大家好，又见面了，我是你们的朋友全栈君。
Hostapd的功能就是作为AP的认证服务器，负责控制管理stations(通常可以认为带无线网卡的PC)的接入和认证。 通过Hostapd可以将无线网卡切换为AP/Master模式，通过修改配置文件，可以建立一个开放式的(不加密)的，WEP，WPA或WPA2的无线网络。并且通过修改配置文件可以设置无线网卡的各种参数，包括频率，信号，beacon包时间间隔，是否发送beacon包，如果响应探针请求等等。还可以设置mac地址过滤条件等。
hostapd的main函数
代码语言：javascript复制int main(int argc, char *argv[])
{
struct hapd_interfaces interfaces;
int ret = 1;
size_t i, j;
int c, debug = 0, daemonize = 0;
char *pid_file = NULL;
const char *log_file = NULL;
const char *entropy_file = NULL;
char **bss_config = NULL, **tmp_bss;
size_t num_bss_configs = 0;
#ifdef CONFIG_DEBUG_LINUX_TRACING
int enable_trace_dbg = 0;
#endif /* CONFIG_DEBUG_LINUX_TRACING */
int start_ifaces_in_sync = 0;
char **if_names = NULL;
size_t if_names_size = 0;
if (os_program_init())
return -1;
os_memset(&interfaces, 0, sizeof(interfaces));
interfaces.reload_config = hostapd_reload_config;
interfaces.config_read_cb = hostapd_config_read;
interfaces.for_each_interface = hostapd_for_each_interface;
interfaces.ctrl_iface_init = hostapd_ctrl_iface_init;
interfaces.ctrl_iface_deinit = hostapd_ctrl_iface_deinit;
interfaces.driver_init = hostapd_driver_init;
interfaces.global_iface_path = NULL;
interfaces.global_iface_name = NULL;
interfaces.global_ctrl_sock = -1;
dl_list_init(&interfaces.global_ctrl_dst);
for (;;) {
c = getopt(argc, argv, "b:Bde:f:hi:KP:STtu:vg:G:");
if (c < 0)
break;
switch (c) {
case 'h':
usage();
break;
case 'd':
debug ;
if (wpa_debug_level > 0)
wpa_debug_level--;
break;
case 'B':
daemonize ;
break;
case 'e':
entropy_file = optarg;
break;
case 'f':
log_file = optarg;
break;
case 'K':
wpa_debug_show_keys ;
break;
case 'P':
os_free(pid_file);
pid_file = os_rel2abs_path(optarg);
break;
case 't':
wpa_debug_timestamp ;
break;
#ifdef CONFIG_DEBUG_LINUX_TRACING
case 'T':
enable_trace_dbg = 1;
break;
#endif /* CONFIG_DEBUG_LINUX_TRACING */
case 'v':
show_version();
exit(1);
break;
case 'g':
if (hostapd_get_global_ctrl_iface(&interfaces, optarg))
return -1;
break;
case 'G':
if (hostapd_get_ctrl_iface_group(&interfaces, optarg))
return -1;
break;
case 'b':
tmp_bss = os_realloc_array(bss_config,
num_bss_configs 1,
sizeof(char *));
if (tmp_bss == NULL)
goto out;
bss_config = tmp_bss;
bss_config[num_bss_configs ] = optarg;
break;
case 'S':
start_ifaces_in_sync = 1;
break;
#ifdef CONFIG_WPS
case 'u':
return gen_uuid(optarg);
#endif /* CONFIG_WPS */
case 'i':
if (hostapd_get_interface_names(&if_names,
&if_names_size, optarg))
goto out;
break;
default:
usage();
break;
}
}
if (optind == argc && interfaces.global_iface_path == NULL &&
num_bss_configs == 0)
usage();
wpa_msg_register_ifname_cb(hostapd_msg_ifname_cb);
if (log_file)
wpa_debug_open_file(log_file);
else
wpa_debug_setup_stdout();
#ifdef CONFIG_DEBUG_LINUX_TRACING
if (enable_trace_dbg) {
int tret = wpa_debug_open_linux_tracing();
if (tret) {
wpa_printf(MSG_ERROR, "Failed to enable trace logging");
return -1;
}
}
#endif /* CONFIG_DEBUG_LINUX_TRACING */
interfaces.count = argc - optind;
if (interfaces.count || num_bss_configs) {
interfaces.iface = os_calloc(interfaces.count num_bss_configs,
sizeof(struct hostapd_iface *));
if (interfaces.iface == NULL) {
wpa_printf(MSG_ERROR, "malloc failed");
return -1;
}
}
if (hostapd_global_init(&interfaces, entropy_file)) {
wpa_printf(MSG_ERROR, "Failed to initialize global context");
return -1;
}
eloop_register_timeout(HOSTAPD_CLEANUP_INTERVAL, 0,
hostapd_periodic, &interfaces, NULL);
if (fst_global_init()) {
wpa_printf(MSG_ERROR,
"Failed to initialize global FST context");
goto out;
}
#if defined(CONFIG_FST) && defined(CONFIG_CTRL_IFACE)
if (!fst_global_add_ctrl(fst_ctrl_cli))
wpa_printf(MSG_WARNING, "Failed to add CLI FST ctrl");
#endif /* CONFIG_FST && CONFIG_CTRL_IFACE */
/* Allocate and parse configuration for full interface files */
for (i = 0; i < interfaces.count; i ) {
char *if_name = NULL;
if (i < if_names_size)
if_name = if_names[i];
interfaces.iface[i] = hostapd_interface_init(&interfaces,
if_name,
argv[optind i],
debug);
if (!interfaces.iface[i]) {
wpa_printf(MSG_ERROR, "Failed to initialize interface");
goto out;
}
if (start_ifaces_in_sync)
interfaces.iface[i]->need_to_start_in_sync = 1;
}
/* Allocate and parse configuration for per-BSS files */
for (i = 0; i < num_bss_configs; i ) {
struct hostapd_iface *iface;
char *fname;
wpa_printf(MSG_INFO, "BSS config: %s", bss_config[i]);
fname = os_strchr(bss_config[i], ':');
if (fname == NULL) {
wpa_printf(MSG_ERROR,
"Invalid BSS config identifier '%s'",
bss_config[i]);
goto out;
}
*fname = ' ';
iface = hostapd_interface_init_bss(&interfaces, bss_config[i],
fname, debug);
if (iface == NULL)
goto out;
for (j = 0; j < interfaces.count; j ) {
if (interfaces.iface[j] == iface)
break;
}
if (j == interfaces.count) {
struct hostapd_iface **tmp;
tmp = os_realloc_array(interfaces.iface,
interfaces.count 1,
sizeof(struct hostapd_iface *));
if (tmp == NULL) {
hostapd_interface_deinit_free(iface);
goto out;
}
interfaces.iface = tmp;
interfaces.iface[interfaces.count ] = iface;
}
}
/* * Enable configured interfaces. Depending on channel configuration, * this may complete full initialization before returning or use a * callback mechanism to complete setup in case of operations like HT * co-ex scans, ACS, or DFS are needed to determine channel parameters. * In such case, the interface will be enabled from eloop context within * hostapd_global_run(). */
interfaces.terminate_on_error = interfaces.count;
for (i = 0; i < interfaces.count; i ) {
//根据配置文件设置iface信息
if (hostapd_driver_init(interfaces.iface[i]) ||
hostapd_setup_interface(interfaces.iface[i])) //将配置文件通过写入驱动
goto out;
}
hostapd_global_ctrl_iface_init(&interfaces);
if (hostapd_global_run(&interfaces, daemonize, pid_file)) {
wpa_printf(MSG_ERROR, "Failed to start eloop");
goto out;
}
ret = 0;
out:
hostapd_global_ctrl_iface_deinit(&interfaces);
/* Deinitialize all interfaces */
for (i = 0; i < interfaces.count; i ) {
if (!interfaces.iface[i])
continue;
interfaces.iface[i]->driver_ap_teardown =
!!(interfaces.iface[i]->drv_flags &
WPA_DRIVER_FLAGS_AP_TEARDOWN_SUPPORT);
hostapd_interface_deinit_free(interfaces.iface[i]);
}
os_free(interfaces.iface);
if (interfaces.eloop_initialized)
eloop_cancel_timeout(hostapd_periodic, &interfaces, NULL);
hostapd_global_deinit(pid_file, interfaces.eloop_initialized);
os_free(pid_file);
if (log_file)
wpa_debug_close_file();
wpa_debug_close_linux_tracing();
os_free(bss_config);
for (i = 0; i < if_names_size; i )
os_free(if_names[i]);
os_free(if_names);
fst_global_deinit();
os_program_deinit();
return ret;
}该函数主要分为三部分：
第一部是读取命令行参数作相应的处理。
第二部分主要是根据配置文件设置hapd_interface的参数然后通过一系列的函数调用进入内核态设置相应的内核参数
第三部分是在函数hostapd_global_run中死循环来检测socket或者timeout或者event的相关量是否发生变化进而调用相应的提前注册到该事件上的函数。
在函数hostapd_global_init 中初始化eloop这个全局变量并进入eloop死循环中：
static int hostapd_global_init(struct hapd_interfaces *interfaces, const char *entropy_file) { int i; os_memset(&global, 0, sizeof(global)); //重置global变量 hostapd_logger_register_cb(hostapd_logger_cb); if (eap_server_register_methods()) { //注册eap server的加密方法 wpa_printf(MSG_ERROR, "Failed to register EAP methods"); return -1; } if (eloop_init()) { wpa_printf(MSG_ERROR, "Failed to initialize event loop"); return -1; } interfaces->eloop_initialized = 1; random_init(entropy_file); #ifndef CONFIG_NATIVE_WINDOWS eloop_register_signal(SIGHUP, handle_reload, interfaces); eloop_register_signal(SIGUSR1, handle_dump_state, interfaces); #endif /* CONFIG_NATIVE_WINDOWS */ eloop_register_signal_terminate(handle_term, interfaces); #ifndef CONFIG_NATIVE_WINDOWS openlog("hostapd", 0, LOG_DAEMON); #endif /* CONFIG_NATIVE_WINDOWS */ for (i = 0; wpa_drivers[i]; i ) global.drv_count ; if (global.drv_count == 0) { wpa_printf(MSG_ERROR, "No drivers enabled"); return -1; } global.drv_priv = os_calloc(global.drv_count, sizeof(void *)); if (global.drv_priv == NULL) return -1; return 0; }使用eap_server_register_methods函数注册eap server支持的安全模式，并存放在一个链表里面。
调用 eloop_init 函数初始化全局变量eloop结构体。
调用 random_init对各个事件注册，
void random_init(const char *entropy_file) { os_free(random_entropy_file); if (entropy_file) random_entropy_file = os_strdup(entropy_file); else random_entropy_file = NULL; random_read_entropy(); #ifdef __linux__ if (random_fd >= 0) return; random_fd = open("/dev/random", O_RDONLY | O_NONBLOCK); if (random_fd < 0) { wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s", strerror(errno)); return; } wpa_printf(MSG_DEBUG, "random: Trying to read entropy from " "/dev/random"); eloop_register_read_sock(random_fd, random_read_fd, NULL, NULL); #endif /* __linux__ */ random_write_entropy(); }eloop_register_read_sock 函数继续调用，eloop_register_read_sock，再使用eloop_register_sock 函数来实现注册socket。
int eloop_register_sock(int sock, eloop_event_type type,
eloop_sock_handler handler,
void *eloop_data, void *user_data)
{
struct eloop_sock_table *table;
assert(sock >= 0);
table = eloop_get_sock_table(type);
return eloop_sock_table_add_sock(table, sock, handler,
eloop_data, user_data);
}从代码中可以看到该函数将相应的handler和data放进sock_table表中，实现注册。
回到main函数中，hostapd_interface_init 读取hostapd配置文件并进行分配和解析：
/** * hostapd_interface_init - Read configuration file and init BSS data * * This function is used to parse configuration file for a full interface (one * or more BSSes sharing the same radio) and allocate memory for the BSS * interfaces. No actiual driver operations are started. */ static struct hostapd_iface * hostapd_interface_init(struct hapd_interfaces *interfaces, const char *if_name, const char *config_fname, int debug) { struct hostapd_iface *iface; int k; wpa_printf(MSG_ERROR, "Configuration file: %s", config_fname); iface = hostapd_init(interfaces, config_fname); if (!iface) return NULL; if (if_name) { os_strlcpy(iface->conf->bss[0]->iface, if_name, sizeof(iface->conf->bss[0]->iface)); } iface->interfaces = interfaces; for (k = 0; k < debug; k ) { if (iface->bss[0]->conf->logger_stdout_level > 0) iface->bss[0]->conf->logger_stdout_level--; } if (iface->conf->bss[0]->iface[0] == ' ' && !hostapd_drv_none(iface->bss[0])) { wpa_printf(MSG_ERROR, "Interface name not specified in %s, nor by '-i' parameter", config_fname); hostapd_interface_deinit_free(iface); return NULL; } return iface; }其中调用hostapd_init() 初始化配置：
/** * hostapd_init - Allocate and initialize per-interface data * @config_file: Path to the configuration file * Returns: Pointer to the allocated interface data or %NULL on failure * * This function is used to allocate main data structures for per-interface * data. The allocated data buffer will be freed by calling * hostapd_cleanup_iface(). */ struct hostapd_iface * hostapd_init(struct hapd_interfaces *interfaces, const char *config_file) { struct hostapd_iface *hapd_iface = NULL; struct hostapd_config *conf = NULL; struct hostapd_data *hapd; size_t i; hapd_iface = hostapd_alloc_iface(); if (hapd_iface == NULL) goto fail; hapd_iface->config_fname = os_strdup(config_file); if (hapd_iface->config_fname == NULL) goto fail; conf = interfaces->config_read_cb(hapd_iface->config_fname);//读取配置文件 if (conf == NULL) goto fail; hapd_iface->conf = conf; hapd_iface->num_bss = conf->num_bss; hapd_iface->bss = os_calloc(conf->num_bss, sizeof(struct hostapd_data *)); if (hapd_iface->bss == NULL) goto fail; //根据配置文件中bss的配置个数conf->num_bss的值通过调用hostapd_alloc_bss_data分配空间及相关设置 for (i = 0; i < conf->num_bss; i ) { hapd = hapd_iface->bss[i] = hostapd_alloc_bss_data(hapd_iface, conf, conf->bss[i]); if (hapd == NULL) goto fail; hapd->msg_ctx = hapd; } return hapd_iface; fail: wpa_printf(MSG_ERROR, "Failed to set up interface with %s", config_file); if (conf) hostapd_config_free(conf); if (hapd_iface) { os_free(hapd_iface->config_fname); os_free(hapd_iface->bss); wpa_printf(MSG_DEBUG, "%s: free iface %p", __func__, hapd_iface); os_free(hapd_iface); } return NULL; } 通过调用函数hostapd_driver_init获取配置信息保存在iface[i]中，然后通过调用函数hostapd_setup_interface函数将其配置信息写入内核。写入通过依次调用一下函数来实现：
hostapd_setup_interface
------>setup_interface
------>hostapd_set_country
------>setup_interface2
------>hostapd_setup_interface_complete
------>hostapd_set_freq
------>hostapd_set_rts
------>hostapd_set_state
------>hostapd_tx_queue_para, 通过这几个调用进入netlink层。
通过 hostapd_global_run处理socket事件的过程如下
static int hostapd_global_run(struct hapd_interfaces *ifaces, int daemonize, const char *pid_file) { #ifdef EAP_SERVER_TNC int tnc = 0; size_t i, k; for (i = 0; !tnc && i < ifaces->count; i ) { for (k = 0; k < ifaces->iface[i]->num_bss; k ) { if (ifaces->iface[i]->bss[0]->conf->tnc) { tnc ; break; } } } if (tnc && tncs_global_init() < 0) {
//调用tncs_global_init完成tnc相关的初始化 wpa_printf(MSG_ERROR, "Failed to initialize TNCS"); return -1; } #endif /* EAP_SERVER_TNC */ if (daemonize) { if (os_daemonize(pid_file)) {
//调用os_daemonize函数实现将该程序以后台进程运行 wpa_printf(MSG_ERROR, "daemon: %s", strerror(errno)); return -1; } if (eloop_sock_requeue()) { wpa_printf(MSG_ERROR, "eloop_sock_requeue: %s", strerror(errno)); return -1; } } eloop_run(); return 0; }其中核心函数是eloop_run :
void eloop_run(void) { #ifdef CONFIG_ELOOP_POLL int num_poll_fds; int timeout_ms = 0; #endif /* CONFIG_ELOOP_POLL */ #ifdef CONFIG_ELOOP_SELECT fd_set *rfds, *wfds, *efds; struct timeval _tv; #endif /* CONFIG_ELOOP_SELECT */ #ifdef CONFIG_ELOOP_EPOLL int timeout_ms = -1; #endif /* CONFIG_ELOOP_EPOLL */ #ifdef CONFIG_ELOOP_KQUEUE struct timespec ts; #endif /* CONFIG_ELOOP_KQUEUE */ int res; struct os_reltime tv, now; #ifdef CONFIG_ELOOP_SELECT //为三个文件描述符集申请空间 rfds = os_malloc(sizeof(*rfds)); wfds = os_malloc(sizeof(*wfds)); efds = os_malloc(sizeof(*efds)); if (rfds == NULL || wfds == NULL || efds == NULL) goto out; #endif /* CONFIG_ELOOP_SELECT */ while (!eloop.terminate && (!dl_list_empty(&eloop.timeout) || eloop.readers.count > 0 || eloop.writers.count > 0 || eloop.exceptions.count > 0)) { struct eloop_timeout *timeout; if (eloop.pending_terminate) { /* * This may happen in some corner cases where a signal * is received during a blocking operation. We need to * process the pending signals and exit if requested to * avoid hitting the SIGALRM limit if the blocking * operation took more than two seconds. */ // eloop_process_pending_signals函数对发生的信号进行处理 eloop_process_pending_signals(); if (eloop.terminate) break; } timeout = dl_list_first(&eloop.timeout, struct eloop_timeout, list); if (timeout) { //对超时时间进行设置timeout，主要是为下面调用的select函数会用到超时时间做准备 os_get_reltime(&now); if (os_reltime_before(&now, &timeout->time)) os_reltime_sub(&timeout->time, &now, &tv); else tv.sec = tv.usec = 0; #if defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL) timeout_ms = tv.sec * 1000 tv.usec / 1000; #endif /* defined(CONFIG_ELOOP_POLL) || defined(CONFIG_ELOOP_EPOLL) */ #ifdef CONFIG_ELOOP_SELECT _tv.tv_sec = tv.sec; _tv.tv_usec = tv.usec; #endif /* CONFIG_ELOOP_SELECT */ #ifdef CONFIG_ELOOP_KQUEUE ts.tv_sec = tv.sec; ts.tv_nsec = tv.usec * 1000L; #endif /* CONFIG_ELOOP_KQUEUE */ } #ifdef CONFIG_ELOOP_POLL num_poll_fds = eloop_sock_table_set_fds( &eloop.readers, &eloop.writers, &eloop.exceptions, eloop.pollfds, eloop.pollfds_map, eloop.max_pollfd_map); res = poll(eloop.pollfds, num_poll_fds, timeout ? timeout_ms : -1); #endif /* CONFIG_ELOOP_POLL */ #ifdef CONFIG_ELOOP_SELECT //将申请的文件描述符集与eloop对象相结合，并调用select函数对这些文件发生异常进行监听 eloop_sock_table_set_fds(&eloop.readers, rfds); eloop_sock_table_set_fds(&eloop.writers, wfds); eloop_sock_table_set_fds(&eloop.exceptions, efds); res = select(eloop.max_sock 1, rfds, wfds, efds, timeout ? &_tv : NULL); #endif /* CONFIG_ELOOP_SELECT */ #ifdef CONFIG_ELOOP_EPOLL if (eloop.count == 0) { res = 0; } else { res = epoll_wait(eloop.epollfd, eloop.epoll_events, eloop.count, timeout_ms); } #endif /* CONFIG_ELOOP_EPOLL */ #ifdef CONFIG_ELOOP_KQUEUE if (eloop.count == 0) { res = 0; } else { res = kevent(eloop.kqueuefd, NULL, 0, eloop.kqueue_events, eloop.kqueue_nevents, timeout ? &ts : NULL); } #endif /* CONFIG_ELOOP_KQUEUE */ if (res < 0 && errno != EINTR && errno != 0) { wpa_printf(MSG_ERROR, "eloop: %s: %s", #ifdef CONFIG_ELOOP_POLL "poll" #endif /* CONFIG_ELOOP_POLL */ #ifdef CONFIG_ELOOP_SELECT "select" #endif /* CONFIG_ELOOP_SELECT */ #ifdef CONFIG_ELOOP_EPOLL "epoll" #endif /* CONFIG_ELOOP_EPOLL */ #ifdef CONFIG_ELOOP_KQUEUE "kqueue" #endif /* CONFIG_ELOOP_EKQUEUE */ , strerror(errno)); goto out; } eloop.readers.changed = 0; eloop.writers.changed = 0; eloop.exceptions.changed = 0; eloop_process_pending_signals(); /* check if some registered timeouts have occurred */ timeout = dl_list_first(&eloop.timeout, struct eloop_timeout, list); if (timeout) { os_get_reltime(&now); if (!os_reltime_before(&now, &timeout->time)) { void *eloop_data = timeout->eloop_data; void *user_data = timeout->user_data; eloop_timeout_handler handler = timeout->handler; eloop_remove_timeout(timeout); handler(eloop_data, user_data); } } if (res <= 0) continue; if (eloop.readers.changed || eloop.writers.changed || eloop.exceptions.changed) { /* * Sockets may have been closed and reopened with the * same FD in the signal or timeout handlers, so we * must skip the previous results and check again * whether any of the currently registered sockets have * events. */ continue; } #ifdef CONFIG_ELOOP_POLL eloop_sock_table_dispatch(&eloop.readers, &eloop.writers, &eloop.exceptions, eloop.pollfds_map, eloop.max_pollfd_map); #endif /* CONFIG_ELOOP_POLL */ #ifdef CONFIG_ELOOP_SELECT eloop_sock_table_dispatch(&eloop.readers, rfds); eloop_sock_table_dispatch(&eloop.writers, wfds); eloop_sock_table_dispatch(&eloop.exceptions, efds); #endif /* CONFIG_ELOOP_SELECT */ #ifdef CONFIG_ELOOP_EPOLL eloop_sock_table_dispatch(eloop.epoll_events, res); #endif /* CONFIG_ELOOP_EPOLL */ #ifdef CONFIG_ELOOP_KQUEUE eloop_sock_table_dispatch(eloop.kqueue_events, res); #endif /* CONFIG_ELOOP_KQUEUE */ } eloop.terminate = 0; out: #ifdef CONFIG_ELOOP_SELECT os_free(rfds); os_free(wfds); os_free(efds); #endif /* CONFIG_ELOOP_SELECT */ return; }eloop_process_pending_signals函数对发生的信号进行处理
static void eloop_process_pending_signals(void)
{
int i;
if (eloop.signaled == 0)//有没有信号产生，如果有，那么这个标志位将为1，说明有信号需要处理，如果为0，那么没有信号要处理，函数返回
return;
eloop.signaled = 0;//将信号标示为置0，以便下次有信号产生时，置1
if (eloop.pending_terminate) {
//如果不用处理后面将会产生的信号，则立即向进程发送一个SIGALARM信号，然后将这个标志置0
#ifndef CONFIG_NATIVE_WINDOWS
alarm(0);
#endif /* CONFIG_NATIVE_WINDOWS */
eloop.pending_terminate = 0;
}
for (i = 0; i < eloop.signal_count; i ) { //对信号标示进行处理
if (eloop.signals[i].signaled) {
eloop.signals[i].signaled = 0;
//调用处理函数对相应的信号进行处理
eloop.signals[i].handler(eloop.signals[i].sig,
eloop.signals[i].user_data);
}
}
}eloop_run 函数的核心将要处理的socket事件添加到相应的表中，如下：
eloop_sock_table_set_fds(&eloop.readers, rfds);
eloop_sock_table_set_fds(&eloop.writers, wfds);
eloop_sock_table_set_fds(&eloop.exceptions, efds);
res = select(eloop.max_sock 1, rfds, wfds, efds,
timeout ? &_tv : NULL); 最后执行相应的提前注册的函数：
代码语言：javascript复制 eloop_sock_table_dispatch(&eloop.readers, rfds);
eloop_sock_table_dispatch(&eloop.writers, wfds);
eloop_sock_table_dispatch(&eloop.exceptions, efds); 发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/143370.html原文链接：https://javaforall.cn
