要使用 ovs-dpdk，需要在node上构建 DPDK 并使用相应的 DPDK flag重新构建 ovs。 OVS-DPDK需要从源码编译，因为高度依赖内核等所在机器的环境，并需要配置很多参数以达到高性能。这意味着很难提供一个ovs-dpdk docker镜像来满足所有情况。 OVS-DPDK需要大页内存作为资源。 由于 DPDK 会剥夺系统对 nic 的控制权，我们需要一个 ovs-dpdk 专用的 nic 来传输容器网络，另一个 nic 用于普通主机网络。 普通Pod的ovs网络是在 pod 和 ovs 端口之间放置了一个 veth 对。 veth 的一端移动到容器网络命名空间。不能用 OVS-DPDK 做到这一点。当我们请求一个新的 DPDK 端口时，我们最终会在 /var/run/openvswitch/ 这样的目录中得到一个类似 vhost-user 套接字文件的东西。它不能在命名空间之间移动，它必须被挂载到 pod 中就像一个普通的文件(由 Userspace-CNI 提供的功能)。所以不能使用 OVS-DPDK 作为默认网络。Pod对K8S API不可达，K8S不能对pod进行健康检查。因此，需要依赖 Multus 来连接多个网络。Kernel-OVS 仍然是默认网络。此外，Multus 允许为Pod提供 OVS-DPDK 网络。这是同一个 OVS 实例，但是 DPDK port位于另一个支持 DPDK 的bridge上。 ovs-dpdk创建br和port， ovs 集成网桥类型更改为 netdev ，端口类型更改为 dpdkvhostuser 并设置其他 ovs-dpdk 参数。
准备工作
代码语言：javascript复制[root@backendcloud-fedora27 ~]# dnf groupinstall "Development Tools"
[root@backendcloud-fedora27 ~]# dnf groupinstall "Virtualization"
[root@backendcloud-fedora27 ~]# dnf install qemu
[root@backendcloud-fedora27 ~]# dnf install automake tunctl kernel-tools pciutils hwloc numactl
[root@backendcloud-fedora27 ~]# dnf install libpcap-devel
[root@backendcloud-fedora27 ~]# dnf install numactl-devel
[root@backendcloud-fedora27 ~]# dnf install libtool编译DPDK
代码语言：javascript复制[root@backendcloud-fedora27 ~]# tar xf dpdk-17.08.1.tar.xz
[root@backendcloud-fedora27 ~]# ls
anaconda-ks.cfg dpdk-17.08.1.tar.xz dpdk-stable-17.08.1
[root@backendcloud-fedora27 ~]# cd dpdk-
-bash: cd: dpdk-: No such file or directory
[root@backendcloud-fedora27 ~]# cd dpdk-stable-17.08.1/
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# export DPDK_DIR=`pwd`/build
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# make config T=x86_64-native-linuxapp-gcc
Configuration done using x86_64-native-linuxapp-gcc
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# sed -ri 's,(PMD_PCAP=).*,1y,' build/.config
[root@backendcloud-fedora27 dpdk-stable-17.08.1]# makemake 报错：
代码语言：javascript复制/usr/src/kernels/4.18.19-100.fc27.x86_64/Makefile:945: *** "Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel". Stop.language-bash复制代码安装 elfutils-libelf-devel 解决：
代码语言：javascript复制[root@backendcloud-fedora27 dpdk-stable-17.08.1]# yum install -y elfutils-libelf-devel编译DPDK可以参考 编译DPDK
编译OvS-DPDK
代码语言：javascript复制[root@backendcloud-fedora27 ~]# wget http://openvswitch.org/releases/openvswitch-2.8.1.tar.gz
[root@backendcloud-fedora27 ~]# tar -xzvf openvswitch-2.8.1.tar.gz
[root@backendcloud-fedora27 ~]# cd openvswitch-2.8.1/
[root@backendcloud-fedora27 openvswitch-2.8.1]# export OVS_DIR=`pwd`
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo ./boot.sh
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo ./configure --with-dpdk="$DPDK_DIR/" CFLAGS="-g -Ofast"
[root@backendcloud-fedora27 openvswitch-2.8.1]# sudo make 'CFLAGS=-g -Ofast -march=native' -j10Create OvS DB and Start OvS DB-Server
代码语言：javascript复制[root@backendcloud-fedora27 openvswitch-2.8.1]# pkill -9 ovs
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -rf /usr/local/var/run/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -rf /usr/local/etc/openvswitch/
[root@backendcloud-fedora27 openvswitch-2.8.1]# rm -f /usr/local/etc/openvswitch/conf.db
[root@backendcloud-fedora27 openvswitch-2.8.1]# mkdir -p /usr/local/etc/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# mkdir -p /usr/local/var/run/openvswitch
[root@backendcloud-fedora27 openvswitch-2.8.1]# cd $OVS_DIR
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-tool create /usr/local/etc/openvswitch/conf.db ./vswitchd/vswitch.ovsschema
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,Open_vSwitch,manager_options --pidfile --detach
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait initConfigure Fedora27 for OvS-DPDK
代码语言：javascript复制[root@backendcloud-fedora27 openvswitch-2.8.1]# vim /etc/default/grub
...
GRUB_CMDLINE_LINUX_DEFAULT="default_hugepagesz=1G hugepagesz=1G hugepages=4 hugepagesz=2M hugepages=512 iommu=pt intel_iommu=on"
[root@backendcloud-fedora27 openvswitch-2.8.1]# grub2-mkconfig -o /boot/grub2/grub.cfg
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.18.19-100.fc27.x86_64
Found initrd image: /boot/initramfs-4.18.19-100.fc27.x86_64.img
Found linux image: /boot/vmlinuz-0-rescue-98bddbf29a4f40009b8390e2c27a80ac
Found initrd image: /boot/initramfs-0-rescue-98bddbf29a4f40009b8390e2c27a80ac.img
done
[root@backendcloud-fedora27 openvswitch-2.8.1]# reboot代码语言：javascript复制可以设置cpu隔离： GRUB_CMDLINE_LINUX_DEFAULT=”default_hugepagesz=1G hugepagesz=1G hugepages=16 hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=1-27,29-55”
[root@backendcloud-fedora27 ~]# mkdir -p /mnt/huge
[root@backendcloud-fedora27 ~]# mkdir -p /mnt/huge_2mb
[root@backendcloud-fedora27 ~]# mount -t hugetlbfs hugetlbfs /mnt/huge
[root@backendcloud-fedora27 ~]# mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB
[root@backendcloud-fedora27 ~]# cat /proc/meminfo
MemTotal: 17650724 kB
MemFree: 11744728 kB
MemAvailable: 11867184 kB
...
HugePages_Total: 4
HugePages_Free: 4
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 1048576 kB
Hugetlb: 5242880 kB
DirectMap4k: 124736 kB
DirectMap2M: 5273600 kB
DirectMap1G: 13631488 kB
[root@backendcloud-fedora27 ~]# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-4.18.19-100.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root rhgb quiet default_hugepagesz=1G hugepagesz=1G hugepages=4 hugepagesz=2M hugepages=512 iommu=pt intel_iommu=on配置OVS-DPDK
代码语言：javascript复制[root@backendcloud-fedora27 ~]# modprobe vfio-pci
[root@backendcloud-fedora27 ~]# modprobe openvswitch
[root@backendcloud-fedora27 ~]# cd openvswitch-2.8.1
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./ovsdb/ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock --remote=db:Open_vSwitch,Open_vSwitch,manager_options --pidfile --detach
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./vswitchd/ovs-vswitchd unix:/usr/local/var/run/openvswitch/db.sock --pidfile --detach
2022-09-22T06:09:08Z|00001|ovs_numa|INFO|Discovered 4 CPU cores on NUMA node 0
2022-09-22T06:09:08Z|00002|ovs_numa|INFO|Discovered 1 NUMA nodes and 4 CPU cores
2022-09-22T06:09:08Z|00003|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connecting...
2022-09-22T06:09:08Z|00004|reconnect|INFO|unix:/usr/local/var/run/openvswitch/db.sock: connected
2022-09-22T06:09:08Z|00005|dpdk|INFO|DPDK Disabled - Use other_config:dpdk-init to enable
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true配置隔离cpu，memory提高DPDK性能，非必须。
代码语言：javascript复制[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=0x10000001
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-lcore-mask=0xffffffeffffffe
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,1024"language-bash复制代码Creating an OvS-DPDK Bridge and Ports
代码语言：javascript复制[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl show
52de1671-20cc-438c-be6a-d41e7923100b
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-port br0 vhost-user1 -- set Interface vhost-user1 type=dpdkvhostuser
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl add-port br0 vhost-user2 -- set Interface vhost-user2 type=dpdkvhostuser
[root@backendcloud-fedora27 openvswitch-2.8.1]# ./utilities/ovs-vsctl show
52de1671-20cc-438c-be6a-d41e7923100b
Bridge "br0"
Port "vhost-user1"
Interface "vhost-user1"
type: dpdkvhostuser
Port "br0"
Interface "br0"
type: internal
Port "vhost-user2"
Interface "vhost-user2"
type: dpdkvhostuserBinding Nic Device to DPDK
代码语言：javascript复制[root@backendcloud-fedora27 openvswitch-2.8.1]# modprobe vfio-pci
[root@backendcloud-fedora27 openvswitch-2.8.1]# cp ~/dpdk-stable-17.08.1/usertools/dpdk-devbind.py /usr/bin/
[root@backendcloud-fedora27 openvswitch-2.8.1]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:0c:29:7a:c2:a0 brd ff:ff:ff:ff:ff:ff
inet 192.168.126.143/24 brd 192.168.126.255 scope global dynamic ens33
valid_lft 1442sec preferred_lft 1442sec
inet6 fe80::7e7a:3d91:e5b0:4a63/64 scope link
valid_lft forever preferred_lft forever
3: ens34: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:0c:29:7a:c2:aa brd ff:ff:ff:ff:ff:ff
inet 192.168.126.144/24 brd 192.168.126.255 scope global dynamic ens34
valid_lft 1398sec preferred_lft 1398sec
inet6 fe80::49fe:5d8c:8b86:95d8/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:30:d1:c3 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 1000
link/ether 52:54:00:30:d1:c3 brd ff:ff:ff:ff:ff:ff
6: ovs-netdev: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 22:0e:6b:c1:4c:91 brd ff:ff:ff:ff:ff:ff
7: br0: <BROADCAST,PROMISC> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 0e:3b:21:02:03:47 brd ff:ff:ff:ff:ff:ff
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
<none>
Network devices using kernel driver
===================================
0000:02:01.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens33 drv=e1000 unused=vfio-pci *Active*
0000:02:02.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens34 drv=e1000 unused=vfio-pci *Active*
...
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --bind=vfio-pci ens34
Routing table indicates that interface 0000:02:02.0 is active. Not modifying
[root@backendcloud-fedora27 openvswitch-2.8.1]# yum install -y net-tools
[root@backendcloud-fedora27 openvswitch-2.8.1]# ifconfig ens34 down
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --bind=vfio-pci ens34
[root@backendcloud-fedora27 openvswitch-2.8.1]# dpdk-devbind.py --status
Network devices using DPDK-compatible driver
============================================
0000:02:02.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' drv=vfio-pci unused=
Network devices using kernel driver
===================================
0000:02:01.0 '82545EM Gigabit Ethernet Controller (Copper) 100f' if=ens33 drv=e1000 unused=vfio-pci *Active*
...Using DPDK vhost-user Ports with VMs
去官网下载镜像并修改root密码：
代码语言：javascript复制[root@backendcloud-fedora27 ~]# virt-customize -a centos7vm1.qcow2 --root-password password:666666
-bash: virt-customize: command not found
[root@backendcloud-fedora27 ~]# dnf install -y libguestfs-tools
[root@backendcloud-centos9 ~]# virt-customize -a centos7vm1.qcow2 --root-password password:666666
[ 0.0] Examining the guest ...
[ 6.8] Setting a random seed
[ 6.8] Setting passwords
[ 8.3] SELinux relabelling
[ 12.9] Finishing off
[root@backendcloud-centos9 ~]# virt-customize -a centos7vm2.qcow2 --root-password password:666666启动两个dpdk vm：
代码语言：javascript复制qemu-system-x86_64 -m 1024 -smp 4 -cpu host,pmu=off -hda /root/centos7vm1.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic
-chardev socket,id=char1,path=/usr/local/var/run/openvswitch/vhost-user1
-netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce
-device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1
-object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on
-numa node,memdev=mem -mem-prealloc
qemu-system-x86_64 -m 1024 -smp 4 -cpu host,pmu=off -hda /root/centos7vm2.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic
-chardev socket,id=char2,path=/usr/local/var/run/openvswitch/vhost-user2
-netdev type=vhost-user,id=mynet2,chardev=char2,vhostforce
-device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2
-object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on
-numa node,memdev=mem -mem-prealloc若上面的操作是在vmware上操作，需要加上上面额外的参数pmu=off，为了规避vmware的bug。若不加会报下面的错误：
代码语言：javascript复制[root@backendcloud-fedora27 ~]# qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda /root/centos7vm1.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic
> -chardev socket,id=char1,path=/usr/local/var/run/openvswitch/vhost-user1
> -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce
> -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1
> -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on
> -numa node,memdev=mem -mem-prealloc
qemu-system-x86_64: error: failed to set MSR 0x38d to 0x0
qemu-system-x86_64: /builddir/build/BUILD/qemu-2.10.2/target/i386/kvm.c:1806: kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
Aborted (core dumped)安装iperf3，并测试：
代码语言：javascript复制[root@localhost ~]# iperf3 -s
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------
Accepted connection from 192.168.0.2, port 48462
[ 5] local 192.168.0.1 port 5201 connected to 192.168.0.2 port 48464
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-1.00 sec 828 MBytes 6.95 Gbits/sec
[ 5] 1.00-2.00 sec 775 MBytes 6.51 Gbits/sec
[ 5] 2.00-3.00 sec 852 MBytes 7.15 Gbits/sec
[ 5] 3.00-4.00 sec 1.03 GBytes 8.85 Gbits/sec
[ 5] 4.00-5.00 sec 928 MBytes 7.79 Gbits/sec
[ 5] 5.00-6.00 sec 905 MBytes 7.59 Gbits/sec
[ 5] 6.00-7.00 sec 824 MBytes 6.91 Gbits/sec
[ 5] 7.00-8.00 sec 962 MBytes 8.07 Gbits/sec
[ 5] 8.00-9.00 sec 987 MBytes 8.28 Gbits/sec
[ 5] 9.00-10.00 sec 856 MBytes 7.19 Gbits/sec
[ 5] 10.00-10.04 sec 35.2 MBytes 7.97 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 5] 0.00-10.04 sec 0.00 Bytes 0.00 bits/sec sender
[ 5] 0.00-10.04 sec 8.80 GBytes 7.53 Gbits/sec receiver
-----------------------------------------------------------
Server listening on 5201
-----------------------------------------------------------[root@localhost ~]# iperf3 -c 192.168.0.1
Connecting to host 192.168.0.1, port 5201
[ 4] local 192.168.0.2 port 48464 connected to 192.168.0.1 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 861 MBytes 7.22 Gbits/sec 1087 177 KBytes
[ 4] 1.00-2.00 sec 745 MBytes 6.26 Gbits/sec 566 182 KBytes
[ 4] 2.00-3.00 sec 908 MBytes 7.61 Gbits/sec 755 184 KBytes
[ 4] 3.00-4.00 sec 1.01 GBytes 8.66 Gbits/sec 824 212 KBytes
[ 4] 4.00-5.00 sec 935 MBytes 7.85 Gbits/sec 589 165 KBytes
[ 4] 5.00-6.00 sec 875 MBytes 7.34 Gbits/sec 514 194 KBytes
[ 4] 6.00-7.00 sec 850 MBytes 7.13 Gbits/sec 718 188 KBytes
[ 4] 7.00-8.00 sec 983 MBytes 8.25 Gbits/sec 949 158 KBytes
[ 4] 8.00-9.00 sec 930 MBytes 7.80 Gbits/sec 649 180 KBytes
[ 4] 9.00-10.00 sec 892 MBytes 7.48 Gbits/sec 668 147 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 8.80 GBytes 7.56 Gbits/sec 7319 sender
[ 4] 0.00-10.00 sec 8.80 GBytes 7.56 Gbits/sec receiver
iperf Done.对比非OVS-DPDK虚拟机
代码语言：javascript复制[root@backendcloud-fedora27 ~]# yum -y install wget openssl-devel gcc make python-devel openssl-devel kernel-devel graphviz kernel-debug-devel autoconf automake rpm-build redhat-rpm-config libtool python-twisted-core python-zope-interface PyQt4 desktop-file-utils libcap-ng-devel groff checkpolicy selinux-policy-devel
[root@backendcloud-fedora27 ~]# adduser ovs
[root@backendcloud-fedora27 ~]# su - ovs
[ovs@backendcloud-fedora27 ~]$ mkdir -p ~/rpmbuild/SOURCES
[ovs@backendcloud-fedora27 ~]$ cd ~/rpmbuild/SOURCES
[ovs@backendcloud-fedora27 ~]$ wget http://openvswitch.org/releases/openvswitch-2.5.10.tar.gz
[ovs@backendcloud-fedora27 ~]$ tar -zxvf openvswitch-2.5.10.tar.gz
[ovs@backendcloud-fedora27 ~]$ rpmbuild -bb --nocheck openvswitch-2.5.10/rhel/openvswitch-fedora.spec
[ovs@backendcloud-fedora27 ~]$ exit
[root@backendcloud-fedora27 ~]# yum localinstall yum localinstall /home/ovs/rpmbuild/RPMS/x86_64/openvswitch-2.5.10-1.fc27.x86_64.rpm -y
[root@backendcloud-fedora27 ~]# ovs-vsctl --version
ovs-vsctl (Open vSwitch) 2.5.10
Compiled Sep 22 2022 16:43:31
DB Schema 7.12.1
[root@backendcloud-fedora27 ~]# systemctl start openvswitch.service
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
[root@backendcloud-fedora27 ~]# ovs-vsctl add-br br1
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
Bridge "br1"
Port "br1"
Interface "br1"
type: internal
ovs_version: "2.5.10"
[root@backendcloud-fedora27 tmp]# cat test.xml
<network>
<name>test</name>
<forward mode="bridge"/>
<bridge name="br1"/>
<virtualport type="openvswitch"/>
</network>
[root@backendcloud-fedora27 tmp]# virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default active yes yes
[root@backendcloud-fedora27 tmp]# virsh net-define test.xml
Network test defined from test.xml
[root@backendcloud-fedora27 tmp]# virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default active yes yes
test inactive no yes
[root@backendcloud-fedora27 tmp]# virsh net-start test
Network test started
[root@backendcloud-fedora27 tmp]# virsh net-list --all
Name State Autostart Persistent
----------------------------------------------------------
default active yes yes
test active no yes
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
Bridge "br1"
Port "br1"
Interface "br1"
type: internal
ovs_version: "2.5.10"
[root@backendcloud-fedora27 tmp]# virt-install --virt-type kvm --name test-vm1 --ram 1024 --boot hd --disk path=c1.qcow2 --network network=test,mac=52:54:00:aa:69:dd --noautoconsole --keymap=en-us
WARNING No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results.
Starting install...
Domain creation completed.
[root@backendcloud-fedora27 tmp]# virt-install --virt-type kvm --name test-vm2 --ram 1024 --boot hd --disk path=c2.qcow2 --network network=test,mac=52:54:00:aa:69:de --noautoconsole --keymap=en-us
WARNING No operating system detected, VM performance may suffer. Specify an OS with --os-variant for optimal results.
Starting install...
Domain creation completed.
# 不加 "--keymap=en-us" kvm虚拟机会出现键盘乱码
[root@backendcloud-fedora27 tmp]# ovs-vsctl show
0425b4a1-cfb0-4cbb-94a8-68bd581ce48e
Bridge "br1"
Port "vnet0"
Interface "vnet0"
Port "br1"
Interface "br1"
type: internal
Port "vnet1"
Interface "vnet1"
ovs_version: "2.5.10"
