安装etcd集群

2022-07-24 11:49:43 浏览数 (1)

kuberntes 系统使用 etcd 存储所有数据，是最重要的组件之一，注意 etcd集群只能有奇数个节点(1,3,5...)，本文档使用3个节点做集群。

一、基础环境

软件包

etcd下载地址：https://github.com/coreos/etcd/releases

服务器
架构图

二、生成etcd证书与私钥

创建etcd配置文件
代码语言：javascript复制
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "192.168.1.11",
    "192.168.1.12",
    "192.168.1.13",
    "etcd1",
    "etcd2",
    "etcd3"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "Ctyun",
      "OU": "ops"
    }
  ]
}

hosts：定授权使用该证书的 etcd 节点 IP(应包含集群内所有节点的IP与hostname) C：国家 ST：省份 L：城市 O：公司 OU：部门

生成私钥、证书请求文件、证书

CA证书在前面的章节创建 Kubernetes证书相关(CFSSL)

代码语言：javascript复制
cfssl gencert -ca=/opt/ssl/k8sca/ca.pem 
-ca-key=/opt/ssl/k8sca/ca-key.pem 
-config=/opt/ssl/k8sca/ca-config.json 
-profile=kubernetes /opt/ssl/etcd/etcd-csr.json | cfssljson -bare etcd

-ca：指定CA证书路径 -ca-key：指定CAKey的路径 -config：指定CA证书签署策略配置文件

二、启动和配置etcd

创建etcd配置文件etcd.conf，此配置文件是定义一些变量，方便etcd.service文件中直接引用、方便后期维护。 配置文件的所有含义都在创建etcd.service配置文件后有详解。

代码语言：javascript复制
mkdir -p /etc/etcd
vim /etc/etcd/etcd.conf
# [member]
ETCD_NAME=etcd1
ETCD_DATA_DIR="/var/lib/etcd"
ETCD_LISTEN_PEER_URLS="https://192.168.1.11:2380" 
ETCD_LISTEN_CLIENT_URLS="https://192.168.1.11:2379"
#[cluster]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.1.11:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_ADVERTISE_CLIENT_URLS="https://192.168.1.11:2379"
创建etcd.service配置文件

etcd.service的变量都是引用etcd配置文件中

代码语言：javascript复制
mkdir /var/lib/etcd
vim /usr/lib/systemd/system/etcd.service 
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=${ETCD_DATA_DIR} 
EnvironmentFile=/etc/etcd/etcd.conf
ExecStart=/usr/local/bin/etcd 
  --name=etcd1 
  --cert-file=/opt/ssl/etcd/etcd.pem 
  --key-file=/opt/ssl/etcd/etcd-key.pem 
  --peer-cert-file=/opt/ssl/etcd/etcd.pem 
  --peer-key-file=/opt/ssl/etcd/etcd-key.pem 
  --trusted-ca-file=/opt/ssl/k8sca/ca.pem 
  --peer-trusted-ca-file=/opt/ssl/k8sca/ca.pem 
  --initial-advertise-peer-urls=${ETCD_INITIAL_ADVERTISE_PEER_URLS} 
  --listen-peer-urls=${ETCD_LISTEN_PEER_URLS} 
  --listen-client-urls=${ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 
  --advertise-client-urls=${ETCD_ADVERTISE_CLIENT_URLS} 
  --initial-cluster-token=${ETCD_INITIAL_CLUSTER_TOKEN} 
  --initial-cluster etcd1=https://192.168.1.11:2380,etcd2=https://192.168.1.12:2380,etcd3=https://192.168.1.13:2380 
  --initial-cluster-state=new 
  --data-dir=/var/lib/etcd
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

--initial-cluster：集群当中的其他节点 --cert-file：etcd证书路径 --key-file：etcd私钥路径 --peer-cert-file：对等证书(双向证书)路径 --peer-key-file：对等证书(双向证书)私钥路径 --trusted-ca-file：作为客户端时的CA证书路径 --peer-trusted-ca-file：对等证书的CA证书路径 --initial-advertise-peer-urls：列出集群成员通信的URL，用于通告集群其他成员 --listen-peer-urls：用于监听集群其他成员的URL列表 --listen-client-urls：用于监听客户端通讯的URL列表 --advertise-client-urls：通告客户端的URL，用于列出所有客户端 --initial-cluster-token：etcd集群的初始集群令牌，服务器必须通过令牌才能加入etcd集群

启动etcd集群

集群所有节点都配置好配置文件，同时启动。

代码语言：javascript复制
systemctl daemon-reload && systemctl enable etcd && systemctl start etcd
不使用变量的配置方法

前面分别创建了/etc/etcd/etcd.conf与/var/lib/systemd/system/etcd.service两个配置文件，且etcd.service引用了etcd.conf重定义的变量。

如若不想引用变量，可以不写etcd.conf。仅创建etcd.service如下

代码语言：javascript复制
[root@etcd1 k8sca]# cat /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=/var/lib/etcd/
ExecStart=/usr/local/bin/etcd 
  --name etcd1 
  --cert-file=/opt/ssl/etcd/etcd.pem 
  --key-file=/opt/ssl/etcd/etcd-key.pem 
  --peer-cert-file=/opt/ssl/etcd/etcd.pem 
  --peer-key-file=/opt/ssl/etcd/etcd-key.pem 
  --trusted-ca-file=/opt/ssl/k8sca/ca.pem 
  --peer-trusted-ca-file=/opt/ssl/k8sca/ca.pem 
  --initial-advertise-peer-urls=https://192.168.1.11:2380 
  --listen-peer-urls=https://192.168.1.11:2380 
  --listen-client-urls=https://192.168.1.11:2379,http://127.0.0.1:2379 
  --advertise-client-urls=https://192.168.1.11:2379 
  --initial-cluster-token=etcd-cluster-0 
  --initial-cluster etcd1=https://192.168.1.11:2380,etcd2=https://192.168.1.12:2380,etcd3=https://192.168.1.13:2380 
  --initial-cluster-state=new 
  --data-dir=/var/lib/etcd
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target

三、测试集群状态

集群中所有主机配置均一致，仅IP地址不同。

代码语言：javascript复制
$ etcdctl --ca-file=/opt/ssl/k8sca/ca.pem --cert-file=/opt/ssl/etcd/etcd.pem --key-file=/opt/ssl/etcd/etcd-key.pem cluster-health
member aa869cb0f2e7ed31 is healthy: got healthy result from https://192.168.1.11:2379
member b08a644fd7247c5e is healthy: got healthy result from https://192.168.1.13:2379
member bb9bd2baaebf7d95 is healthy: got healthy result from https://192.168.1.12:2379

常见问题

  • publish error: etcdserver: request timed out 我部署时先使用一台进行测试，无论如何启动etcd都无法启动，提示publish error: etcdserver: request timed out。后来发现etcd.service中制定了其他etcd主机，所以当单独启动一台是连接其他主机不通，那么etcd就启动失败。所以要把etcd集群中所有主机都配置好，同时启动就OK了。
etcd https 数据分析 php 编程算法

0 人点赞