberos 5 support:              No
        FEATURE_DEBUG (debug build, slow code): No
        32bit Atomic operations supported:      Yes
        64bit Atomic operations supported:      Yes
        memory allocator:                       system default
        Runtime Instrumentation (slow code):    No
        uuid support:                           Yes
        systemd support:                        No
        Number of Bits in RainerScript integers: 64

See https://www.rsyslog.com for more information.

3.客户端如果不升级，则会出现报错

代码语言：javascript复制
Jan 18 11:33:38 recallserver-12-164 kernel: imklog 5.8.10, log source = /proc/kmsg started.
Jan 18 11:33:38 recallserver-12-164 rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="68305" x-info="http://www.rsyslog.com"] st
art
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 83:"module(load="imfile" PollingInterval="5")"
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 84:"input(type="imfile""
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "log"" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 85:"File="/home/xxx/xxx.log""
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 86:"Tag="""
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 87:"Severity="debug""
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-3000: unknown priority name "" [try http://www.rsyslog.com/e/3000 ]
Jan 18 11:33:38 recallserver-12-164 rsyslogd: the last error occured in /etc/rsyslog.conf, line 88:"Facility="local2")"
Jan 18 11:33:38 recallserver-12-164 rsyslogd: warning: selector line without actions will be discarded
Jan 18 11:33:38 recallserver-12-164 rsyslogd-2124: CONFIG ERROR: could not interpret master config file '/etc/rsyslog.conf'. [try http://www.r
syslog.com/e/2124 ]

4.升级步骤 (1)yum安装

代码语言：javascript复制
# wget http://rpms.adiscon.com/v8-stable/rsyslog.repo -O /etc/yum.repos.d/rsyslog.repo
# yum update rsyslog

(2)手动下载yum包 由于有些机器没开外网访问换，所以我在其它机器上下载了rpm包传到这台再安装，安装需要libestr和libfastjson4这两个依赖包，所以需要三个rpm包。再卸载自带的rsyslog的时候由于有依赖关系所以在使用rpm卸载的时候需要加上强制卸载的参数。浏览器下载访问：http://rpms.adiscon.com/v8-stable/epel-6/x86_64/RPMS/

代码语言：javascript复制
# rpm -qa|grep rsyslog
# rpm -e --nodeps rsyslog-5.8.10-10.el6_6.x86_64
# wget http://rpms.adiscon.com/v8-stable/epel-6/x86_64/RPMS/libestr-0.1.11-1.el6.x86_64.rpm
# wget http://rpms.adiscon.com/v8-stable/epel-6/x86_64/RPMS/libfastjson4-0.99.8-1.el6.x86_64.rpm
# wget http://rpms.adiscon.com/v8-stable/epel-6/x86_64/RPMS/rsyslog-8.40.0-1.el6.x86_64.rpm
# rpm -ivh libestr-0.1.11-1.el6.x86_64.rpm libfastjson4-0.99.8-1.el6.x86_64.rpm rsyslog-8.40.0-1.el6.x86_64.rpm

安装完成后检查版本

代码语言：javascript复制
# rsyslogd -v
rsyslogd 8.40.0, compiled with:
        PLATFORM:                               x86_64-redhat-linux-gnu
        PLATFORM (lsb_release -d):
        FEATURE_REGEXP:                         Yes
        GSSAPI Kerberos 5 support:              No
        FEATURE_DEBUG (debug build, slow code): No
        32bit Atomic operations supported:      Yes
        64bit Atomic operations supported:      Yes
        memory allocator:                       system default
        Runtime Instrumentation (slow code):    No
        uuid support:                           Yes
        systemd support:                        No
        Number of Bits in RainerScript integers: 64

See https://www.rsyslog.com for more information.
三、客户端配置

module(load=“imfile” PollingInterval=“5”)：加载imfile模块，日志推送的间隔是5秒，默认为10秒，不建议设置为0，否则一致占用cpu增加使用率，生产环境如果日志量大有可能会有影响 type=“imfile”：固定的配置，直接复制使用 File=”/home/homework/xxx.log”：需要发送的日志路径和名称 Tag=“mall-order_debug”：tag标签，自行定义 Severity=“debug”：日志级别，自己定义 Facility=“local2”：日志分类，自己定义，范围1-7 local2.* @xx.xx.xx.xx:514：local2的所有级别的日志，试用udp发送到xx服务器的514端口，端口默认即可

代码语言：javascript复制
# vim /etc/rsyslog.conf
....
$ModLoad imudp
$UDPServerRun 514
......
module(load="imfile" PollingInterval="5")
input(type="imfile"
File="/home/homework/log/mall-order/mall-order_debug.log"
Tag="mall-order_debug"
Severity="debug"
Facility="local2")
local2.* @192.168.240.201:514
四、服务端配置

template SpiceTmpl……：定义接收日志的格式，主机名 日志信息，最后换行 template MallOrderLog……：定义接收日志的路径和名称，日志后缀为日期格式 :msg, contains, “requestPay” ?MallOrderLog;SpiceTmpl：这行的意思是接收的日志中如果含有requestPay字符的，使用MallOrderLog模板和SpiceTmpl日志格式存储

代码语言：javascript复制
......
# 下面的配置是设置接收日志目录和文件的权限，否则将会以root权限和系统默认权限创建目录和文件
$FileOwner homework
$FileGroup homework
$FileCreateMode 0600
$DirCreateMode 0755
......
$template SpiceTmpl,"%hostname% %msg:2:$%n"
$template MallOrderLog,"/home/xxx/xxx.log.%$YEAR%-%$MONTH%-%$DAY%"
:msg, contains, "requestPay" ?MallOrderLog;SpiceTmpl
& ~
......

测试配置文件语法，之前不知道，后来发现有这个命令，现在添加上，如果配置文件正常则是下面的显示

代码语言：javascript复制
# rsyslogd -f /etc/rsyslog.conf -N1
rsyslogd: version 8.40.0, config validation run (level 1), master config /etc/rsyslog.conf
rsyslogd: End of config validation run. Bye.

如果检查语法错误，则输出如下

代码语言：javascript复制
# rsyslogd -f /etc/rsyslog.conf -N1
rsyslogd: version 8.40.0, config validation run (level 1), master config /etc/rsyslog.conf
rsyslogd: error during parsing file /etc/rsyslog.conf, on or before line 55: warnings occured in file '/etc/rsyslog.conf' around line 55 [v8.40.0 try https://www.rsyslog.com/e/2207 ]

如果不检查语法就启动，日志也会出现错误信息。比如配置文件中local2.debug ?MallOrderLog中间使用多个空格分隔，会因为语法问题出现报错，虽然服务起来了，但是配置未生效。需要去掉多余的空格后再检查配置语法，确保正常在重启服务。

代码语言：javascript复制
# less /var/log/messages
rdqa-rd-test176  [origin software="rsyslogd" swVersion="5.8.10" x-pid="14880" x-info="http://www.rsyslog.com"] exiting on signal 15.
rdqa-rd-test176 imklog 5.8.10, log source = /proc/kmsg started.
rdqa-rd-test176  [origin software="rsyslogd" swVersion="5.8.10" x-pid="15074" x-info="http://www.rsyslog.com"] start
rdqa-rd-test176  Could not find template 'MallOrderLog' - action disabled
 [try http://www.rsyslog.com/e/3003 ]
rdqa-rd-test176 the last error occured in /etc/rsyslog.conf, line 98:"local2.debug  ?MallOrderLog"
rdqa-rd-test176 CONFIG ERROR: could not interpret master config file '/etc/rsyslog.conf'. [try http://www.rsyslog.com/e/2124 ]

再次重启服务，检查无错误说明配置都正常

代码语言：javascript复制
# less /var/log/messages
rdqa-rd-test176 Kernel logging (proc) stopped.
rdqa-rd-test176  [origin software="rsyslogd" swVersion="5.8.10" x-pid="37696" x-info="http://www.rsyslog.com"] exiting on signal 15.
rdqa-rd-test176 imklog 5.8.10, log source = /proc/kmsg started.
rdqa-rd-test176  [origin software="rsyslogd" swVersion="5.8.10" x-pid="68403" x-info="http://www.rsyslog.com"] start

重启服务正常，检查日志无错误后，查看需要接收的日志是否生成即可。

版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。

yum

0 人点赞