大家好，又见面了，我是你们的朋友全栈君。
第一步：查看你的计算机是否安装了严密的防火墙，当你开始运行编写的网络程序时他都会发出警告并且禁止你的程序连接网络你要对防火墙进行配置，让他允许你的程序或者直接关闭防火墙(慎重考虑)如下图
直接关闭防火墙
或者对防火墙进行设置(只要选中这两个勾，在你执行的时候会提示你是否允许XXX连接网络)
第二步：因为有些代码里面可能需要根据主机名称来去本地的DNS里找对应的IP地址，由于本地的DNS配置中没有指定主机名这个IP地址是什么，也就会提示无法连接或者连接超时，打开终端输入命令cat /private/etc/hosts，如下图：
然后编辑主机配置，增加主机名的映射，输入命令sudo vi /private/etc/hosts，进入VI编辑器(i进入编辑模式)，写如下代码：
如果出现下图的状况回车就可以了
和你当前网络的IP(因为有的人可能连接的别的设备等) 你的主机名称
摁Esc然后输入:wq!退出VI编辑器并且保存
然后输入刷新命令dscacheutil -flushcache
这样问题就解决了，希望对大家有所帮助
=======================================
下面是我在网上找的错误表
errno0 : Success
errno1 : Operation not permitted
errno2 : No such file or directory
errno3 : No such process
errno4 : Interrupted system call
errno5 : Input/output error
errno6 : No such device or address
errno7 : Argument list too long
errno8 : Exec format error
errno9 : Bad file descriptor
errno10 : No child processes
errno11 : Resource temporarily unavailable
errno12 : Cannot allocate memory
errno13 : Permission denied
errno14 : Bad address
errno15 : Block device required
errno16 : Device or resource busy
errno17 : File exists
errno18 : Invalid cross-device link
errno19 : No such device
errno20 : Not a directory
errno21 : Is a directory
errno22 : Invalid argument
errno23 : Too many open files in system
errno24 : Too many open files
errno25 : Inappropriate ioctl for device
errno26 : Text file busy
errno27 : File too large
errno28 : No space left on device
errno29 : Illegal seek
errno30 : Read-only file system
errno31 : Too many links
errno32 : Broken pipe
errno33 : Numerical argument out of domain
errno34 : Numerical result out of range
errno35 : Resource deadlock avoided
errno36 : File name too long
errno37 : No locks available
errno38 : Function not implemented
errno39 : Directory not empty
errno40 : Too many levels of symbolic links
errno41 : Unknown error 41
errno42 : No message of desired type
errno43 : Identifier removed
errno44 : Channel number out of range
errno45 : Level 2 not synchronized
errno46 : Level 3 halted
errno47 : Level 3 reset
errno48 : Link number out of range
errno49 : Protocol driver not attached
errno50 : No CSI structure available
errno51 : Level 2 halted
errno52 : Invalid exchange
errno53 : Invalid request descriptor
errno54 : Exchange full
errno55 : No anode
errno56 : Invalid request code
errno57 : Invalid slot
errno58 : Unknown error 58
errno59 : Bad font file format
errno60 : Device not a stream
errno61 : No data available
errno62 : Timer expired
errno63 : Out of streams resources
errno64 : Machine is not on the network
errno65 : Package not installed
errno66 : Object is remote
errno67 : Link has been severed
errno68 : Advertise error
errno69 : Srmount error
errno70 : Communication error on send
errno71 : Protocol error
errno72 : Multihop attempted
errno73 : RFS specific error
errno74 : Bad message
errno75 : Value too large for defined datatype
errno76 : Name not unique on network
errno77 : File descriptor in bad state
errno78 : Remote address changed
errno79 : Can not access a needed sharedlibrary
errno80 : Accessing a corrupted sharedlibrary
errno81 : .lib section in a.out corrupted
errno82 : Attempting to link in too manyshared libraries
errno83 : Cannot exec a shared librarydirectly
errno84 : Invalid or incomplete multibyte orwide character
errno85 : Interrupted system call should berestarted
errno86 : Streams pipe error
errno87 : Too many users
errno88 : Socket operation on non-socket
errno89 : Destinationaddress required
errno90 : Message too long
errno91 : Protocol wrong type for socket
errno92 : Protocol not available
errno93 : Protocol not supported
errno94 : Socket type not supported
errno95 : Operation not supported
errno96 : Protocol family not supported
errno97 : Address family not supported byprotocol
errno98 : Address already in use
errno99 : Cannot assign requested address
errno100 : Network is down
errno101 : Network is unreachable
errno102 : Network dropped connection onreset
errno103 : Software caused connection abort
errno104 : Connection reset by peer
errno105 : No buffer space available
errno106 : Transport endpoint is alreadyconnected
errno107 : Transport endpoint is notconnected
errno108 : Cannot send after transportendpoint shutdown
errno109 : Too many references: cannot splice
errno110 : Connection timed out
errno111 : Connection refused
errno112 : Host is down
errno113 : No route to host
errno114 : Operation already in progress
errno115 : Operation now in progress
errno116 : Stale NFS file handle
errno117 : Structure needs cleaning
errno118 : Not a XENIX named type file
errno119 : No XENIX semaphores available
errno120 : Is a named type file
errno121 : Remote I/O error
errno122 : Disk quota exceeded
errno123 : No medium found
errno124 : Wrong medium type
errno125 : Operation canceled
errno126 : Required key not available
errno127 : Key has expired
errno128 : Key has been revoked
errno129 : Key was rejected by service
errno130 : Owner died
errno131 : State not recoverable
errno132 : Operation not possible due toRF-kill
errno133 : Unknown error 133
errno134 : Unknown error 134
errno135 : Unknown error 135
errno136 : Unknown error 136
errno137 : Unknown error 137
errno138 : Unknown error 138
errno139 : Unknown error 139
发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/175525.html原文链接：https://javaforall.cn
