继续上篇 https://www.backendcloud.cn/2022/06/06/macvtap-lab/ 上篇是纯手动，这篇是借助Kubernetes KubeVirt自动。
部署Kubernetes KubeVirt
部署Kubernetes参考： https://www.backendcloud.cn/2022/06/02/k8s-4-deploy/#KubeSpray
用kubepray部署前可以修改配置文件打开multus cni选项
部署KubeVirt参考：https://www.backendcloud.cn/2022/05/06/deploy-kubevirt/#deploy-KubeVirt
部署multus cni，macvtap cni，创建macvtap interface vm
代码语言：javascript复制[root@node1 ~]# curl https://raw.githubusercontent.com/kubevirt/macvtap-cni/main/examples/macvtap-deviceplugin-config-explicit.yamlkind: ConfigMap
apiVersion: v1
metadata:
name: macvtap-deviceplugin-config
data:
DP_MACVTAP_CONF: >- [ {
"name" : "dataplane", "lowerDevice" : "ens33", "mode": "bridge", "capacity" : 50
} ][root@node1 ~]# kubectl apply -f https://raw.githubusercontent.com/kubevirt/macvtap-cni/main/examples/macvtap-deviceplugin-config-explicit.yamlconfigmap/macvtap-deviceplugin-config created[root@node1 ~]# curl https://raw.githubusercontent.com/kubevirt/macvtap-cni/main/manifests/macvtap.yamlapiVersion: apps/v1
kind: DaemonSet
metadata:
name: macvtap-cni
namespace: default
spec:
selector:
matchLabels:
name: macvtap-cni
template:
metadata:
labels:
name: macvtap-cni
spec:
hostNetwork: true
hostPID: true
priorityClassName: system-node-critical
containers:
- name: macvtap-cni command: ["/macvtap-deviceplugin", "-v", "3", "-logtostderr"]
envFrom:
- configMapRef:
name: macvtap-deviceplugin-config
image: quay.io/kubevirt/macvtap-cni:latest
imagePullPolicy: Always
resources:
requests:
cpu: "60m"
memory: "30Mi"
securityContext:
privileged: true
volumeMounts:
- name: deviceplugin
mountPath: /var/lib/kubelet/device-plugins
initContainers:
- name: install-cni command: ["cp", "/macvtap-cni", "/host/opt/cni/bin/macvtap"]
image: quay.io/kubevirt/macvtap-cni:latest
imagePullPolicy: Always
resources:
requests:
cpu: "10m"
memory: "15Mi"
securityContext:
privileged: true
volumeMounts:
- name: cni
mountPath: /host/opt/cni/bin
mountPropagation: Bidirectional
volumes:
- name: deviceplugin
hostPath:
path: /var/lib/kubelet/device-plugins
- name: cni
hostPath:
path: /opt/cni/bin[root@node1 ~]# kubectl apply -f https://raw.githubusercontent.com/kubevirt/macvtap-cni/main/manifests/macvtap.yamldaemonset.apps/macvtap-cni created[root@node1 ~]# kubectl get podsNAME READY STATUS RESTARTS AGE
macvtap-cni-bz47n 1/1 Running 0 96s[root@node1 ~]# cat nad.yaml kind: NetworkAttachmentDefinition
apiVersion: k8s.cni.cncf.io/v1
metadata:
name: dataplane
annotations:
k8s.v1.cni.cncf.io/resourceName: macvtap.network.kubevirt.io/dataplane
spec:
config: '{
"cniVersion": "0.3.1",
"name": "dataplane",
"type": "macvtap",
"mtu": 1500
}'[root@node1 ~]# kubectl create -f nad.yaml networkattachmentdefinition.k8s.cni.cncf.io/dataplane created[root@node1 ~]# cat macvtap-pod.yamlapiVersion: v1
kind: Pod
metadata:
name: macvtap-pod
annotations:
k8s.v1.cni.cncf.io/networks: dataplane
spec:
containers:
- name: busybox
image: busybox command: ["/bin/sleep", "1800"]
resources:
limits:
macvtap.network.kubevirt.io/dataplane: 1 [root@node1 ~]# kubectl create -f macvtap-pod.yaml pod/macvtap-pod created[root@node1 ~]# kubectl get podNAME READY STATUS RESTARTS AGE
macvtap-cni-fzms6 1/1 Running 0 3m1s
macvtap-pod 1/1 Running 0 23s[root@node1 ~]# kubectl exec -it macvtap-pod -- sh/ # ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever3: eth0@if10: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue
link/ether d2:fb:f6:e0:90:b7 brd ff:ff:ff:ff:ff:ff
inet 10.233.90.9/32 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::d0fb:f6ff:fee0:90b7/64 scope link
valid_lft forever preferred_lft forever9: net1@if2: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 16:5c:62:d6:17:f4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::145c:62ff:fed6:17f4/64 scope link
valid_lft forever preferred_lft forever
/ # exit[root@node1 ~]# cat macvtap-pod-with-mac.yamlapiVersion: v1
kind: Pod
metadata:
name: macvtap-pod-with-mac
annotations:
k8s.v1.cni.cncf.io/networks: |
[
{
"name":"dataplane", "mac": "02:23:45:67:89:01"
}
]spec:
containers:
- name: busybox
image: busybox command: ["/bin/sleep", "1800"]
resources:
limits:
macvtap.network.kubevirt.io/dataplane: 1 [root@node1 ~]# kubectl create -f macvtap-pod-with-mac.yaml pod/macvtap-pod-with-mac created[root@node1 ~]# kubectl get podNAME READY STATUS RESTARTS AGE
macvtap-cni-fzms6 1/1 Running 0 7m52s
macvtap-pod 1/1 Running 0 5m14s
macvtap-pod-with-mac 1/1 Running 0 13s[root@node1 ~]# kubectl exec -it macvtap-pod-with-mac -- sh/ # ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever3: eth0@if12: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1450 qdisc noqueue
link/ether 3a:c9:74:39:1b:a5 brd ff:ff:ff:ff:ff:ff
inet 10.233.90.10/32 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::38c9:74ff:fe39:1ba5/64 scope link
valid_lft forever preferred_lft forever11: net1@if2: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 02:23:45:67:89:01 brd ff:ff:ff:ff:ff:ff
inet6 fe80::23:45ff:fe67:8901/64 scope link
valid_lft forever preferred_lft forever
/ # exit[root@node1 ~]#language-bash复制代码登录容器执行ip a后发现net1@if2的mac地址和macvtap-pod-with-mac.yaml一致。
查看node的macvtap资源：
代码语言：javascript复制[root@node1 ~]# kubectl describe nodeCapacity:
cpu: 4
ephemeral-storage: 125251836Ki
hugepages-1Gi: 0
hugepages-2Mi: 0
macvtap.network.kubevirt.io/dataplane: 50
memory: 15141680Ki
pods: 110Allocatable:
cpu: 3800m
ephemeral-storage: 115432091867
hugepages-1Gi: 0
hugepages-2Mi: 0
macvtap.network.kubevirt.io/dataplane: 50
memory: 14514992Ki
pods: 110System Info:
Machine ID: 291c4d5a11c74407b8c7c40c2f64366e
System UUID: 9E724D56-7BD3-A8D6-10E8-FECB3AC7D0BC
Boot ID: 8c342553-08ac-4795-9e98-3594f3ee9189
Kernel Version: 3.10.0-1160.el7.x86_64
OS Image: CentOS Linux 7 (Core)
Operating System: linux
Architecture: amd64
Container Runtime Version: containerd://1.6.4
Kubelet Version: v1.23.7
Kube-Proxy Version: v1.23.7
PodCIDR: 10.233.64.0/24
PodCIDRs: 10.233.64.0/24
Non-terminated Pods: (13 in total)
Namespace Name CPU Requests CPU Limits Memory Requests Memory Limits Age
--------- ---- ------------ ---------- --------------- ------------- ---
default macvtap-cni-fzms6 60m (1%) 0 (0%) 30Mi (0%) 0 (0%) 15m
default macvtap-pod 0 (0%) 0 (0%) 0 (0%) 0 (0%) 12m
default macvtap-pod-with-mac 0 (0%) 0 (0%) 0 (0%) 0 (0%) 7m41s
kube-system calico-kube-controllers-6dd874f784-hvmvs 30m (0%) 1 (26%) 64M (0%) 256M (1%) 4d15h
kube-system calico-node-vtqr7 150m (3%) 300m (7%) 64M (0%) 500M (3%) 4d15h
kube-system coredns-76b4fb4578-x6ts9 100m (2%) 0 (0%) 70Mi (0%) 170Mi (1%) 4d15h
kube-system dns-autoscaler-7874cf6bcf-kv825 20m (0%) 0 (0%) 10Mi (0%) 0 (0%) 4d15h
kube-system kube-apiserver-node1 250m (6%) 0 (0%) 0 (0%) 0 (0%) 4d15h
kube-system kube-controller-manager-node1 200m (5%) 0 (0%) 0 (0%) 0 (0%) 4d15h
kube-system kube-multus-ds-amd64-c5g9l 100m (2%) 100m (2%) 90Mi (0%) 90Mi (0%) 4d15h
kube-system kube-proxy-pxcb8 0 (0%) 0 (0%) 0 (0%) 0 (0%) 4d15h
kube-system kube-scheduler-node1 100m (2%) 0 (0%) 0 (0%) 0 (0%) 4d15h
kube-system nodelocaldns-twg9b 100m (2%) 0 (0%) 70Mi (0%) 170Mi (1%) 4d15h
Allocated resources: (Total limits may be over 100 percent, i.e., overcommitted.)
Resource Requests Limits
-------- -------- ------
cpu 1110m (29%) 1400m (36%)
memory 401480Ki (2%) 1206887680 (8%)
ephemeral-storage 0 (0%) 0 (0%)
hugepages-1Gi 0 (0%) 0 (0%)
hugepages-2Mi 0 (0%) 0 (0%)
macvtap.network.kubevirt.io/dataplane 2 2language-bash复制代码cluster-network-addons-operator 部署多个网络插件
代码语言：javascript复制上面是通过手动一个个部署cni网络插件，也可以通过cluster-network-addons-operator批量部署cni。
下面再做些不同cni的实验。KubeVirt将虚拟机连接到网络，分成两个部分，分别是前端和后端，后端只有pod（默认Kubernetes网络）和multus两种网络，前端目前支持bridge，masquerade，sriov，slirp，macvtap五种。
可以将后端理解成虚拟所在的 lanch pod 的网络或者 Kubernetes 提供给虚拟机的网络资源，前端是绑定方式。
# 部署以下网络插件[root@localhost ~]# curl https://github.com/kubevirt/cluster-network-addons-operator/releases/download/v0.77.0/network-addons-config-example.cr.yamlapiVersion: networkaddonsoperator.network.kubevirt.io/v1
kind: NetworkAddonsConfig
metadata:
name: cluster
spec:
multus: {}
linuxBridge: {}
kubeMacPool: {}
ovs: {}
macvtap: {}
imagePullPolicy: Always[root@localhost net.d]# kubectl apply -f https://github.com/kubevirt/cluster-network-addons-operator/releases/download/v0.77.0/namespace.yamlnamespace/cluster-network-addons created[root@localhost net.d]# cd[root@localhost ~]# kubectl apply -f https://github.com/kubevirt/cluster-network-addons-operator/releases/download/v0.77.0/network-addons-config.crd.yamlcustomresourcedefinition.apiextensions.k8s.io/networkaddonsconfigs.networkaddonsoperator.network.kubevirt.io created[root@localhost ~]# kubectl apply -f https://github.com/kubevirt/cluster-network-addons-operator/releases/download/v0.77.0/operator.yamlserviceaccount/cluster-network-addons-operator created
clusterrole.rbac.authorization.k8s.io/cluster-network-addons-operator created
clusterrolebinding.rbac.authorization.k8s.io/cluster-network-addons-operator created
role.rbac.authorization.k8s.io/cluster-network-addons-operator created
rolebinding.rbac.authorization.k8s.io/cluster-network-addons-operator created
deployment.apps/cluster-network-addons-operator created[root@localhost ~]# kubectl apply -f https://github.com/kubevirt/cluster-network-addons-operator/releases/download/v0.77.0/network-addons-config-example.cr.yamlnetworkaddonsconfig.networkaddonsoperator.network.kubevirt.io/cluster created[root@localhost ~]# kubectl wait networkaddonsconfig cluster --for condition=Available^C[root@localhost ~]# kubectl get pod -ANAMESPACE NAME READY STATUS RESTARTS AGE
cluster-network-addons bridge-marker-swlrn 0/1 ContainerCreating 0 4s
cluster-network-addons cluster-network-addons-operator-7dd77c99f9-flrs2 0/2 ContainerCreating 0 27s
cluster-network-addons kube-cni-linux-bridge-plugin-5r2j9 0/1 ContainerCreating 0 4s
cluster-network-addons kubemacpool-cert-manager-7bf5598748-hp4b9 0/1 ContainerCreating 0 4s
cluster-network-addons kubemacpool-mac-controller-manager-b9886f757-w4sx8 0/2 ContainerCreating 0 4s
cluster-network-addons macvtap-cni-tlcz5 0/1 Init:0/1 0 3s
cluster-network-addons multus-dr2fp 0/1 ContainerCreating 0 4s
cluster-network-addons ovs-cni-amd64-8ds2s 0/1 Init:0/1 0 3s
kube-system calico-kube-controllers-6dd874f784-xw4hn 1/1 Running 0 3h13m
kube-system calico-node-9g6m6 1/1 Running 0 3h13m
kube-system coredns-76b4fb4578-tzbln 1/1 Running 0 3h2m
kube-system dns-autoscaler-7874cf6bcf-v9pml 1/1 Running 0 3h13m
kube-system kube-apiserver-node1 1/1 Running 1 3h14m
kube-system kube-controller-manager-node1 1/1 Running 1 3h14m
kube-system kube-proxy-fnb9z 1/1 Running 0 3h13m
kube-system kube-scheduler-node1 1/1 Running 1 3h14m
kube-system nodelocaldns-zs2lc 1/1 Running 0 3h13m
kubevirt virt-api-667d949cc5-9qb9r 1/1 Running 0 171m
kubevirt virt-api-667d949cc5-b9pgr 1/1 Running 0 171m
kubevirt virt-controller-7f8f9f9c76-cbtvd 1/1 Running 0 170m
kubevirt virt-controller-7f8f9f9c76-p6rrj 1/1 Running 0 170m
kubevirt virt-handler-w9dms 1/1 Running 0 170m
kubevirt virt-operator-7d9c58f7cf-8b5ms 1/1 Running 0 171m
kubevirt virt-operator-7d9c58f7cf-p5b5t 1/1 Running 0 171m# 等待一段时间[root@localhost ~]# kubectl get pod -ANAMESPACE NAME READY STATUS RESTARTS AGE
cluster-network-addons bridge-marker-swlrn 1/1 Running 0 2m45s
cluster-network-addons cluster-network-addons-operator-7dd77c99f9-flrs2 2/2 Running 0 3m8s
cluster-network-addons kube-cni-linux-bridge-plugin-5r2j9 1/1 Running 0 2m45s
cluster-network-addons kubemacpool-cert-manager-7bf5598748-hp4b9 1/1 Running 0 2m45s
cluster-network-addons kubemacpool-mac-controller-manager-b9886f757-w4sx8 2/2 Running 0 2m45s
cluster-network-addons macvtap-cni-tlcz5 1/1 Running 0 2m44s
cluster-network-addons multus-dr2fp 1/1 Running 0 2m45s
cluster-network-addons ovs-cni-amd64-8ds2s 1/1 Running 0 2m44s
kube-system calico-kube-controllers-6dd874f784-xw4hn 1/1 Running 0 3h16m
kube-system calico-node-9g6m6 1/1 Running 0 3h16m
kube-system coredns-76b4fb4578-tzbln 1/1 Running 0 3h4m
kube-system dns-autoscaler-7874cf6bcf-v9pml 1/1 Running 0 3h15m
kube-system kube-apiserver-node1 1/1 Running 1 3h16m
kube-system kube-controller-manager-node1 1/1 Running 1 3h16m
kube-system kube-proxy-fnb9z 1/1 Running 0 3h16m
kube-system kube-scheduler-node1 1/1 Running 1 3h16m
kube-system nodelocaldns-zs2lc 1/1 Running 0 3h15m
kubevirt virt-api-667d949cc5-9qb9r 1/1 Running 0 174m
kubevirt virt-api-667d949cc5-b9pgr 1/1 Running 0 174m
kubevirt virt-controller-7f8f9f9c76-cbtvd 1/1 Running 0 173m
kubevirt virt-controller-7f8f9f9c76-p6rrj 1/1 Running 0 173m
kubevirt virt-handler-w9dms 1/1 Running 0 173m
kubevirt virt-operator-7d9c58f7cf-8b5ms 1/1 Running 0 174m
kubevirt virt-operator-7d9c58f7cf-p5b5t 1/1 Running 0 174mlanguage-bash复制代码安装 ovs
代码语言：javascript复制#安装依赖：[root@ovs02 ~]# yum install wget openssl-devel python-sphinx gcc make python-devel openssl-devel kernel-devel graphviz kernel-debug-devel autoconf automake rpm-build redhat-rpm-config libtool python-twisted-core python-zope-interface PyQt4 desktop-file-utils libcap-ng-devel groff checkpolicy selinux-policy-devel gcc-c python-six unbound unbound-devel -y#下载 ovs 压缩包：[root@ovs02 ~]# wget https://www.openvswitch.org/releases/openvswitch-2.11.0.tar.gz --no-check-certificate#构建 build 目录：[root@ovs02 ~]# mkdir -p ~/rpmbuild/SOURCES[root@ovs02 ~]# mv openvswitch-2.11.0.tar.gz /root/rpmbuild/SOURCES/[root@ovs02 ~]# cd /root/rpmbuild/SOURCES/[root@ovs02 ~]# tar -xvzf openvswitch-2.11.0.tar.gz#构建 rpm 包：[root@ovs02 ~]# rpmbuild -bb --nocheck openvswitch-2.11.0/rhel/openvswitch-fedora.spec#安装 ovs：[root@ovs02 ~]# yum localinstall /root/rpmbuild/RPMS/x86_64/openvswitch-2.11.0-1.el7.x86_64.rpm#启动 ovs：[root@ovs02 ~]# systemctl start openvswitch.service[root@ovs02 ~]# systemctl enable openvswitch.serviceCreated symlink from /etc/systemd/system/multi-user.target.wants/openvswitch.service to /usr/lib/systemd/system/openvswitch.service.[root@ovs02 ~]# [root@ovs02 ~]# ovs-vsctl --versionovs-vsctl (Open vSwitch) 2.11.0
DB Schema 7.16.1language-bash复制代码后端使用 multus ovs
代码语言：javascript复制#创建网桥[root@localhost ~]# ovs-vsctl add-br br1#创建multus ovs-cni网络定义[root@localhost ~]# cat nad-ovs.yaml apiVersion: "k8s.cni.cncf.io/v1"kind: NetworkAttachmentDefinition
metadata:
name: ovs-vlan-100
spec:
config: '{
"cniVersion": "0.3.1",
"type": "ovs",
"bridge": "br1",
"vlan": 100
}'[root@localhost ~]# kubectl apply -f nad-ovs.yaml networkattachmentdefinition.k8s.cni.cncf.io/ovs-vlan-100 created[root@localhost ~]# kubectl get networkattachmentdefinition.k8s.cni.cncf.io NAME AGE
ovs-vlan-100 2m38s#vm yaml前端
interfaces:
- name: default
masquerade: {}
- name: ovs-net
bridge: {}#vm yaml后端 用ovs
networks:
- name: default
pod: {} # Stock pod network
- name: ovs-net
multus: # Secondary multus network
networkName: ovs-vlan-100language-bash复制代码后端 multus macvlan
代码语言：javascript复制#NetworkAttachmentDefinition apiVersion: "k8s.cni.cncf.io/v1"kind: NetworkAttachmentDefinition
metadata:
name: macvlan-test
spec:
config: '{
"type": "macvlan",
"master": "eth0",
"mode": "bridge",
"ipam": {
"type": "host-local",
"subnet": "10.250.250.0/24"
}
}'#vm yaml前端
interfaces:
- name: test1
bridge: {}#vm yaml后端macvlan
networks:
- name: test1
multus: # Multus network as default
default: true
networkName: macvlan-testlanguage-bash复制代码前端 macvtap绑定
代码语言：javascript复制[root@node1 ~]# cat macvtap-config.yamlkind: ConfigMap
apiVersion: v1
metadata:
name: macvtap-deviceplugin-config
data:
DP_MACVTAP_CONF: |
[
{
"name" : "dataplane", "master" : "ens33", "mode" : "bridge", "capacity" : 50
}, ][root@node1 ~]# cat macvtap-nad.yamlkind: NetworkAttachmentDefinition
apiVersion: k8s.cni.cncf.io/v1
metadata:
name: macvtapnetwork
annotations:
k8s.v1.cni.cncf.io/resourceName: macvtap.network.kubevirt.io/ens33
spec:
config: '{
"cniVersion": "0.3.1",
"name": "dataplane",
"type": "macvtap",
"mtu": 1500
}'# vm 前端 macvtap
interfaces:
- macvtap: {}
name: default# vm 后端
networks:
- multus:
networkName: macvtapnetwork
name: defaultlanguage-bash复制代码参考：macvlan实验
代码语言：javascript复制# 使用macvlan需要开启网卡的混杂模式[root@localhost ~]# yum install -y net-tools[root@localhost ~]# ifconfigens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.159.137 netmask 255.255.255.0 broadcast 192.168.159.255
inet6 fe80::c4e8:2243:ac4e:cd08 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:41:89:85 txqueuelen 1000 (Ethernet)
RX packets 37846 bytes 50602163 (48.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19172 bytes 1676426 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0[root@localhost ~]# ifconfig ens33 promisc[root@localhost ~]# ifconfigens33: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
inet 192.168.159.137 netmask 255.255.255.0 broadcast 192.168.159.255
inet6 fe80::c4e8:2243:ac4e:cd08 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:41:89:85 txqueuelen 1000 (Ethernet)
RX packets 37945 bytes 50609527 (48.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 19243 bytes 1683622 (1.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0# 查看内核是否开启macvlan模块，若没开启，需要开启[root@localhost ~]# lsmod | grep macvlan[root@localhost ~]# modprobe macvlan[root@localhost ~]# lsmod | grep macvlanmacvlan 19239 0 language-bash复制代码# 创建两个 macvlan 子接口[root@localhost ~]# ip link show1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:002: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff[root@localhost ~]# ip link add link ens33 dev mac1 type macvlan mode bridge[root@localhost ~]# ip link add link ens33 dev mac2 type macvlan mode bridge[root@localhost ~]# ip link show1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:002: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff3: mac1@ens33: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether a2:ae:ed:fa:34:be brd ff:ff:ff:ff:ff:ff4: mac2@ens33: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 4a:a3:d3:8c:3d:94 brd ff:ff:ff:ff:ff:ff# 创建两个 namespace[root@localhost ~]# ip netns list[root@localhost ~]# ip netns add ns1[root@localhost ~]# ip netns add ns2[root@localhost ~]# ip netns listns2
ns1# 将两个子接口分别挂到两个 namespace 中[root@localhost ~]# ip link set dev mac1 netns ns1[root@localhost ~]# ip link set dev mac2 netns ns2[root@localhost ~]# ip link show1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:002: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff[root@localhost ~]# ip netns exec ns1 dhclient mac1[root@localhost ~]# ip netns exec ns2 dhclient mac2dhclient(8478) is already running - exiting.
This version of ISC DHCP is based on the release available
on ftp.isc.org. Features have been added and other changes
have been made to the base software release in order to makeit work better with this distribution.
Please report for this software via the CentOS Bugs Database:
http://bugs.centos.org/
exiting.[root@localhost ~]# kill -9 8478[root@localhost ~]# ip netns exec ns2 dhclient mac2[root@localhost ~]# ip netns exec ns1 ip link set dev mac1 up[root@localhost ~]# ip netns exec ns2 ip link set dev mac2 up[root@localhost ~]# ip netns exec ns1 ip a1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:003: mac1@if2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether a2:ae:ed:fa:34:be brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.159.138/24 brd 192.168.159.255 scope global dynamic mac1
valid_lft 1714sec preferred_lft 1714sec
inet6 fe80::a0ae:edff:fefa:34be/64 scope link
valid_lft forever preferred_lft forever[root@localhost ~]# ip netns exec ns2 ip a1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:004: mac2@if2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
link/ether 4a:a3:d3:8c:3d:94 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.159.139/24 brd 192.168.159.255 scope global dynamic mac2
valid_lft 1745sec preferred_lft 1745sec
inet6 fe80::48a3:d3ff:fe8c:3d94/64 scope link
valid_lft forever preferred_lft forever[root@localhost ~]# ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.137/24 brd 192.168.159.255 scope global noprefixroute dynamic ens33
valid_lft 1510sec preferred_lft 1510sec
inet6 fe80::c4e8:2243:ac4e:cd08/64 scope link noprefixroute
valid_lft forever preferred_lft forever# 可以ping通网关[root@localhost ~]# ping 192.168.159.2PING 192.168.159.2 (192.168.159.2) 56(84) bytes of data.64 bytes from 192.168.159.2: icmp_seq=1 ttl=128 time=0.078 ms64 bytes from 192.168.159.2: icmp_seq=2 ttl=128 time=0.418 ms
^C
--- 192.168.159.2 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.078/0.248/0.418/0.170 ms[root@localhost ~]# ip netns exec ns1 ping 192.168.159.2PING 192.168.159.2 (192.168.159.2) 56(84) bytes of data.64 bytes from 192.168.159.2: icmp_seq=1 ttl=128 time=0.075 ms64 bytes from 192.168.159.2: icmp_seq=2 ttl=128 time=0.429 ms
^C
--- 192.168.159.2 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.075/0.252/0.429/0.177 ms[root@localhost ~]# ip netns exec ns2 ping 192.168.159.2PING 192.168.159.2 (192.168.159.2) 56(84) bytes of data.64 bytes from 192.168.159.2: icmp_seq=1 ttl=128 time=0.118 ms64 bytes from 192.168.159.2: icmp_seq=2 ttl=128 time=0.398 ms
^C
--- 192.168.159.2 ping statistics ---2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 0.118/0.258/0.398/0.140 ms[root@localhost ~]# curl www.backendcloud.cn<html><head><title>301 Moved Permanently</title></head><body bgcolor="white"><center><h1>301 Moved Permanently</h1></center><hr><center>nginx/1.6.3</center></body></html>[root@localhost ~]# ip netns exec ns1 curl www.backendcloud.cn<html><head><title>301 Moved Permanently</title></head><body bgcolor="white"><center><h1>301 Moved Permanently</h1></center><hr><center>nginx/1.6.3</center></body></html>[root@localhost ~]# ip netns exec ns2 curl www.backendcloud.cn<html><head><title>301 Moved Permanently</title></head><body bgcolor="white"><center><h1>301 Moved Permanently</h1></center><hr><center>nginx/1.6.3</center></body></html>language-bash复制代码虚拟出来的网卡和原网卡一样，都可以ping通网关，也都可以上外网。感觉就是原网卡的多个分身且每个分身都有不同的mac地址和ip地址。
外界要和ns1的网卡192.168.159.138和ns2的192.168.159.139通信，都会经过host网卡192.168.159.137，所以host网卡要开启混杂模式，不然就会丢掉138和139的ip包。
混杂模式是指一台机器的网卡能够接收所有经过它的数据流，而不论其目的地址是否是它。
MACVLAN 会根据收到包的目的 MAC 地址判断这个包需要交给哪个虚拟网卡。配合 network namespace 使用，可以构建这样的网络：
由于 macvlan 与 eth0 处于不同的 namespace，拥有不同的 network stack，这样使用可以不需要建立 bridge 在 virtual namespace 里面使用网络。
MACVTAP 是对 MACVLAN的改进，把 MACVLAN 与 TAP 设备的特点综合一下，使用 MACVLAN 的方式收发数据包，但是收到的包不交给 network stack 处理，而是生成一个 /dev/tapX 文件，交给这个文件：
由于 MACVLAN 是工作在 MAC 层的，所以 MACVTAP 也只能工作在 MAC 层，不会有 MACVTUN 这样的设备。TAP 设备与 TUN 设备工作方式完全相同，区别在于：
- TUN 设备的 /dev/tunX 文件收发的是 IP 层数据包，只能工作在 IP 层，无法与物理网卡做 bridge，但是可以通过三层交换（如 ip_forward）与物理网卡连通。
- TAP 设备的 /dev/tapX 文件收发的是 MAC 层数据包，拥有 MAC 层功能，可以与物理网卡做 bridge，支持 MAC 层广播。
参考：macvlan 用于 Docker 网络
相同 macvlan 网络之间的通信
图中的mac1不是上一个实验的绑定物理网卡的macvlan网口，而是docker的mac1网络，该网络可以有很多macvlan网口绑定在网络对应的物理网卡上，一个容器对应一个macvlan网口。所以一个物理网卡可以有多个macvlan网口，但只能有1个macvlan网络，这里是mac1。
若要一个物理网卡上绑定多个docker macvlan网络，也是可以实现的，就是下面一个实验，通过VLAN 技术将一个网口划分出多个子网口，这样就可以基于子网口来创建 macvlan 网络了
这次实验有四步：
首先使用 docker network create 分别在两台主机上创建两个 macvlan 网络
在 host1 运行容器 c1，并指定使用 macvlan 网络
在 host2 运行容器 c2，并指定使用 macvlan 网络
在host2 c2中ping host1 c1
代码语言：javascript复制[root@host1 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
f8744e0d3c5a bridge bridge local82e7f68e1904 host host local2089b08a3f7c none null local[root@host1 ~]# ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.137/24 brd 192.168.159.255 scope global noprefixroute dynamic ens33
valid_lft 1229sec preferred_lft 1229sec
inet6 fe80::c4e8:2243:ac4e:cd08/64 scope link noprefixroute
valid_lft forever preferred_lft forever3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:e5:a6:bc:90 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever[root@host1 ~]# docker network create -d macvlan --subnet=172.16.10.0/24 --gateway=172.16.10.1 -o parent=ens33 mac1eff87057bce8dc286d97e0a26e4ffcbc1b4ce66d6ea635417f7122426507a3f9[root@host1 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
f8744e0d3c5a bridge bridge local82e7f68e1904 host host localeff87057bce8 mac1 macvlan local2089b08a3f7c none null locallanguage-bash复制代码[root@host1 ~]# docker run -itd --name c1 --ip=172.16.10.2 --network mac1 busyboxUnable to find image 'busybox:latest' locally
latest: Pulling from library/busybox
19d511225f94: Pull complete
Digest: sha256:3614ca5eacf0a3a1bcc361c939202a974b4902b9334ff36eb29ffe9011aaad83
Status: Downloaded newer image for busybox:latest
8c8d2bb1c86019f4a923395e8f0c81ce3025379437bab2f1240dfb0567193856[root@host1 ~]# docker psCONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
8c8d2bb1c860 busybox "sh" 5 seconds ago Up 5 seconds c1[root@host1 ~]# docker exec -it 8c8d2bb1c860 sh/ # ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever4: eth0@if2: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue
link/ether 02:42:ac:10:0a:02 brd ff:ff:ff:ff:ff:ff
inet 172.16.10.2/24 brd 172.16.10.255 scope global eth0
valid_lft forever preferred_lft forever
/ # exit[root@host1 ~]#language-bash复制代码在host2中执行host1中相同的操作：
代码语言：javascript复制[root@host2 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
9ab8f059639f bridge bridge localbbf0967ea029 host host local8f4fd0997900 none null local[root@host2 ~]# docker network create -d macvlan --subnet=172.16.10.0/24 --gateway=172.16.10.1 -o parent=ens33 mac10b5992abca3398f23e3ae55c023d3139a6b3063c85f22d5fc1625fb3076fdb0d[root@host2 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
9ab8f059639f bridge bridge localbbf0967ea029 host host local0b5992abca33 mac1 macvlan local8f4fd0997900 none null local[root@host2 ~]# docker run -itd --name c2 --ip=172.16.10.3 --network mac1 busyboxUnable to find image 'busybox:latest' locally
latest: Pulling from library/busybox
19d511225f94: Pull complete
Digest: sha256:3614ca5eacf0a3a1bcc361c939202a974b4902b9334ff36eb29ffe9011aaad83
Status: Downloaded newer image for busybox:latest
882da145b5e133f34bca3087a85e2e37740ab15a7287460dddee166c022946a0[root@host2 ~]# docker psCONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
882da145b5e1 busybox "sh" 7 seconds ago Up 6 seconds c2[root@host2 ~]# docker exec c2 ping -c 2 172.16.10.2PING 172.16.10.2 (172.16.10.2): 56 data bytes64 bytes from 172.16.10.2: seq=0 ttl=64 time=1.440 ms64 bytes from 172.16.10.2: seq=1 ttl=64 time=0.365 ms
--- 172.16.10.2 ping statistics ---2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 0.365/0.902/1.440 mslanguage-bash复制代码注意：以上的实验都需要物理网卡 ens33 开启混杂模式，内核加载macvlan模块，不然会 ping 不通。
不同 macvlan 网络之间的通信
由于 macvlan 网络会独占物理网卡，也就是说一张物理网卡只能创建一个 macvlan 网络，如果我们想创建多个 macvlan 网络就得用多张网卡，但主机的物理网卡是有限的，怎么办呢？
好在 macvlan 网络也是支持 VLAN 子接口的，所以，我们可以通过 VLAN 技术将一个网口划分出多个子网口，这样就可以基于子网口来创建 macvlan 网络了，下面是具体的创建过程。
代码语言：javascript复制[root@host1 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
f8744e0d3c5a bridge bridge local82e7f68e1904 host host local2089b08a3f7c none null local[root@host1 ~]# ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.137/24 brd 192.168.159.255 scope global noprefixroute dynamic ens33
valid_lft 1402sec preferred_lft 1402sec
inet6 fe80::c4e8:2243:ac4e:cd08/64 scope link noprefixroute
valid_lft forever preferred_lft forever3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:e5:a6:bc:90 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever[root@host1 ~]# vconfig add ens33 100WARNING: Could not open /proc/net/vlan/config. Maybe you need to load the 8021q module, or maybe you are not using PROCFS??
Added VLAN with VID == 100 to IF -:ens33:-[root@host1 ~]# vconfig add ens33 200Added VLAN with VID == 200 to IF -:ens33:-[root@host1 ~]# vconfig set_flag ens33.100 1 1Set flag on device -:ens33.100:- Should be visible in /proc/net/vlan/ens33.100[root@host1 ~]# vconfig set_flag ens33.200 1 1Set flag on device -:ens33.200:- Should be visible in /proc/net/vlan/ens33.200[root@host1 ~]# ifconfig ens33.100 up[root@host1 ~]# ifconfig ens33.200 up[root@host1 ~]# ip a1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever2: ens33: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.159.137/24 brd 192.168.159.255 scope global noprefixroute dynamic ens33
valid_lft 1348sec preferred_lft 1348sec
inet6 fe80::c4e8:2243:ac4e:cd08/64 scope link noprefixroute
valid_lft forever preferred_lft forever3: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:e5:a6:bc:90 brd ff:ff:ff:ff:ff:ff
inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
valid_lft forever preferred_lft forever5: ens33.100@ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20c:29ff:fe41:8985/64 scope link
valid_lft forever preferred_lft forever6: ens33.200@ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:0c:29:41:89:85 brd ff:ff:ff:ff:ff:ff
inet6 fe80::20c:29ff:fe41:8985/64 scope link
valid_lft forever preferred_lft forever[root@host1 ~]# docker network create -d macvlan --subnet=172.16.10.0/24 --gateway=172.16.10.1 -o parent=ens33.100 mac10a7847f72406c1e5d625eea200d0afcb57b25c2f0bf5be3a6b54892ccfe8ad44d[root@host1 ~]# docker network create -d macvlan --subnet=172.16.20.0/24 --gateway=172.16.20.1 -o parent=ens33.200 mac20a8cea5034562ab7ea2c5e817864d113a296981874c7fdbd7b52c860120bb71ac[root@host1 ~]# docker network lsNETWORK ID NAME DRIVER SCOPE
f8744e0d3c5a bridge bridge local82e7f68e1904 host host locala7847f72406c mac10 macvlan locala8cea5034562 mac20 macvlan local2089b08a3f7c none null local[root@host1 ~]#language-bash复制代码node2上做相同的上面的操作后，分别在 host1 和 host2 上运行容器，并指定不同的 macvlan 网络。
代码语言：javascript复制# 分别在 host1 和 host2 上运行容器，并指定不同的 macvlan 网络。[root@host1 ~]# docker run -itd --name d1 --ip=172.16.10.10 --network mac10 busyboxdc7b119997daae7b80401e829af15df8b9b700d11071b89f0c953f3bfda26e33[root@host1 ~]# docker run -itd --name d2 --ip=172.16.20.10 --network mac20 busybox0b0dec9d4888b7a6b4b6163a26fcc991c63d45d218a65a28042feea351dd1306[root@host2 ~]# docker run -itd --name d3 --ip=172.16.10.11 --network mac10 busyboxda78656826054f74910fa1ea33450d44019f5d1204b4ba90f902ea87e2e7a80b[root@host2 ~]# docker run -itd --name d4 --ip=172.16.20.11 --network mac20 busybox5ae905c9bcc0bbfc33ea699a16cefb26aaf67b471e09e9829471d8ecba5c0204language-bash复制代码mac10的两个容器可以互相ping通，mac20的两个容器互通，不同macvlan网络的容器不能通。不同 macvlan 网络处于不同的网络，而且通过 VLAN 隔离，自然 ping 不了。但这也只是在二层上通不了，重新找一台主机 host3，通过打开 ip_forward 把它改造成一台路由器用来打通两个 macvlan 网络，大概的图示如下所示：
若用vmware workstation pro做的实验，可能不同wmware虚拟机间的网络支持不了vlan，需要结合hyper-v virtmgmt.msc
首先对 host3 执行 sysctl -w net.ipv4.ip_forward=1 打开路由开关。
然后创建两个 VLAN 子接口，一个作为 macvlan 网络 mac10 的网关，一个作为 mac20 的网关
代码语言：javascript复制[root@localhost ~]# vconfig add ens33 100[root@localhost ~]# vconfig add ens33 200[root@localhost ~]# vconfig set_flag ens33.100 1 1[root@localhost ~]# vconfig set_flag ens33.200 1 1
# 对 vlan 子接口配置网关 IP 并启用[root@localhost ~]# ifconfig ens33.100 172.16.10.1 netmask 255.255.255.0 up[root@localhost ~]# ifconfig ens33.200 172.16.20.1 netmask 255.255.255.0 uplanguage-bash复制代码这样之后再从 4个容器间就可以互相 ping 通了。
代码语言：javascript复制可能有些系统做了安全限制，可能 ping 不通，这时候可以添加以下 iptables 规则，目的是让系统能够转发不通 VLAN 的数据包。
iptables -t nat -A POSTROUTING -o ens33.100 -j MASQUERADE
iptables -t nat -A POSTROUTING -ens33.200 -j MASQUERADE
iptables -A FORWARD -i ens33.100 -o ens33.200 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i ens33.200 -o ens33.100 -m state --state RELATED,ESTABLISHED -j ACCEPT
iptables -A FORWARD -i ens33.100 -o ens33.200 -j ACCEPT
iptables -A FORWARD -i ens33.200 -o ens33.100 -j ACCEPTlanguage-bash复制代码
