前言
今天接触了一个项目，它只能用Apache2，而且最近PHP8.2也推出了来了，所有想着试试就逝世的态度，结果还挺简单的，只能说配置好，后续再深入了解一下。
因此这里把简单的配置方案做一下。
环境
1.Ubuntu
2.Nginx
3.PHP8.1-FPM
步骤
1.安装Apache2
代码语言：shell复制add-apt-repository ppa:ondrej/apache2
apt install apache22.安装PHP8.2-fpm
代码语言：shell复制apt install php8.2-fpm
apt install libapache2-mod-php8.2
安装完提示有错误，正常，因为80端口被nginx占用了。
代码语言：text复制Job for apache2.service failed because the control process exited with error code.
See "systemctl status apache2.service" and "journalctl -xeu apache2.service" for details.
invoke-rc.d: initscript apache2, action "restart" failed.
× apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2022-10-12 10:04:59 CST; 22ms ago
Docs: https://httpd.apache.org/docs/2.4/
Process: 121228 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CPU: 12ms
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: Starting The Apache HTTP Server...
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121231]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121231]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121231]: no listening sockets available, shutting down
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121231]: AH00015: Unable to open logs
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121228]: Action 'start' failed.
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121228]: The Apache error log may have more information.
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: apache2.service: Failed with result 'exit-code'.
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: Failed to start The Apache HTTP Server.
apache2_invoke: Enable module php8.2
Job for apache2.service failed because the control process exited with error code.
See "systemctl status apache2.service" and "journalctl -xeu apache2.service" for details.
invoke-rc.d: initscript apache2, action "restart" failed.
× apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2022-10-12 10:04:59 CST; 6ms ago
Docs: https://httpd.apache.org/docs/2.4/
Process: 121262 ExecStart=/usr/sbin/apachectl start (code=exited, status=1/FAILURE)
CPU: 18ms
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: Starting The Apache HTTP Server...
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121265]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121265]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121265]: no listening sockets available, shutting down
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121265]: AH00015: Unable to open logs
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121262]: Action 'start' failed.
Oct 12 10:04:59 VM-0-7-ubuntu apachectl[121262]: The Apache error log may have more information.
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: apache2.service: Failed with result 'exit-code'.
Oct 12 10:04:59 VM-0-7-ubuntu systemd[1]: Failed to start The Apache HTTP Server.3.修改Apache2端口
代码语言：text复制vim /etc/apache2/ports.conf修改为如下：
代码语言：text复制# If you just change the port or add more ports here, you will likely also
# have to change the VirtualHost statement in
# /etc/apache2/sites-enabled/000-default.conf
Listen 8081
<IfModule ssl_module>
Listen 444
</IfModule>
<IfModule mod_gnutls.c>
Listen 444
</IfModule>
# vim: syntax=apache ts=4 sw=4 sts=4 sr noet同时也要修改VirtualHost配置文件中的端口：
代码语言：text复制vim /etc/apache2/sites-enabled/000-default.conf修改端口：
代码语言：text复制<VirtualHost *:8081>这个时候可以看一下有没有因为端口问题报错。
代码语言：shell复制systemctl restart apache2
systemctl status apache2返回正常：
代码语言：text复制● apache2.service - The Apache HTTP Server
Loaded: loaded (/lib/systemd/system/apache2.service; enabled; vendor preset: enabled)
Active: active (running) since Wed 2022-10-12 10:13:47 CST; 7s ago
Docs: https://httpd.apache.org/docs/2.4/
Process: 124028 ExecStart=/usr/sbin/apachectl start (code=exited, status=0/SUCCESS)
Main PID: 124032 (apache2)
Tasks: 6 (limit: 8788)
Memory: 10.3M
CPU: 42ms
CGroup: /system.slice/apache2.service
├─124032 /usr/sbin/apache2 -k start
├─124033 /usr/sbin/apache2 -k start
├─124034 /usr/sbin/apache2 -k start
├─124035 /usr/sbin/apache2 -k start
├─124036 /usr/sbin/apache2 -k start
└─124037 /usr/sbin/apache2 -k start
Oct 12 10:13:47 VM-0-7-ubuntu systemd[1]: Starting The Apache HTTP Server...
Oct 12 10:13:47 VM-0-7-ubuntu systemd[1]: Started The Apache HTTP Server.4.为apache2启用php-fpm
代码语言：shell复制a2enmod proxy_fcgi setenvif
a2enconf php8.2-fpm5.安装PHP模块
代码语言：shell复制apt install php8.2-*重启apache2
代码语言：shell复制systemctl restart apache26.测试
到这边就可以试着用 {http://IP:8081} 进行访问了。
vim /var/www/html/index.php输入：
代码语言：php复制<?php echo phpinfo();?>保存退出。
编辑nginx的配置文件：
代码语言：text复制server {
listen 80;
index index.html index.htm index.nginx-debian.html index.php;
server_name test.xxx.com;
location / {
proxy_pass_header Server;
proxy_pass http://127.0.0.1:8081;
proxy_set_header Host $http_host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Scheme $scheme;
proxy_redirect off;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
}
access_log /var/log/nginx/test.xxx.com-access.log;
error_log /var/log/nginx/test.xxx.com-error.log;
}重启nginx
代码语言：shell复制systemctl restart nginx输入网址就能访问了。
总结
Nginx与Apache2各有优缺点，具体还是要看需求。我查了下资料，Apache2和Nginx共存使其各司其职，没有想象中的那么完美，有一篇文章的结论是{Nginx PHP-FPM} > {Apache2 Nginx PHP-FPM}。以后有空验证一下吧。
