设备
- ESP8266继电器
- ESP8266固件烧录器
- ESP-01S 如图
软件
- Thonny
- AiThinker_Serial_Tool_V1.2.3
- flash_download_tools_v3.6.8
- esp8266-20190529-v1.11.bin
概要
经历了很长很长很长很长的时间，跳过了各种坑，终于，在居家隔离的日子里，把这个项目搞定了 首先呢，淘宝购买了设备，先用 Raspberry pi RP 连接ESP01S、控制继电器，联网，控制电器，发现硬件多、预算高，然后就更换成了ESP8266继电器。刷了很长很长时间的固件，发现只能成功刷入原厂AT，micropython刷不进去，或者刷进去启动乱码，毕竟咱们AT语句不熟，最后，搁置了一段时间，成功刷入micropython
- 刷固件
下载软件flash_download_tools_v3.6.8，好像百度一大堆，大同小异，然后选择固件
esp8266-20190529-v1.11.bin，输入开始位置0x00000，清除ERASE，然后开始刷入START，
刷入成功之后，使用AiThinker_Serial_Tool_V1.2.3连接，你会看到一堆乱码，然后是熟悉的python命令行
然后编写boot.py文件，
import network
import time
from machine import Pin
from umqtt.simple import MQTTClient
import usocket as socket
status = 'run'
server = "192.168.0.10"
port = 1883
ClientId = "0"
TOPIC = b"iot_eps32_001"
username = 'iot'
password = 'passwd'
# 继电器
g0 = Pin(0, Pin.OUT, value=0)
# 指示灯
g2 = Pin(2, Pin.OUT, value=0)
client = None
print("clientid:", ClientId, "n", "Broker:", server, "n", "User Name:", username, "n", "Password:", password, "n")
def do_connect():
sta_if = network.WLAN(network.STA_IF)
ap_if = network.WLAN(network.AP_IF)
if ap_if.active():
ap_if.active(False)
if not sta_if.isconnected():
print('connecting to network...')
sta_if.active(True)
sta_if.connect('wifissid', 'wifipasswd') # wifi的SSID和密码
while not sta_if.isconnected():
pass
print('network config:', sta_if.ifconfig())
return
def sub_cb(topic, msg):
global client, status
topic = topic.decode('utf-8')
msg = msg.decode('utf-8')
print(topic, ':', msg)
if topic == 'iot_eps32_001':
if msg == 'close':
status = 'close'
# client.disconnect()
return
elif msg == 'test':
g2.on()
time.sleep(1)
g2.off()
time.sleep(2)
g2.on()
time.sleep(1)
g2.off()
time.sleep(2)
g2.on()
elif msg == 'on':
g0.on()
elif msg == 'off':
g0.off()
pass
return
def connect():
global client
client = MQTTClient(client_id=ClientId, server=server, port=port, user=username, password=password, keepalive=60)
# please make sure keepalive value is not 0
client.set_callback(sub_cb)
client.connect()
print(client, status)
client.subscribe(TOPIC)
print("Connected to %s, subscribed to %s topic" % (server, TOPIC))
while status == 'run':
client.wait_msg()
time.sleep(0.01)
pass
client.disconnect()
return
if __name__ == '__main__':
do_connect()
connect()修改你的mqtt服务器账户密码，WIFI账户密码，就可以使用了
