master端： #yum install salt-master -y salt主控端安装 # vim /etc/salt/master salt主配置文件修改 interface: 服务监听IP auto_accept: True（可选，key通过‘salt-key -a keyname’命令手动进行认证） 注意：keyname 就是客户端中设置的id标识(可以查看salt-minion端的配置)
#salt-master -l debug debug模式，查看salt都进行哪些操作 #systemctl restart salt-master 重启salt服务 #systemctl status salt-master 查看状态 #netstat -antlp | grep 4505 确保消息发布端口正常 #netstat -antlp | grep 4506 确保客户端与服务端通信端口正常 # salt-key 查看认证相关信息 # salt-key -a wy-pe2 手动添加认证key(给wy-pe2主机添加认证) #iptables -F 关闭防火墙以免影响认证 #salt-key -a wy-pe2 #salt-key -L 查看认证信息(会有显示已经认证和未认证的相关信息) [root@wy-pe1 ~]# salt-key -L Accepted Keys: wy-pe2 已经允许的key(表示wy-pe2已经允许认证了) Unaccepted Keys: Rejected Keys:
#cd /etc/salt/pki/master/minions 在master中的minions目录中生成认证的key #setenforce 0 暂时关闭selinux #/etc/init.d/salt-master restart
执行远程命令(使用salt内建的模块): #salt ‘wy-pe2′ test.ping 测试master和minion进行通信(在master端进行ping响应测试) [root@wy-pe1 ~]# salt ‘wy-pe2′ test.ping 如果能ping通，则为True wy-pe2: True
#lsof -i:4505 查看到minion端都和4505保持建立 [root@wy-pe1 ~]# lsof -i:4505 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME salt-mast 8568 root 12u IPv4 63217 0t0 TCP *:4505 (LISTEN) salt-mast 8568 root 14u IPv4 65101 0t0 TCP wy-pe1:4505->wy-pe2:51237 (ESTABLISHED)(表示建立连接了) 注意:如果认证那块没做好，就会影响相关的链接
minion端：
salt-call -h
Usage: salt-call [options] <function> [arguments] Options:
--version： 查看saltstack程序的版本号。
--versions-report： 查看saltstack程序以及依赖包的版本号。
-h, --help：查看帮助信息。
--saltfile=SALTFILE： 指定配置文件。
-c CONFIG_DIR, --config-dir=CONFIG_DIR：指定配置文件目录（默认是/etc/salt/）
--hard-crash： 捕捉到original异常不退出（默认关闭）。
-g, --grains： 返回的信息生成grains。
-m MODULE_DIRS, --module-dirs=MODULE_DIRS： 指定自定义模块目录。
-d, --doc, --documentation： 查看指定模块或者所有模块文档。
--master=MASTER： 指定saltstack master。如果省略此选项，将使用minion config中的主选项。如果设置了多主机，则首先列出的主机将被使用。
--return=RETURNER：设置salt-call将返回数据传递给一个或多个returner接口。
--local：在本地运行salt-call，默认也是在本地运行。
--file-root=FILE_ROOT：指定fire基础根目录。
--pillar-root=PILLAR_ROOT： 指定pillar基础根目录。
--retcode-passthrough：显示salt-call命令返回状态。
--metadata ：打印执行元数据以及返回。 这将打印输出器数据，返回码等。
--id=ID：指定一个minion ID.
--skip-grains：不加载grains信息。
--refresh-grains-cache：强制刷新grains信息。
-t AUTH_TIMEOUT, --timeout=AUTH_TIMEOUT：更改运行命令的超时时间，默认 60秒。
salt的简单使用： salt可以直接让minion执行模块命令，也可以直接执行shell命令 1.salt -C ‘wy-pe1 and wy-pe2 or wy-peN’ test.ping -C表示多参数(表示在测试多台主机的存活状态) # salt ‘*’ disk.usage 查看磁盘使用情况(使用内建模块查看所有minion端的磁盘使用情况) #salt ‘*’ cmd.run ‘df -h’ 使用cmd.run直接调用远程shell命令(功能同上) # salt ‘*’ cmd.run “cat /root/lall” 查看客户端主机的/root/lall文件
2.nodegroup对minion进行分组： nodegroups: group1: ‘L@foo.domain.com,bar.domain.com,baz.domain.com or bl*.domain.com’ group2: ‘G@os :Debian and foo.domain.com’
group3:’wy-pe2′ 进行分组测试： # salt -N group3 test.ping wy-pe2: True
3.grains对minion基本信息的管理：
salt ‘wy-pe2′ grins.ls 查看grains分类 salt ‘wy-pe2′ grins.items 查看minnon基本信息(硬件参数)
4.pillar对敏感信息的管理，只有匹配到的节点才能获取和使用 默认pillar数据定义文件存储路径:/srv/pillar
状态管理： 1.salt基于minion进行状态的管理(state) 类似于pupet的pp文件功能，salt的state文件扩展文件名为.sls,采用的是和puppet一样的设计思路。即以master 端的文件状态来确定minion端的一些状态信息设置。(安装的软件包，服务的运行状态以及需要同步的文件配置) 注意：salt默认的根目录在/srv/salt中，如果没有需要进行建立。
top.sls：这个文件类似于puppet的site.pp文件，作为“最高同步”操作的入口文件，执行“最高同步”操作时，将从此sls文件中获取状态对minion进行同步
示例：(注意，salt文件完全采用ymal格式，对代码的缩进有着严格的要求) #vim /srv/salt/servers_package.sls httpd: 项目名 pkg: 类型 – installed 动作(表示安装httpd包) service: – running – enable:True vim-enhanced: pkg: – installed tomcat环境 openjdk-7-jdk: pkg: – installed tomcat7: pkg: – installed – require: – pkg: openjdk-7-jdk
# salt ‘wy-pe2′ state.sls servers_package 按照sls文件中的配置对wy-pe2进行服务配置
管理配置文件 httpd: pkg: – installed file.managed: 文件管理(文件同步操作) – name: /etc/httpd/conf/httpd.conf – source: salt://httpd/httpd.conf
# salt ‘wy-pe2′ state.highstate 应用修改(给minion永久添加状态)
3.使用salt schedule对minion进行实时更新，让minion自觉的保持某个状态
4.实时管理 有时候我们需要临时的查看某个机器上的某个文件，或者执行某个命令
cmd.run方式：(salt ‘targeting’ cmd.run ‘cmd’)用来远程执行shell命令 # salt ‘wy-pe2′ cmd.run ‘ifconfig eth0′ 查看某台主机的网络接口
cmd.script方式：可以向远程主机执行脚本 #salt ‘*’ cmd.script salt://useradd.sh 向minion主机上执行useradd.sh脚本(salt://是salt的默认发布目录，即/srv/salt)
pkg.install方式：制定主机安装软件 #salt ‘wy-pe2′ pkg.install vsftpd 指定主机安装软件
# salt ‘*’ network.interfaces 查看远程主机接口
# salt-cp ‘wy-pe2′ salt-cmd /home/xxb2 复制文件到指定的系统上(当前目录的salt-cmd) salt是主命令，一般用来执行命令模块。 salt-cp用来复制文件到指定的系统上去 salt-key用来和minion之间进行身份验证 salt-master为服务端的主守护进程用于控制minion salt-run为前端命令执行
module方式：(模块查看方式#salt ‘*’ sys.doc) #salt ‘*’ disk.usage 查看磁盘使用情况 # salt ‘*’ grains.item os/osrelease/oscodename # salt ‘*’ user(group).info xxb2 # salt ‘*’ ip.get_interface eth0 #salt ‘*’ lvm.vgdisplay
salt相关管理命令： salt-run manage.up 查看存活的minion salt-run manage.down 查看死掉的minion salt-run manage.down removekeys=True 查看down掉的minion，并将其删除 salt-run manage.status 查看minion的相关状态 salt-run manage.versions 查看slat的所有master和minion的版本信息
附录：
salt详细使用命令
salt ‘*’ acl.delfacl user myuser /tmp/house/kitchen
salt ‘*’ acl.delfacl default:group mygroup /tmp/house/kitchen
salt ‘*’ acl.delfacl d:u myuser /tmp/house/kitchen
salt ‘*’ acl.delfacl g myuser /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.getfacl /tmp/house/kitchen
salt ‘*’ acl.getfacl /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.addfacl user myuser rwx /tmp/house/kitchen
salt ‘*’ acl.addfacl default:group mygroup rx /tmp/house/kitchen
salt ‘*’ acl.addfacl d:u myuser 7 /tmp/house/kitchen
salt ‘*’ acl.addfacl g mygroup 0 /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ acl.version
salt ‘*’ acl.wipefacls /tmp/house/kitchen
salt ‘*’ acl.wipefacls /tmp/house/kitchen /tmp/house/livingroom
salt ‘*’ aliases.get_target alias
salt ‘*’ aliases.has_target alias target
salt ‘*’ aliases.list_aliases
salt ‘*’ aliases.rm_alias alias
salt ‘*’ aliases.set_target alias target
salt ‘*’ alternatives.auto name
salt ‘*’ alternatives.check_installed name path
salt ‘*’ alternatives.display editor
salt ‘*’ alternatives.install editor /usr/bin/editor /usr/bin/emacs23 50
salt ‘*’ alternatives.remove name path
salt ‘*’ alternatives.set name path
salt ‘*’ alternatives.show_current editor
salt ‘*’ apache.config /etc/httpd/conf.d/ports.conf config=”[{‘Listen': ’22’}]”
salt ‘*’ apache.directives
salt ‘*’ apache.fullversion
salt ‘*’ apache.modules
salt ‘*’ apache.server_status
salt ‘*’ apache.server_status other-profile
salt ‘*’ apache.servermods
salt ‘*’ apache.signal restart
salt ‘*’ apache.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ apache.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ apache.userdel /etc/httpd/htpasswd larry
salt ‘*’ apache.version
salt ‘*’ archive.gunzip template=jinja /tmp/{{grains.id}}.txt.gz
salt ‘*’ archive.gunzip /tmp/sourcefile.txt.gz
salt ‘*’ archive.gzip template=jinja /tmp/{{grains.id}}.txt
salt ‘*’ archive.gzip /tmp/sourcefile.txt
salt ‘*’ archive.rar template=jinja /tmp/rarfile.rar ‘/tmp/sourcefile1,/tmp/{{grains.id}}.txt’
salt ‘*’ archive.rar /tmp/rarfile.rar /tmp/sourcefile1,/tmp/sourcefile2
salt ‘*’ archive.tar cjvf /tmp/salt.tar.bz2 {{grains.saltpath}} template=jinja
salt ‘*’ archive.tar cjvf /tmp/tarfile.tar.bz2 /tmp/file_1,/tmp/file_2
salt ‘*’ archive.tar xf foo.tar dest=/target/directory
salt ‘*’ archive.unrar template=jinja /tmp/rarfile.rar /tmp/{{grains.id}}/ excludes=file_1,file_2
salt ‘*’ archive.unrar /tmp/rarfile.rar /home/strongbad/ excludes=file_1,file_2
salt ‘*’ archive.unzip template=jinja /tmp/zipfile.zip /tmp/{{grains.id}}/ excludes=file_1,file_2
salt ‘*’ archive.unzip /tmp/zipfile.zip /home/strongbad/ excludes=file_1,file_2
salt ‘*’ archive.zip template=jinja /tmp/zipfile.zip /tmp/sourcefile1,/tmp/{{grains.id}}.txt
salt ‘*’ archive.zip /tmp/zipfile.zip /tmp/sourcefile1,/tmp/sourcefile2
salt ‘*’ extfs.dump /dev/sda1
salt ‘*’ blockdev.tune /dev/sda1 read-ahead=1024 read-write=True
salt ‘*’ blockdev.wipe /dev/sda1
salt ‘*’ bridge.add br0
salt ‘*’ bridge.addif br0 eth0
salt ‘*’ bridge.delete br0
salt ‘*’ bridge.delif br0 eth0
salt ‘*’ bridge.find_interfaces eth0 [eth1…]
salt ‘*’ bridge.interfaces br0
salt ‘*’ bridge.list
salt ‘*’ bridge.show
salt ‘*’ bridge.show br0
salt ‘*’ bridge.stp br0 enable
salt ‘*’ bridge.stp br0 disable
salt ‘*’ bridge.stp bridge0 enable fxp0
salt ‘*’ bridge.stp bridge0 disable fxp0
salt ‘*’ buildout.bootstrap /srv/mybuildout
salt ‘*’ buildout.buildout /srv/mybuildout
salt ‘*’ buildout.run_buildout /srv/mybuildout
salt ‘*’ buildout.upgrade_bootstrap /srv/mybuildout
salt ‘*’ cloud.action start instance=myinstance
salt ‘*’ cloud.action stop instance=myinstance
salt ‘*’ cloud.action show_image provider=my-ec2-config image=ami-1624987f
salt ‘*’ cloud.destroy myinstance
salt ‘*’ cloud.full_query
salt ‘*’ cloud.list_images my-gce-config
salt ‘*’ cloud.list_locations my-gce-config
salt ‘*’ cloud.list_sizes my-gce-config
salt ‘*’ cloud.profile my-gce-config myinstance
salt ‘*’ cloud.query
salt ‘*’ cloud.query list_nodes_full
salt ‘*’ cloud.query list_nodes_select
salt ‘*’ cloud.select_query
salt ‘*’ cmd.exec_code ruby ‘puts “cheese”‘
salt ‘*’ cmd.has_exec cat
salt ‘*’ cmd.retcode “file /bin/bash”
salt ‘*’ cmd.retcode template=jinja “file {{grains.pythonpath[0]}}/python”
salt ‘*’ cmd.retcode “grep f” stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.run “ls -l | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run “Get-ChildItem C: ” shell=’powershell’
salt ‘*’ cmd.run “grep f” stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.run cmd=’sed -e s/=/:/g’
salt ‘*’ cmd.run_all “ls -l | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_all template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_all “grep f” stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.run_chroot /var/lib/lxc/container_name/rootfs ‘sh /tmp/bootstrap.sh’
salt ‘*’ cmd.run_stderr “ls -l | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_stderr template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_stderr “grep f” stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.run_stdout “ls -l | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_stdout template=jinja “ls -l /tmp/{{grains.id}} | awk ‘/foo/{print $2}'”
salt ‘*’ cmd.run_stdout “grep f” stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.script salt://scripts/runme.sh
salt ‘*’ cmd.script salt://scripts/runme.sh ‘arg1 arg2 “arg 3″‘
salt ‘*’ cmd.script salt://scripts/windows_task.ps1 args=’ -Input c:tmpinfile.txt’ shell=’powershell’
salt ‘*’ cmd.script salt://scripts/runme.sh stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.script_retcode salt://scripts/runme.sh
salt ‘*’ cmd.script_retcode salt://scripts/runme.sh stdin=’onentwonthreenfournfiven’
salt ‘*’ cmd.tty tty0 ‘This is a test’
salt ‘*’ cmd.tty pts3 ‘This is a test’
salt ‘*’ cmd.which cat
salt ‘*’ cmd.which_bin ‘[pip2, pip, pip-python]’
salt ‘*’ composer.install /var/www/application
salt ‘*’ composer.install /var/www/application no_dev=True optimize=True
salt ‘*’ config.backup_mode
salt ‘*’ config.dot_vals host
salt ‘*’ config.get pkg:apache
salt ‘*’ config.manage_mode
salt ‘*’ config.merge schedule
salt ‘*’ config.option redis.host
salt ‘*’ config.valid_fileproto salt://path/to/file
salt ‘*’ cp.cache_dir salt://path/to/dir
salt ‘*’ cp.cache_dir salt://path/to/dir include_pat=’E@*.py$’
salt ‘*’ cp.cache_file salt://path/to/file
salt ‘*’ cp.cache_files salt://pathto/file1,salt://pathto/file1
salt ‘*’ cp.cache_local_file /etc/hosts
salt ‘*’ cp.cache_master
salt ‘*’ cp.get_dir salt://path/to/dir/ /minion/dest
salt ‘*’ cp.get_file salt://path/to/file /minion/dest
salt ‘*’ cp.get_file “salt://{{grains.os}}/vimrc” /etc/vimrc template=jinja
salt ‘*’ cp.get_file_str salt://my/file
salt ‘*’ cp.get_template salt://path/to/template /minion/dest
salt ‘*’ cp.get_url salt://my/file /tmp/mine
salt ‘*’ cp.get_url http://www.slashdot.org /tmp/index.html
salt ‘*’ cp.hash_file salt://path/to/file
salt ‘*’ cp.is_cached salt://path/to/file
salt ‘*’ cp.list_master
salt ‘*’ cp.list_master_dirs
salt ‘*’ cp.list_master_symlinks
salt ‘*’ cp.list_minion
salt ‘*’ cp.list_states
salt ‘*’ cp.push /etc/fstab
salt ‘*’ cp.push /usr/lib/mysql
salt ‘*’ cp.push_dir /etc/modprobe.d/ glob=’*.conf’
salt ‘*’ cron.list_tab root
salt ‘*’ cron.list_tab root
salt ‘*’ cron.raw_cron root
salt ‘*’ cron.rm_job root /usr/local/weekly
salt ‘*’ cron.rm_job root /usr/bin/foo dayweek=1
salt ‘*’ cron.rm_env root MAILTO
salt ‘*’ cron.rm_job root /usr/local/weekly
salt ‘*’ cron.rm_job root /usr/bin/foo dayweek=1
salt ‘*’ cron.set_env root MAILTO user@example.com
salt ‘*’ cron.set_job root ‘*’ ‘*’ ‘*’ ‘*’ 1 /usr/local/weekly
salt ‘*’ cron.set_special root @hourly ‘echo foobar’
salt ‘*’ cron.write_cron_file root /tmp/new_cron
salt ‘*’ cron.write_cron_file_verbose root /tmp/new_cron
salt ‘*’ daemontools.available foo
salt ‘*’ daemontools.full_restart <service name>
salt ‘*’ daemontools.get_all
salt ‘*’ daemontools.missing foo
salt ‘*’ daemontools.reload <service name>
salt ‘*’ daemontools.restart <service name>
salt ‘*’ daemontools.start <service name>
salt ‘*’ daemontools.status <service name>
salt ‘*’ daemontools.stop <service name>
salt ‘*’ daemontools.term <service name>
salt ‘*’ data.cas <key> <value> <old_value>
salt ‘*’ data.clear
salt ‘*’ data.dump ‘{‘eggs': ‘spam’}’
salt ‘*’ data.getval <key>
salt ‘*’ data.getvals <key> [<key> …]
salt ‘*’ data.load
salt ‘*’ data.update <key> <value>
salt ‘*’ defaults.get core:users:root
salt ‘*’ disk.blkid
salt ‘*’ disk.blkid /dev/sda
salt ‘*’ disk.inodeusage
salt ‘*’ disk.percent /var
salt ‘*’ disk.usage
salt ‘*’ django.collectstatic <settings_module>
salt ‘*’ django.command <settings_module> <command>
salt ‘*’ django.createsuperuser <settings_module> user user@example.com
salt ‘*’ django.loaddata <settings_module> <comma delimited list of fixtures>
salt ‘*’ django.syncdb <settings_module>
salt ‘*’ dnsmasq.version
salt ‘*’ dnsmasq.get_config
salt ‘*’ dnsmasq.get_config file=/etc/dnsmasq.conf
salt ‘*’ dnsmasq.set_config domain=mydomain.com
salt ‘*’ dnsmasq.set_config follow=False domain=mydomain.com
salt ‘*’ dnsmasq.set_config file=/etc/dnsmasq.conf domain=mydomain.com
salt ‘*’ dnsmasq.version
salt ‘*’ dnsutil.hosts_append /etc/hosts 127.0.0.1 ad1.yuk.co,ad2.yuk.co
salt ‘*’ dnsutil.hosts_remove /etc/hosts ad1.yuk.co
salt ‘*’ dnsutil.hosts_remove /etc/hosts ad2.yuk.co,ad1.yuk.co
salt ‘*’ dnsutil.parse_hosts
salt ‘*’ environ.get foo
salt ‘*’ environ.get baz default=False
salt ‘*’ environ.has_value foo
salt ‘*’ environ.item foo
salt ‘*’ environ.item ‘[foo, baz]’ default=None
salt ‘*’ environ.items
salt ‘*’ environ.setenv ‘{“foo”: “bar”, “baz”: “quux”}’
salt ‘*’ environ.setenv ‘{“a”: “b”, “c”: False}’ false_unsets=True
salt ‘*’ environ.setval foo bar
salt ‘*’ environ.setval baz val=False false_unsets=True
salt ‘*’ event.fire ‘{“data”:”my event data”}’ ‘tag’
salt ‘*’ event.fire_master ‘{“data”:”my event data”}’ ‘tag’
salt ‘*’ extfs.attributes /dev/sda1
salt ‘*’ extfs.blocks /dev/sda1
salt ‘*’ extfs.dump /dev/sda1
salt ‘*’ extfs.mkfs /dev/sda1 fs_type=ext4 opts=’acl,noexec’
salt ‘*’ extfs.tune /dev/sda1 force=True label=wildstallyns opts=’acl,noexec’
salt ‘*’ file.access /path/to/file f
salt ‘*’ file.access /path/to/file x
salt ‘*’ file.append /etc/motd
salt ‘*’ file.append /etc/motd args=’cheese=spam’
salt ‘*’ file.append /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ file.blockreplace /etc/hosts ‘#– start managed zone foobar : DO NOT EDIT –‘
salt ‘*’ file.check_file_meta /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ base
salt ‘*’ file.check_hash /etc/fstab md5:<md5sum>
salt ‘*’ file.check_managed /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ jinja True None None base
salt ‘*’ file.check_managed_changes /etc/httpd/conf.d/httpd.conf salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root, root, ‘755’ jinja True None None base
salt ‘*’ file.check_perms /etc/sudoers ‘{}’ root root 400
salt ‘*’ file.chgrp /etc/passwd root
salt ‘*’ file.chown /etc/passwd root root
salt ‘*’ file.comment /etc/modules pcspkr
salt ‘*’ file.contains /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.contains_glob /etc/foobar ‘*cheese*’
salt ‘*’ file.contains_regex /etc/crontab
salt ‘*’ file.contains_regex_multiline /etc/crontab ‘^maint’
salt ‘*’ file.copy /path/to/src /path/to/dst
salt ‘*’ file.copy /path/to/src_dir /path/to/dst_dir recurse=True
salt ‘*’ file.copy /path/to/src_dir /path/to/dst_dir recurse=True remove_existing=True
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.directory_exists /etc
salt ‘*’ file.extract_hash /etc/foo sha512 /path/to/hash/file
salt ‘*’ file.file_exists /etc/passwd
salt ‘*’ file.find / type=f name=*.bak size= 10m
salt ‘*’ file.find /var mtime= 30d size= 10m print=path,size,mtime
salt ‘*’ file.find /var/log name=*.[0-9] mtime= 30d size= 10m delete
salt ‘*’ file.get_devmm /dev/chr
salt ‘*’ file.get_diff /home/fred/.vimrc salt://users/fred/.vimrc
salt ‘*’ file.get_gid /etc/passwd
salt ‘*’ file.get_group /etc/passwd
salt ‘*’ file.get_hash /etc/shadow
salt ‘*’ file.get_managed /etc/httpd/conf.d/httpd.conf jinja salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root root ‘755’ base None None
salt ‘*’ file.get_mode /etc/passwd
salt ‘*’ file.get_selinux_context /etc/hosts
salt ‘*’ file.get_sum /etc/passwd sha512
salt ‘*’ file.get_uid /etc/passwd
salt ‘*’ file.get_user /etc/passwd
salt ‘*’ file.gid_to_group 0
salt ‘*’ file.grep /etc/passwd nobody
salt ‘*’ file.grep /etc/sysconfig/network-scripts/ifcfg-eth0 ipaddr ” -i”
salt ‘*’ file.grep /etc/sysconfig/network-scripts/ifcfg-eth0 ipaddr ” -i -B2″
salt ‘*’ file.grep “/etc/sysconfig/network-scripts/*” ipaddr ” -i -l”
salt ‘*’ file.group_to_gid root
salt ‘*’ file.is_blkdev /dev/blk
salt ‘*’ file.is_chrdev /dev/chr
salt ‘*’ file.is_fifo /dev/fifo
salt ‘*’ file.is_link /path/to/link
salt ‘*’ file.join ‘/’ ‘usr’ ‘local’ ‘bin’
salt ‘*’ file.chown /etc/passwd root root
salt ‘*’ file.link /path/to/file /path/to/link
salt ‘*’ file.list_backups /foo/bar/baz.txt
salt ‘*’ file.list_backups /foo/bar/baz.txt
salt ‘*’ file.lstat /path/to/file
salt ‘*’ file.makedirs /opt/code/
salt ‘*’ file.makedirs_perms /opt/code
salt ‘*’ file.manage_file /etc/httpd/conf.d/httpd.conf ” ‘{}’ salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ root root ‘755’ base ”
salt ‘*’ file.mkdir /opt/jetty/context
salt ‘*’ file.mknod /dev/chr c 180 31
salt ‘*’ file.mknod /dev/blk b 8 999
salt ‘*’ file.nknod /dev/fifo p
salt ‘*’ file.mknod_blkdev /dev/blk 8 999
salt ‘*’ file.mknod_chrdev /dev/chr 180 31
salt ‘*’ file.mknod_fifo /dev/fifo
salt ‘*’ file.open_files
salt ‘*’ file.open_files by_pid=True
salt ‘*’ file.pardir
salt ‘*’ file.patch /opt/file.txt /tmp/file.txt.patch
salt ‘*’ file.path_exists_glob /etc/pam*/pass*
salt ‘*’ file.prepend /etc/motd
salt ‘*’ file.prepend /etc/motd args=’cheese=spam’
salt ‘*’ file.prepend /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ file.sed /etc/httpd/httpd.conf ‘LogLevel warn’ ‘LogLevel info’
salt ‘*’ file.readdir /path/to/dir/
salt ‘*’ file.readlink /path/to/link
salt ‘*’ file.remove /tmp/foo
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.rename /path/to/src /path/to/dst
salt ‘*’ file.replace /path/to/file pattern=”bind-addresss*=” repl=’bind-address:’
salt ‘*’ file.replace /path/to/file pattern=’=’ repl=':’
salt ‘*’ file.replace /etc/httpd/httpd.conf pattern=’LogLevel warn’ repl=’LogLevel info’
salt ‘*’ file.replace /some/file pattern=’before’ repl=’after’ flags='[MULTILINE, IGNORECASE]’
salt ‘*’ file.restore_backup /foo/bar/baz.txt 0
salt ‘*’ file.restorecon /home/user/.ssh/authorized_keys
salt ‘*’ file.rmdir /tmp/foo/
salt ‘*’ file.search /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.sed /etc/httpd/httpd.conf ‘LogLevel warn’ ‘LogLevel info’
salt ‘*’ file.contains /etc/crontab ‘mymaintenance.sh’
salt ‘*’ file.seek_read /path/to/file 4096 0
salt ‘*’ file.seek_write /path/to/file ‘some data’ 4096
salt ‘*’ file.set_mode /etc/passwd 0644
salt ‘*’ file.set_selinux_context path <role> <type> <range>
salt ‘*’ file.source_list salt://http/httpd.conf ‘{hash_type: ‘md5′, ‘hsum': <md5sum>}’ base
salt ‘*’ file.stats /etc/passwd
salt ‘*’ file.statvfs /path/to/file
salt ‘*’ file.symlink /path/to/file /path/to/link
salt ‘*’ file.touch /var/log/emptyfile
salt ‘*’ file.truncate /path/to/file 512
salt ‘*’ file.uid_to_user 0
salt ‘*’ file.uncomment /etc/hosts.deny ‘ALL: PARANOID’
salt ‘*’ file.user_to_uid root
salt ‘*’ file.write /etc/motd
salt ‘*’ file.write /etc/motd args=’cheese=spam’
salt ‘*’ file.write /etc/motd args=”[‘cheese=spam’,’spam=cheese’]”
salt ‘*’ gem.install vagrant
salt ‘*’ gem.list
salt ‘*’ gem.sources_add http://rubygems.org/
salt ‘*’ gem.sources_list
salt ‘*’ gem.sources_remove http://rubygems.org/
salt ‘*’ gem.uninstall vagrant
salt ‘*’ gem.update vagrant
salt ‘*’ gem.update_system
salt ‘*’ grains.append key val
salt ‘*’ grains.delval key
salt ‘*’ grains.filter_by ‘{Debian: Debheads rule, RedHat: I love my hat}’
salt ‘*’ grains.filter_by ‘{A: B, C: {D: {E: F,G: H}}}’ ‘xxx’ ‘{D: {E: I},J: K}’ ‘C’
salt ‘*’ grains.get pkg:apache
salt ‘*’ grains.get_or_set_hash ‘django:SECRET_KEY’ 50
salt ‘*’ grains.has_value pkg:apache
salt ‘*’ grains.item os
salt ‘*’ grains.item os osrelease oscodename
salt ‘*’ grains.item host sanitize=True
salt ‘*’ grains.items
salt ‘*’ grains.items sanitize=True
salt ‘*’ grains.ls
salt ‘*’ grains.remove key val
salt ‘*’ grains.setval key val
salt ‘*’ grains.setval key “{‘sub-key': ‘val’, ‘sub-key2′: ‘val2′}”
salt ‘*’ grains.setvals “{‘key1′: ‘val1′, ‘key2′: ‘val2′}”
salt ‘*’ group.add foo 3456
salt ‘*’ group.adduser foo bar
salt ‘*’ group.chgid foo 4376
salt ‘*’ group.delete foo
salt ‘*’ group.deluser foo bar
salt ‘*’ group.getent
salt ‘*’ group.info foo
salt ‘*’ group.members foo ‘user1,user2,user3,…’
salt ‘*’ grub.conf
salt ‘*’ grub.version
salt ‘*’ hashutil.base64_decodestring ‘Z2V0IHNhbHRlZA==
salt ‘*’ hashutil.base64_encodestring ‘get salted’
salt ‘*’ hashutil.hmac_signature ‘get salted’ ‘shared secret’ ‘NS2BvKxFRk rndAlFbCYIFNVkPtI/3KiIYQw4okNKU8=’
salt ‘*’ hashutil.md5_digest ‘get salted’
salt ‘*’ hashutil.sha256_digest ‘get salted’
salt ‘*’ hashutil.sha512_digest ‘get salted’
salt ‘*’ hg.archive /path/to/repo output=/tmp/archive.tgz fmt=tgz
salt ‘*’ hg.clone /path/to/repo https://bitbucket.org/birkenfeld/sphinx
salt ‘*’ hg.describe /path/to/repo
salt ‘*’ hg.pull /path/to/repo opts=-u
salt ‘*’ hg.revision /path/to/repo mybranch
salt ‘*’ hosts.add_host <ip> <alias>
salt ‘*’ hosts.get_alias <ip addr>
salt ‘*’ hosts.get_ip <hostname>
salt ‘*’ hosts.has_pair <ip> <alias>
salt ‘*’ hosts.list_hosts
salt ‘*’ hosts.rm_host <ip> <alias>
salt ‘*’ hosts.set_host <ip> <alias>
salt ‘*’ img.bootstrap /srv/salt-images/host.qcow 4096 qcow2
salt ‘*’ img.mount_image /tmp/foo
salt ‘*’ img.mount_image /tmp/foo
salt ‘*’ img.umount_image /mnt/foo
salt ‘*’ incron.list_tab root
salt ‘*’ incron.list_tab root
salt ‘*’ incron.raw_cron root
salt ‘*’ incron.raw_system_cron
salt ‘*’ incron.rm_job root /path
salt ‘*’ incron.rm_job root /path
salt ‘*’ incron.set_job root ‘/root’ ‘IN_MODIFY’ ‘echo “$$ $@ $# $% $&”‘
salt ‘*’ incron.write_incron_file_verbose root /tmp/new_cron
salt ‘*’ incron.write_cron_file root /tmp/new_cron
salt ‘*’ ini.get_option /path/to/ini section_name option_name
salt ‘*’ ini.get_section /path/to/ini section_name
salt ‘*’ ini.remove_option /path/to/ini section_name option_name
salt ‘*’ ini.remove_section /path/to/ini section_name
salt ‘*’ ini.set_option /path/to/ini ‘{section_foo: {key: value}}’
salt ‘*’ ip.apply_network_settings
salt ‘*’ ip.build_bond bond0 mode=balance-alb
salt ‘*’ ip.build_interface eth0 eth <settings>
salt ‘*’ ip.build_network_settings <settings>
salt ‘*’ ip.build_routes eth0 <settings>
salt ‘*’ ip.down eth0
salt ‘*’ ip.get_bond bond0
salt ‘*’ ip.get_interface eth0
salt ‘*’ ip.get_network_settings
salt ‘*’ ip.get_routes eth0
salt ‘*’ ip.up eth0
salt ‘*’ iptables.append filter INPUT
salt ‘*’ iptables.append filter INPUT
salt ‘*’ iptables.build_rule match=state
salt ‘*’ iptables.build_rule filter INPUT command=I position=3
salt ‘*’ iptables.build_rule filter INPUT command=A
salt ‘*’ iptables.build_rule filter INPUT command=A
salt ‘*’ iptables.build_rule filter INPUT command=A
salt ‘*’ iptables.build_rule match=state
salt ‘*’ iptables.build_rule filter INPUT command=I position=3
salt ‘*’ iptables.check filter INPUT
salt ‘*’ iptables.check filter INPUT
salt ‘*’ iptables.check_chain filter INPUT
salt ‘*’ iptables.check_chain filter INPUT family=ipv6
salt ‘*’ iptables.delete filter INPUT position=3
salt ‘*’ iptables.delete filter INPUT
salt ‘*’ iptables.delete filter INPUT position=3 family=ipv6
salt ‘*’ iptables.delete filter INPUT
salt ‘*’ iptables.delete_chain filter CUSTOM_CHAIN
salt ‘*’ iptables.delete_chain filter CUSTOM_CHAIN family=ipv6
salt ‘*’ iptables.flush filter INPUT
salt ‘*’ iptables.flush filter INPUT family=ipv6
salt ‘*’ iptables.get_policy filter INPUT
salt ‘*’ iptables.get_policy filter INPUT family=ipv6
salt ‘*’ iptables.get_rules
salt ‘*’ iptables.get_rules family=ipv6
salt ‘*’ iptables.get_saved_policy filter INPUT
salt ‘*’ iptables.get_saved_policy filter INPUT
salt ‘*’ iptables.get_saved_policy filter INPUT family=ipv6
salt ‘*’ iptables.get_saved_policy filter INPUT
salt ‘*’ iptables.get_saved_rules
salt ‘*’ iptables.get_saved_rules family=ipv6
salt ‘*’ iptables.insert filter INPUT position=3
salt ‘*’ iptables.insert filter INPUT position=3
salt ‘*’ iptables.new_chain filter CUSTOM_CHAIN
salt ‘*’ iptables.new_chain filter CUSTOM_CHAIN family=ipv6
salt ‘*’ iptables.save /etc/sysconfig/iptables
salt ‘*’ iptables.save /etc/sysconfig/iptables family=ipv6
salt ‘*’ iptables.set_policy filter INPUT ACCEPT
salt ‘*’ iptables.set_policy filter INPUT ACCEPT family=ipv6
salt ‘*’ iptables.version
salt ‘*’ iptables.version family=ipv6
salt ‘*’ key.finger
salt ‘*’ key.finger_master
salt ‘*’ kmod.available
salt ‘*’ kmod.check_available kvm
salt ‘*’ kmod.is_loaded kvm
salt ‘*’ kmod.load kvm
salt ‘*’ kmod.lsmod
salt ‘*’ kmod.mod_list
salt ‘*’ kmod.remove kvm
salt ‘*’ locale.avail ‘en_US.UTF-8′
salt ‘*’ locale.gen_locale ‘en_US.UTF-8′
salt ‘*’ locale.get_locale
salt ‘*’ locale.list_avail
salt ‘*’ locale.set_locale ‘en_US.UTF-8′
salt ‘*’ locate.locate
salt ‘*’ locate.stats
salt ‘*’ locate.updatedb
salt ‘*’ locate.version
salt ‘*’ logrotate.set rotate 2
salt ‘*’ logrotate.set /var/log/wtmp rotate 2
salt ‘*’ logrotate.show_conf
salt ‘*’ lowpkg.file_dict httpd
salt ‘*’ lowpkg.file_dict httpd postfix
salt ‘*’ lowpkg.file_dict
salt ‘*’ lowpkg.file_list httpd
salt ‘*’ lowpkg.file_list httpd postfix
salt ‘*’ lowpkg.file_list
salt ‘*’ lowpkg.list_pkgs
salt ‘*’ lowpkg.verify
salt ‘*’ lowpkg.verify httpd
salt ‘*’ lowpkg.verify ‘httpd postfix’
salt ‘*’ lowpkg.verify ‘httpd postfix’ ignore_types=[‘config’,’doc’]
salt ‘*’ lvm.fullversion
salt ‘*’ lvm.lvcreate new_volume_name vg_name size=10G
salt ‘*’ lvm.lvcreate new_volume_name vg_name extents=100 /dev/sdb
salt ‘*’ lvm.lvcreate new_snapshot vg_name snapshot=volume_name size=3G
salt ‘*’ lvm.lvdisplay
salt ‘*’ lvm.lvdisplay /dev/vg_myserver/root
salt ‘*’ lvm.lvremove lvname vgname force=True
salt ‘*’ lvm.pvdisplay
salt ‘*’ lvm.pvdisplay /dev/md0
salt ‘*’ lvm.version
salt ‘*’ lvm.vgdisplay
salt ‘*’ lvm.vgdisplay nova-volumes
salt ‘*’ match.compound ‘L@cheese,foo and *’
salt ‘*’ match.data ‘spam:eggs’
salt ‘*’ match.filter_by ‘{foo*: Foo!, bar*: Bar!}’ minion_id=bar03
salt ‘*’ match.glob ‘*’
salt ‘*’ match.grain ‘os:Ubuntu’
salt ‘*’ match.grain ‘ipv6|2001:db8::ff00:42:8329′ delimiter=’|’
salt ‘*’ match.grain_pcre ‘os:Fedo.*’
salt ‘*’ match.grain_pcre ‘ipv6|2001:.*’ delimiter=’|’
salt ‘*’ match.ipcidr ‘192.168.44.0/24′
salt ‘*’ match.list ‘server1,server2′
salt ‘*’ match.pcre ‘.*’
salt ‘*’ match.pillar ‘cheese:foo’
salt ‘*’ match.pillar ‘clone_url|https://github.com/saltstack/salt.git’ delimiter=’|’
salt ‘*’ mine.delete ‘network.interfaces’
salt ‘*’ mine.flush
salt ‘*’ mine.get ‘*’ network.interfaces
salt ‘*’ mine.get ‘os:Fedora’ network.interfaces grain
salt ‘*’ mine.get ‘os:Fedora and S@192.168.5.0/24′ network.ipaddrs compound
salt ‘*’ mine.get_docker
salt ‘*’ mine.get_docker interfaces=’eth0′
salt ‘*’ mine.get_docker interfaces='[“eth0″, “eth1″]’
salt ‘*’ mine.get_docker cidrs=’107.170.147.0/24′
salt ‘*’ mine.get_docker cidrs='[“107.170.147.0/24″, “172.17.42.0/24″]’
salt ‘*’ mine.get_docker interfaces='[“eth0″, “eth1″]’ cidrs='[“107.170.147.0/24″, “172.17.42.0/24″]’
salt ‘*’ mine.send network.interfaces eth0
salt ‘*’ mine.update
salt ‘*’ modjk.bulk_activate node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_activate node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_activate [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_activate [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_disable node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_disable node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_disable [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_disable [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_recover node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_recover node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_recover [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_recover [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.bulk_stop node1,node2,node3 loadbalancer1
salt ‘*’ modjk.bulk_stop node1,node2,node3 loadbalancer1 other-profile
salt ‘*’ modjk.bulk_stop [“node1″,”node2″,”node3″] loadbalancer1
salt ‘*’ modjk.bulk_stop [“node1″,”node2″,”node3″] loadbalancer1 other-profile
salt ‘*’ modjk.dump_config
salt ‘*’ modjk.dump_config other-profile
salt ‘*’ modjk.get_running
salt ‘*’ modjk.get_running other-profile
salt ‘*’ modjk.lb_edit loadbalancer1 “{‘vlr': 1, ‘vlt': 60}”
salt ‘*’ modjk.lb_edit loadbalancer1 “{‘vlr': 1, ‘vlt': 60}” other-profile
salt ‘*’ modjk.list_configured_members loadbalancer1
salt ‘*’ modjk.list_configured_members loadbalancer1 other-profile
salt ‘*’ modjk.recover_all loadbalancer1
salt ‘*’ modjk.recover_all loadbalancer1 other-profile
salt ‘*’ modjk.reset_stats loadbalancer1
salt ‘*’ modjk.reset_stats loadbalancer1 other-profile
salt ‘*’ modjk.version
salt ‘*’ modjk.version other-profile
salt ‘*’ modjk.worker_activate node1 loadbalancer1
salt ‘*’ modjk.worker_activate node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_disable node1 loadbalancer1
salt ‘*’ modjk.worker_disable node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_edit node1 loadbalancer1 “{‘vwf': 500, ‘vwd': 60}”
salt ‘*’ modjk.worker_edit node1 loadbalancer1 “{‘vwf': 500, ‘vwd': 60}” other-profile
salt ‘*’ modjk.worker_recover node1 loadbalancer1
salt ‘*’ modjk.worker_recover node1 loadbalancer1 other-profile
salt ‘*’ modjk.worker_status node1
salt ‘*’ modjk.worker_status node1 other-profile
salt ‘*’ modjk.worker_activate node1 loadbalancer1
salt ‘*’ modjk.worker_activate node1 loadbalancer1 other-profile
salt ‘*’ modjk.workers
salt ‘*’ modjk.workers other-profile
salt ‘*’ mount.active
salt ‘*’ mount.fstab
salt ‘*’ mount.is_fuse_exec sshfs
salt ‘*’ mount.is_mounted /mnt/share
salt ‘*’ mount.mount /mnt/foo /dev/sdz1 True
salt ‘*’ mount.remount /mnt/foo /dev/sdz1 True
salt ‘*’ mount.rm_fstab /mnt/foo
salt ‘*’ mount.set_fstab /mnt/foo /dev/sdz1 ext4
salt ‘*’ mount.swapoff /root/swapfile
salt ‘*’ mount.swapon /root/swapfile
salt ‘*’ mount.swaps
salt ‘*’ mount.umount /mnt/foo
salt ‘*’ network.active_tcp
salt ‘*’ network.arp
salt ‘*’ network.connect archlinux.org 80
salt ‘*’ network.connect archlinux.org 80 timeout=3
salt ‘*’ network.connect archlinux.org 80 timeout=3 family=ipv4
salt ‘*’ network.connect google-public-dns-a.google.com port=53 proto=udp timeout=3
salt ‘*’ network.dig archlinux.org
salt ‘*’ network.get_hostname
salt ‘*’ network.hw_addr eth0
salt ‘*’ network.hw_addr eth0
salt ‘*’ network.in_subnet 10.0.0.0/16
salt ‘*’ network.interface eth0
salt ‘*’ network.interface_ip eth0
salt ‘*’ network.interfaces
salt ‘*’ network.ip_addrs
salt ‘*’ network.ip_addrs6
salt ‘*’ network.ip_addrs
salt ‘*’ network.ip_addrs6
salt ‘*’ network.is_loopback 127.0.0.1
salt ‘*’ network.is_private 10.0.0.3
salt ‘*’ network.mod_hostname master.saltstack.com
salt ‘*’ network.netstat
salt ‘*’ network.ping archlinux.org
salt ‘*’ network.subnets
salt ‘*’ network.traceroute archlinux.org
salt ‘*’ pillar.items
salt ‘*’ pillar.ext ‘{libvirt: _}’
salt ‘*’ pillar.get pkg:apache
salt ‘*’ pillar.item foo
salt ‘*’ pillar.item foo bar baz
salt ‘*’ pillar.items
salt ‘*’ pillar.raw
salt ‘*’ pillar.raw key=’roles’
salt ‘*’ pip.freeze /home/code/path/to/virtualenv/
salt ‘*’ pip.install <package name>,<package2 name>
salt ‘*’ pip.install requirements=/path/to/requirements.txt
salt ‘*’ pip.install <package name> bin_env=/path/to/virtualenv
salt ‘*’ pip.install <package name> bin_env=/path/to/pip_bin
salt ‘*’ pip.install markdown,django editable=git https://github.com/worldcompany/djangoembed.git#egg=djangoembed upgrade=True no_deps=True
salt ‘*’ pip.list salt
salt ‘*’ pip.uninstall <package name>,<package2 name>
salt ‘*’ pip.uninstall requirements=/path/to/requirements.txt
salt ‘*’ pip.uninstall <package name> bin_env=/path/to/virtualenv
salt ‘*’ pip.uninstall <package name> bin_env=/path/to/pip_bin
salt ‘*’ pip.version
salt ‘*’ pkg.latest_version <package name>
salt ‘*’ pkg.latest_version <package name> fromrepo=epel-testing
salt ‘*’ pkg.latest_version <package name> disableexcludes=main
salt ‘*’ pkg.latest_version <package1> <package2> <package3> …
salt ‘*’ pkg.check_db <package1> <package2> <package3>
salt ‘*’ pkg.check_db <package1> <package2> <package3> fromrepo=epel-testing
salt ‘*’ pkg.check_db <package1> <package2> <package3> disableexcludes=main
salt ‘*’ pkg.clean_metadata
salt ‘*’ pkg.del_repo myrepo
salt ‘*’ pkg.del_repo myrepo basedir=/path/to/dir
salt ‘*’ pkg.file_list httpd
salt ‘*’ pkg.file_list httpd postfix
salt ‘*’ pkg.file_list
salt ‘*’ pkg.file_list httpd
salt ‘*’ pkg.file_list httpd postfix
salt ‘*’ pkg.file_list
salt ‘*’ pkg.get_locked_packages
salt ‘*’ pkg.get_repo myrepo
salt ‘*’ pkg.get_repo myrepo basedir=/path/to/dir
salt ‘*’ pkg.group_diff ‘Perl Support’
salt ‘*’ pkg.group_info ‘Perl Support’
salt ‘*’ pkg.group_install ‘Group 1′
salt ‘*’ pkg.group_install ‘Group 1,Group 2′
salt ‘*’ pkg.group_install ‘[“Group 1″, “Group 2″]’
salt ‘*’ pkg.group_install ‘My Group’ skip=’foo,bar’
salt ‘*’ pkg.group_install ‘My Group’ skip='[“foo”, “bar”]’
salt ‘*’ pkg.group_install ‘My Group’ include=’foo,bar’
salt ‘*’ pkg.group_install ‘My Group’ include='[“foo”, “bar”]’
salt ‘*’ pkg.group_list
salt ‘*’ pkg.hold <package name>
salt ‘*’ pkg.hold pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.install <package name>
salt ‘*’ pkg.install pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.install pkgs='[“foo”, {“bar”: “1.2.3-4.el5″}]’
salt ‘*’ pkg.install sources='[{“foo”: “salt://foo.rpm”}, {“bar”: “salt://bar.rpm”}]’
salt ‘*’ pkg.latest_version <package name>
salt ‘*’ pkg.latest_version <package name> fromrepo=epel-testing
salt ‘*’ pkg.latest_version <package name> disableexcludes=main
salt ‘*’ pkg.latest_version <package1> <package2> <package3> …
salt ‘*’ pkg.list_pkgs
salt ‘*’ pkg.list_repo_pkgs
salt ‘*’ pkg.list_repo_pkgs foo bar baz
salt ‘*’ pkg.list_repo_pkgs ‘samba4*’ fromrepo=base,updates
salt ‘*’ pkg.list_repos
salt ‘*’ pkg.list_upgrades
salt ‘*’ pkg.mod_repo reponame enabled=1 gpgcheck=1
salt ‘*’ pkg.mod_repo reponame basedir=/path/to/dir enabled=1
salt ‘*’ pkg.mod_repo reponame baseurl= mirrorlist=http://host.com/
salt ‘*’ pkg.normalize_name zsh.x86_64
salt ‘*’ pkg.owner /usr/bin/apachectl
salt ‘*’ pkg.owner /usr/bin/apachectl /etc/httpd/conf/httpd.conf
salt ‘*’ pkg.purge <package name>
salt ‘*’ pkg.purge <package1>,<package2>,<package3>
salt ‘*’ pkg.purge pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.refresh_db
salt ‘*’ pkg.remove <package name>
salt ‘*’ pkg.remove <package1>,<package2>,<package3>
salt ‘*’ pkg.remove pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.unhold <package name>
salt ‘*’ pkg.unhold pkgs='[“foo”, “bar”]’
salt ‘*’ pkg.upgrade
salt ‘*’ pkg.upgrade_available <package name>
salt ‘*’ pkg.verify
salt ‘*’ pkg.verify httpd
salt ‘*’ pkg.verify ‘httpd postfix’
salt ‘*’ pkg.verify ‘httpd postfix’ ignore_types=[‘config’,’doc’]
salt ‘*’ pkg.version <package name>
salt ‘*’ pkg.version <package1> <package2> <package3> …
salt ‘*’ pkg_resource.add_pkg ‘{}’ bind 9
salt ‘*’ pkg_resource.check_extra_requirements <pkgname> <extra_requirements>
salt ‘*’ pkg_resource.pack_sources ‘[{“foo”: “salt://foo.rpm”}, {“bar”: “salt://bar.rpm”}]’
salt ‘*’ pkg_resource.parse_targets
salt ‘*’ pkg_resource.sort_pkglist ‘[“3.45″, “2.13”]’
salt ‘*’ pkg_resource.stringify ‘vim: 7.127′
salt ‘*’ pkg_resource.version vim
salt ‘*’ pkg_resource.version foo bar baz
salt ‘*’ pkg_resource.version ‘python*’
salt ‘*’ pkg_resource.version_clean <version_string>
salt ‘*’ publish.full_data test.kwarg arg=’cheese=spam’
salt ‘*’ publish.publish test.kwarg arg=’cheese=spam’
salt ‘*’ pyenv.default
salt ‘*’ pyenv.default 2.0.0-p0
salt ‘*’ pyenv.do ‘gem list bundler’
salt ‘*’ pyenv.do ‘gem list bundler’ deploy
salt ‘*’ pyenv.do_with_python 2.0.0-p0 ‘gem list bundler’
salt ‘*’ pyenv.do_with_python 2.0.0-p0 ‘gem list bundler’ deploy
salt ‘*’ pyenv.install
salt ‘*’ pyenv.install_python 2.0.0-p0
salt ‘*’ pyenv.is_installed
salt ‘*’ pyenv.list
salt ‘*’ pyenv.rehash
salt ‘*’ pyenv.uninstall_python 2.0.0-p0
salt ‘*’ pyenv.update
salt ‘*’ pyenv.versions
salt ‘*’ raid.assemble /dev/md0 [‘/dev/xvdd’, ‘/dev/xvde’]
salt ‘*’ raid.create /dev/md0 level=1 chunk=256 devices=”[‘/dev/xvdd’, ‘/dev/xvde’]” test_mode=True
salt ‘*’ raid.detail /dev/md0
salt ‘*’ raid.destroy /dev/md0
salt ‘*’ raid.detail ‘/dev/md0′
salt ‘*’ raid.list
salt ‘*’ raid.save_config
salt ‘*’ random.get_str 128
salt ‘*’ random.hash ‘I am a string’ md5
salt ‘*’ random.shadow_hash ‘My5alT’ ‘MyP@asswd’ md5
salt ‘*’ random.str_encode ‘I am a new string’ base64
salt ‘*’ rbenv.default
salt ‘*’ rbenv.default 2.0.0-p0
salt ‘*’ rbenv.do ‘gem list bundler’
salt ‘*’ rbenv.do ‘gem list bundler’ deploy
salt ‘*’ rbenv.do_with_ruby 2.0.0-p0 ‘gem list bundler’
salt ‘*’ rbenv.do_with_ruby 2.0.0-p0 ‘gem list bundler’ deploy
salt ‘*’ rbenv.install
salt ‘*’ rbenv.install_ruby 2.0.0-p0
salt ‘*’ rbenv.is_installed
salt ‘*’ rbenv.list
salt ‘*’ rbenv.rehash
salt ‘*’ rbenv.uninstall_ruby 2.0.0-p0
salt ‘*’ rbenv.update
salt ‘*’ rbenv.versions
salt ‘*’ ret.get_fun mysql network.interfaces
salt ‘*’ ret.get_jid redis 20421104181954700505
salt ‘*’ ret.get_jids mysql
salt ‘*’ ret.get_minions mysql
salt ‘*’ rsync.config
salt ‘*’ rsync.rsync {src} {dst} {delete=True} {update=True} {passwordfile=/etc/pass.crt} {exclude=xx}
salt ‘*’ rsync.rsync {src} {dst} {delete=True} {excludefrom=/xx.ini}
salt ‘*’ rsync.version
salt ‘*’ rvm.do 2.0.0 <command>
salt ‘*’ rvm.gemset_copy foobar bazquo
salt ‘*’ rvm.gemset_create 2.0.0 foobar
salt ‘*’ rvm.gemset_delete 2.0.0 foobar
salt ‘*’ rvm.gemset_empty 2.0.0 foobar
salt ‘*’ rvm.gemset_list
salt ‘*’ rvm.gemset_list_all
salt ‘*’ rvm.get
salt ‘*’ rvm.install
salt ‘*’ rvm.install_ruby 1.9.3-p385
salt ‘*’ rvm.is_installed
salt ‘*’ rvm.list
salt ‘*’ rvm.reinstall_ruby 1.9.3-p385
salt ‘*’ rvm.rubygems 2.0.0 1.8.24
salt ‘*’ rvm.set_default 2.0.0
salt ‘*’ rvm.wrapper <ruby_string> <wrapper_prefix>
salt ‘*’ saltutil.clear_cache
salt ‘*’ saltutil.cmd
salt ‘*’ saltutil.cmd
salt ‘*’ saltutil.find_cached_job <job id>
salt ‘*’ saltutil.find_job <job id>
salt ‘*’ saltutil.is_running state.highstate
salt ‘*’ saltutil.kill_job <job id>
salt ‘*’ saltutil.mmodule base test.ping
salt ‘*’ saltutil.refresh_modules
salt ‘*’ saltutil.refresh_pillar
salt ‘*’ saltutil.regen_keys
salt ‘*’ saltutil.revoke_auth
salt ‘*’ saltutil.runner jobs.list_jobs
salt ‘*’ saltutil.running
salt ‘*’ saltutil.signal_job <job id> 15
salt ‘*’ saltutil.sync_all
salt ‘*’ saltutil.sync_grains
salt ‘*’ saltutil.sync_modules
salt ‘*’ saltutil.sync_outputters
salt ‘*’ saltutil.sync_renderers
salt ‘*’ saltutil.sync_returners
salt ‘*’ saltutil.sync_states
salt ‘*’ saltutil.sync_utils
salt ‘*’ saltutil.term_job <job id>
salt ‘*’ saltutil.update
salt ‘*’ saltutil.update 0.10.3
salt ‘*’ saltutil.wheel key.accept match=jerry
salt ‘*’ schedule.add job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.build_schedule_item job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.delete job1
salt ‘*’ schedule.disable
salt ‘*’ schedule.disable_job job1
salt ‘*’ schedule.enable
salt ‘*’ schedule.enable_job job1
salt ‘*’ schedule.list
salt ‘*’ schedule.list show_all=True
salt ‘*’ schedule.modify job1 function=’test.ping’ seconds=3600
salt ‘*’ schedule.purge
salt ‘*’ schedule.reload
salt ‘*’ schedule.run_job job1
salt ‘*’ schedule.run_job job1 force=True
salt ‘*’ schedule.save
salt ‘minion’ seed.apply path id [config=config_data]
salt ‘minion’ seed.mkconfig [config=config_data] [tmp=tmp_dir]
salt ‘*’ serverdensity_device.create lama
salt ‘*’ serverdensity_device.create rich_lama group=lama_band installedRAM=32768
salt ‘*’ serverdensity_device.delete 51f7eafcdba4bb235e000ae4
salt ‘*’ serverdensity_device.get_sd_auth <val>
salt ‘*’ serverdensity_device.install_agent c2bbdd6689ff46282bdaa07555641498
salt ‘*’ serverdensity_device.ls
salt ‘*’ serverdensity_device.ls name=lama
salt ‘*’ serverdensity_device.ls name=lama group=lama_band installedRAM=32768
salt ‘*’ serverdensity_device.update 51f7eafcdba4bb235e000ae4 name=lama group=lama_band
salt ‘*’ serverdensity_device.update 51f7eafcdba4bb235e000ae4 name=better_lama group=rock_lamas swapSpace=512
salt ‘*’ service.available sshd
salt ‘*’ service.available sshd limit=upstart
salt ‘*’ service.available sshd limit=sysvinit
salt ‘*’ service.disable <service name>
salt ‘*’ service.disabled <service name>
salt ‘*’ service.enable <service name>
salt ‘*’ service.enabled <service name>
salt ‘*’ service.get_all
salt ‘*’ service.get_all limit=upstart
salt ‘*’ service.get_all limit=sysvinit
salt ‘*’ service.get_disabled
salt ‘*’ service.get_disabled limit=upstart
salt ‘*’ service.get_disabled limit=sysvinit
salt ‘*’ service.get_enabled
salt ‘*’ service.get_enabled limit=upstart
salt ‘*’ service.get_enabled limit=sysvinit
salt ‘*’ service.missing sshd
salt ‘*’ service.missing sshd limit=upstart
salt ‘*’ service.missing sshd limit=sysvinit
salt ‘*’ service.reload <service name>
salt ‘*’ service.restart <service name>
salt ‘*’ service.start <service name>
salt ‘*’ service.status <service name>
salt ‘*’ service.stop <service name>
salt ‘*’ shadow.default_hash
salt ‘*’ shadow.del_password username
salt ‘*’ shadow.gen_password ‘I_am_password’
salt ‘*’ shadow.gen_password ‘I_am_password’ crypt_salt’I_am_salt’ algorithm=sha256
salt ‘*’ shadow.info root
salt ‘*’ shadow.set_date username 0
salt ‘*’ shadow.set_expire username -1
salt ‘*’ shadow.set_inactdays username 7
salt ‘*’ shadow.set_maxdays username 90
salt ‘*’ shadow.set_mindays username 7
salt ‘*’ shadow.set_password root ‘$1$UYCIxa628.9qXjpQCjM4a..’
salt ‘*’ shadow.set_warndays username 7
salt ‘*’ sqlite3.fetch /root/test.db ‘SELECT * FROM test;’
salt ‘*’ sqlite3.indexes /root/test.db
salt ‘*’ sqlite3.indices /root/test.db
salt ‘*’ sqlite3.modify /root/test.db ‘CREATE TABLE test(id INT, testdata TEXT);’
salt ‘*’ sqlite3.sqlite_version
salt ‘*’ sqlite3.tables /root/test.db
salt ‘*’ sqlite3.version
salt ‘*’ ssh.auth_keys root
salt ‘*’ ssh.check_key <user> <key> <enc> <comment> <options>
salt ‘*’ root salt://ssh/keyfile
salt ‘*’ ssh.check_known_host <user> <hostname> key=’AAAA…FAaQ==’
salt ‘*’ ssh.get_known_host <user> <hostname>
salt ‘*’ ssh.hash_known_hosts
salt ‘*’ ssh.host_keys
salt ‘*’ ssh.recv_known_host <hostname> enc=<enc> port=<port>
salt ‘*’ ssh.rm_auth_key <user> <key>
salt ‘*’ ssh.rm_known_host <user> <hostname>
salt ‘*’ ssh.set_auth_key <user> ‘<key>’ enc=’dsa’
salt ‘*’ ssh.set_auth_key_from_file <user> salt://ssh_keys/<user>.id_rsa.pub
salt ‘*’ ssh.set_known_host <user> fingerprint=’xx:xx:..:xx’ enc=’ssh-rsa’ config=’.ssh/known_hosts’
salt ‘*’ ssh.user_keys
salt ‘*’ ssh.user_keys user=user1
salt ‘*’ ssh.user_keys user=user1 pubfile=/home/user1/.ssh/id_rsa.pub prvfile=/home/user1/.ssh/id_rsa
salt ‘*’ ssh.user_keys user=”[‘user1′,’user2′] pubfile=id_rsa.pub prvfile=id_rsa
salt ‘*’ state.clear_cache
salt ‘*’ state.high ‘{“vim”: {“pkg”: [“installed”]}}’
salt ‘*’ state.highstate
salt ‘*’ state.highstate whitelist=sls1_to_run,sls2_to_run
salt ‘*’ state.highstate exclude=sls_to_exclude
salt ‘*’ state.highstate exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ state.highstate pillar=”{foo: ‘Foo!’, bar: ‘Bar!’}”
salt ‘*’ state.low ‘{“state”: “pkg”, “fun”: “installed”, “name”: “vi”}’
salt ‘*’ state.pkg /tmp/state_pkg.tgz
salt ‘*’ state.running
salt ‘*’ state.show_highstate
salt ‘*’ state.show_low_sls foo
salt ‘*’ state.show_lowstate
salt ‘*’ state.show_sls core,edit.vim dev
salt ‘*’ state.show_top
salt ‘*’ state.single pkg.installed name=vim
salt ‘*’ state.sls core,edit.vim dev
salt ‘*’ state.sls core exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ state.sls myslsfile pillar=”{foo: ‘Foo!’, bar: ‘Bar!’}”
salt ‘*’ state.sls_id apache http
salt ‘*’ state.template ‘<Path to template on the minion>’
salt ‘*’ state.template_str ‘<Template String>’
salt ‘*’ state.top reverse_top.sls
salt ‘*’ state.top reverse_top.sls exclude=sls_to_exclude
salt ‘*’ state.top reverse_top.sls exclude=”[{‘id': ‘id_to_exclude’}, {‘sls': ‘sls_to_exclude’}]”
salt ‘*’ status.all_status
salt ‘*’ status.cpuinfo
salt ‘*’ status.cpustats
salt ‘*’ status.custom
salt ‘*’ status.diskstats
salt ‘*’ status.diskusage [paths and/or filesystem types]
salt ‘*’ status.diskusage # usage for all filesystems
salt ‘*’ status.diskusage / /tmp # usage for / and /tmp
salt ‘*’ status.diskusage ext? # usage for ext[234] filesystems
salt ‘*’ status.diskusage / ext? # usage for / and all ext filesystems
salt ‘*’ status.loadavg
salt ‘*’ status.master
salt ‘*’ status.meminfo
salt ‘*’ status.netdev
salt ‘*’ status.netstats
salt ‘*’ status.nproc
salt ‘*’ status.pid <sig>
salt ‘*’ status.procs
salt ‘*’ status.uptime
salt ‘*’ status.version
salt ‘*’ status.vmstats
salt ‘*’ status.w
salt ‘*’ supervisord.add <name>
salt ‘*’ supervisord.custom “mstop ‘*gunicorn*'”
salt ‘*’ supervisord.options foo
salt ‘*’ supervisord.remove <name>
salt ‘*’ supervisord.reread
salt ‘*’ supervisord.restart <service>
salt ‘*’ supervisord.restart <group>:
salt ‘*’ supervisord.start <service>
salt ‘*’ supervisord.start <group>:
salt ‘*’ supervisord.status
salt ‘*’ supervisord.status_raw
salt ‘*’ supervisord.stop <service>
salt ‘*’ supervisord.stop <group>:
salt ‘*’ supervisord.update
salt ‘*’ sys.argspec pkg.install
salt ‘*’ sys.argspec sys
salt ‘*’ sys.argspec
salt ‘*’ sys.doc
salt ‘*’ sys.doc sys
salt ‘*’ sys.doc sys.doc
salt ‘*’ sys.doc network.traceroute user.info
salt ‘*’ sys.list_functions
salt ‘*’ sys.list_functions sys
salt ‘*’ sys.list_functions sys user
salt ‘*’ sys.list_modules
salt ‘*’ sys.list_returner_functions
salt ‘*’ sys.list_returner_functions mysql
salt ‘*’ sys.list_returner_functions mysql etcd
salt ‘*’ sys.list_returners
salt ‘*’ sys.list_runner_functions
salt ‘*’ sys.list_runner_functions state
salt ‘*’ sys.list_runner_functions state virt
salt ‘*’ sys.list_runners
salt ‘*’ sys.list_state_functions
salt ‘*’ sys.list_state_functions file
salt ‘*’ sys.list_state_functions pkg user
salt ‘*’ sys.list_state_modules
salt ‘*’ sys.reload_modules
salt ‘*’ sys.returner_doc
salt ‘*’ sys.returner_doc sqlite3
salt ‘*’ sys.returner_doc sqlite3.get_fun
salt ‘*’ sys.returner_doc sqlite3.get_fun etcd.get_fun
salt ‘*’ sys.runner_doc
salt ‘*’ sys.runner_doc cache
salt ‘*’ sys.runner_doc cache.grains
salt ‘*’ sys.runner_doc cache.grains mine.get
salt ‘*’ sys.state_doc
salt ‘*’ sys.state_doc service
salt ‘*’ sys.state_doc service.running
salt ‘*’ sys.state_doc service.running ipables.append
salt ‘*’ sysctl.assign net.ipv4.ip_forward 1
salt ‘*’ sysctl.get net.ipv4.ip_forward
salt ‘*’ sysctl.persist net.ipv4.ip_forward 1
salt ‘*’ sysctl.show
salt ‘*’ system.halt
salt ‘*’ system.init 3
salt ‘*’ system.poweroff
salt ‘*’ system.reboot
salt ‘*’ system.shutdown
salt ‘*’ test.arg 1 “two” 3.1 txt=”hello” wow='{a: 1, b: “hello”}’
salt ‘*’ test.arg_repr 1 “two” 3.1 txt=”hello” wow='{a: 1, b: “hello”}’
salt ‘*’ test.arg_type 1 ‘int’
salt ‘*’ test.collatz 3
salt ‘*’ test.conf_test
salt ‘*’ test.cross_test file.gid_to_group 0
salt ‘*’ test.echo ‘foo bar baz quo qux’
salt ‘*’ test.exception ‘Oh noes!’
salt ‘*’ test.fib 3
salt ‘*’ test.get_opts
salt ‘*’ test.kwarg num=1 txt=”two” env='{a: 1, b: “hello”}’
salt ‘*’ test.not_loaded
salt ‘*’ test.opts_pkg
salt ‘*’ test.outputter foobar
salt ‘*’ test.ping
salt ‘*’ test.provider service
salt ‘*’ test.providers
salt ‘*’ test.rand_sleep 60
salt ‘*’ test.rand_str
salt ‘*’ test.retcode 42
salt ‘*’ test.sleep 20
salt ‘*’ test.stack
salt ‘*’ test.tty tty0 ‘This is a test’
salt ‘*’ test.tty pts3 ‘This is a test’
salt ‘*’ test.version
salt ‘*’ test.versions_information
salt ‘*’ test.versions_report
salt ‘*’ timezone.get_hwclock
salt ‘*’ timezone.get_offset
salt ‘*’ timezone.get_zone
salt ‘*’ timezone.get_zonecode
salt ‘*’ timezone.set_hwclock UTC
salt ‘*’ timezone.set_zone ‘America/Denver’
salt ‘*’ timezone.zone_compare ‘America/Denver’
salt ‘*’ user.add name <uid> <gid> <groups> <home> <shell>
salt ‘*’ user.chfullname foo “Foo Bar”
salt ‘*’ user.chgid foo 4376
salt ‘*’ user.chgroups foo wheel,root True
salt ‘*’ user.chhome foo /home/users/foo True
salt ‘*’ user.chhomephone foo “7735551234”
salt ‘*’ user.chroomnumber foo 123
salt ‘*’ user.chshell foo /bin/zsh
salt ‘*’ user.chuid foo 4376
salt ‘*’ user.chworkphone foo “7735550123”
salt ‘*’ user.delete name remove=True force=True
salt ‘*’ user.getent
salt ‘*’ user.info root
salt ‘*’ user.list_groups foo
salt ‘*’ user.list_users
salt ‘*’ virtualenv.create /path/to/new/virtualenv
salt ‘*’ virtualenv.get_site_packages /path/to/my/venv
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpassword
salt ‘*’ webutil.useradd /etc/httpd/htpasswd larry badpass opts=ns
salt ‘*’ webutil.userdel /etc/httpd/htpasswd larry
