大家好，又见面了，我是你们的朋友全栈君。
三分钟安装k8s-v1.20.8版本
1.所有机器关闭防火墙，selinux,配置hosts 修改主机名称：
代码语言：javascript复制cat /etc/hostname
k8s-master
cat /etc/hosts
k8s-master 192.168.1.15
k8s-node1 192.168.1.16
k8s-node2 192.168.1.17
systemctl stop firewalld
systemctl disable firewalld
setenforce 0
sed -i 's/=enforcing/=disabled/g' /etc/selinux/config2.关闭swap分区
代码语言：javascript复制swapoff -a #临时
sed -i '/swap/s/^/#/' /etc/fstab #永久3.修改内核参数
代码语言：javascript复制vi /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
vm.swappiness = 04.内核参数生效
代码语言：javascript复制modprobe br_netfilter && sysctl -p /etc/sysctl.d/k8s.conf5.启用ipvs内核模块
代码语言：javascript复制vim /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
ipvs_mods_dir="/usr/lib/modules/$(uname -r)/kernel/net/netfilter/ipvs"
for i in $(ls $ipvs_mods_dir | grep -o "^[^.]*");do
/sbin/modinfo -F filename $i &>/dev/null
if [ $? -eq 0 ];then
/sbin/modprobe $i
fi
done
chmod x /etc/sysconfig/modules/ipvs.modules
bash /etc/sysconfig/modules/ipvs.modules6.添加docker-yum仓库
代码语言：javascript复制cd /etc/yum.repos.d/
wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo7.添加kubernetes-yum仓库
代码语言：javascript复制cat /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes Repo
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
enabled=18.查看版本并选择安装。
代码语言：javascript复制yum list |grep kubeadm
yum install - y docker-ce kubelet-1.20.8 kubeadm-1.20.8 kubectl-1.20.8 
9.启动
代码语言：javascript复制systemctl start docker && systemctl enable docker
systemctl start kubelet &&systemctl enable kubelet安装部署（master节点执行下面的，上面是所有集群执行。）
代码语言：javascript复制kubeadm init --kubernetes-version=v1.20.8 --apiserver-advertise-address=192.168.1.82 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --image-repository registry.aliyuncs.com/google_containers #apiserver-advertise-address改成自己的master地址，其他不用动11.如果部署出现问题，解决问题之后再使用kubeadm清除一次再重新执行上面命令。
代码语言：javascript复制kubeadm reset -f
kubeadm init --kubernetes-version=v1.20.8 --apiserver-advertise-address=192.168.1.82 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --image-repository registry.aliyuncs.com/google_containers12.执行成功的显示：
代码语言：javascript复制....
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
Then you can join any number of worker nodes by running the following on each as root:
kubeadm join
...13.执行上面的命令：
代码语言：javascript复制 mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config14.在node执行kubeadmin join … 加入集群之中(上面已显示的内容)。
代码语言：javascript复制kubeadm join 172.16.186.1.82:6443 --token 27kdvx.asd123453534sdf123
--discovery-token-ca-cert-hash sha256:45656756sdfsdfsd8916515646516545165115.查看node节点和其他组件：
代码语言：javascript复制#kubectl get nodes
NAME STATUS ROLES AGE VERSION
master01 NotReady control-plane,master 14m v1.20.8
node01 NotReady <none> 8m46s v1.20.8
node02 NotReady <none> 8m30s v1.20.8
#kubectl get pod -n kube-systemflannel起来了NotReady 才变成Ready 。
16.安装网络插件flannel
代码语言：javascript复制cat kube-flannel.yml
---
apiVersion: policy/v1beta1
kind: PodSecurityPolicy
metadata:
name: psp.flannel.unprivileged
annotations:
seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default
seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default
apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default
apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/default
spec:
privileged: false
volumes:
- configMap
- secret
- emptyDir
- hostPath
allowedHostPaths:
- pathPrefix: "/etc/cni/net.d"
- pathPrefix: "/etc/kube-flannel"
- pathPrefix: "/run/flannel"
readOnlyRootFilesystem: false
# Users and groups
runAsUser:
rule: RunAsAny
supplementalGroups:
rule: RunAsAny
fsGroup:
rule: RunAsAny
# Privilege Escalation
allowPrivilegeEscalation: false
defaultAllowPrivilegeEscalation: false
# Capabilities
allowedCapabilities: ['NET_ADMIN', 'NET_RAW']
defaultAddCapabilities: []
requiredDropCapabilities: []
# Host namespaces
hostPID: false
hostIPC: false
hostNetwork: true
hostPorts:
- min: 0
max: 65535
# SELinux
seLinux:
# SELinux is unused in CaaSP
rule: 'RunAsAny'
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: flannel
rules:
- apiGroups: ['extensions']
resources: ['podsecuritypolicies']
verbs: ['use']
resourceNames: ['psp.flannel.unprivileged']
- apiGroups:
- ""
resources:
- pods
verbs:
- get
- apiGroups:
- ""
resources:
- nodes
verbs:
- list
- watch
- apiGroups:
- ""
resources:
- nodes/status
verbs:
- patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
name: flannel
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: flannel
subjects:
- kind: ServiceAccount
name: flannel
namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: flannel
namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
name: kube-flannel-cfg
namespace: kube-system
labels:
tier: node
app: flannel
data:
cni-conf.json: |
{
"name": "cbr0",
"cniVersion": "0.3.1",
"plugins": [
{
"type": "flannel",
"delegate": {
"hairpinMode": true,
"isDefaultGateway": true
}
},
{
"type": "portmap",
"capabilities": {
"portMappings": true
}
}
]
}
net-conf.json: |
{
"Network": "10.244.0.0/16",
"Backend": {
"Type": "vxlan"
}
}
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: kube-flannel-ds
namespace: kube-system
labels:
tier: node
app: flannel
spec:
selector:
matchLabels:
app: flannel
template:
metadata:
labels:
tier: node
app: flannel
spec:
affinity:
nodeAffinity:
requiredDuringSchedulingIgnoredDuringExecution:
nodeSelectorTerms:
- matchExpressions:
- key: kubernetes.io/os
operator: In
values:
- linux
hostNetwork: true
priorityClassName: system-node-critical
tolerations:
- operator: Exists
effect: NoSchedule
serviceAccountName: flannel
initContainers:
- name: install-cni
image: quay.io/coreos/flannel:v0.14.0
command:
- cp
args:
- -f
- /etc/kube-flannel/cni-conf.json
- /etc/cni/net.d/10-flannel.conflist
volumeMounts:
- name: cni
mountPath: /etc/cni/net.d
- name: flannel-cfg
mountPath: /etc/kube-flannel/
containers:
- name: kube-flannel
image: quay.io/coreos/flannel:v0.14.0
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
resources:
requests:
cpu: "100m"
memory: "50Mi"
limits:
cpu: "100m"
memory: "50Mi"
securityContext:
privileged: false
capabilities:
add: ["NET_ADMIN", "NET_RAW"]
env:
- name: POD_NAME
valueFrom:
fieldRef:
fieldPath: metadata.name
- name: POD_NAMESPACE
valueFrom:
fieldRef:
fieldPath: metadata.namespace
volumeMounts:
- name: run
mountPath: /run/flannel
- name: flannel-cfg
mountPath: /etc/kube-flannel/
volumes:
- name: run
hostPath:
path: /run/flannel
- name: cni
hostPath:
path: /etc/cni/net.d
- name: flannel-cfg
configMap:
name: kube-flannel-cfg17.启动kube-flannel.yaml文件
代码语言：javascript复制kubectl apply -f kube-flannel.yml #镜像因该会拉取很慢，可以手动拉取，或者从其他地方拉取。18.启动之后如下图及安装成功：
19.插入一个小问题： kubeadm安装的k8s集群获取kube-scheduler和kube-controller-manager组件状态异常，一般都会有。
代码语言：javascript复制#kubectl get cs
NAME STATUS MESSAGE ERROR
controller-manager Unhealthy Get http://127.0.0.1:10252/healthz: dial tcp 127.0.0.1:10252: connect: connection refused
scheduler Unhealthy Get http://127.0.0.1:10251/healthz: dial tcp 127.0.0.1:10251: connect: connection refused
etcd-0 Healthy {"health":"true"}20.去配置文件路径修改：/etc/kubernetes/manifests/kube-scheduler.yaml 、/etc/kubernetes/manifests/kube-controller-manager.yaml
代码语言：javascript复制cd /etc/kubernetes/manifests/
vim kube-controller-manager.yaml #注释掉port=0
vim kube-scheduler.yaml #注释掉port=0
21.重启并查看服务。
代码语言：javascript复制systemctl restart kubelet
kubectl get cs如下：
２２．ｔａｂ补全：
代码语言：javascript复制yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
echo "source <(kubectl completion bash)" >> ~/.bashrc23. k8s基础命令附上几条：
代码语言：javascript复制kubectl create ns test #创建名称空间
kubectl get deployment -n test # -n指名称空间。
kubectl get pods
kubectl get pods -o wide
kubectl get pods --show-labels #查看pod的标签：
kubectl describe pods myapp-7c468db58f-2dqrh -n test #describe 详情
kubectl delete pods nginx-deplog-5476b95b8-tdsjs -n test
kubectl get service
kubectl edit svc nginx #编辑
kubectl delete svc nginx
kubectl scale --replicas=5 deployment myapp #扩容数量
kubectl rollout undo deployment myapp #回滚到上一个版本
kubectl get nodes #查看所有主从节点的状态
kubectl get ns #获取所有namespace资源
kubectl get pods -n {$nameSpace} #获取指定namespace的pod
kubectl describe pod的名称 -n {$nameSpace}
kubectl create -f xxx.yml #通过配置文件创建一个集群资源对象
kubectl delete -f xxx.yml #通过配置文件删除一个集群资源对象
kubectl delete pod名称 -n {$nameSpace} #通过pod删除集群资源
kubectl exec podname -n test bash #进入pod
kubectl logs podname -n test #查看日志如果报错添加下面，docker不兼容：
cat >/etc/docker/daemon.json <<EOF { "exec-opts": ["native.cgroupdriver=systemd"], "log-driver": "json-file", "log-opts":{ "max-size": "100m" } } EOF先就写这么几条吧！ 。。。。。。。。。。。。。。。。END。。。。。。。。。。。。。。。。。。。。
版权声明：本文内容由互联网用户自发贡献，该文观点仅代表作者本人。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容， 请发送邮件至 举报，一经查实，本站将立刻删除。
