大家好，又见面了，我是你们的朋友全栈君
1. BM3D模型简介
BM3D模型是一个两阶段图像去噪方法，主要包含两个步骤:
(1) 在噪声图像上，利用局部区域搜索相似块，并进行堆叠，在变换域(DCT域、FFT域）利用硬阈值去噪方法对堆叠的图像块进行去噪，获得堆叠相似块的估计值，最后，根据均值权重进行聚合；
(2) 通过步骤(1) 获取初步估计的图像，在初步估计的图像上进行相似块的聚合； 然后，利用维纳协同滤波进行图像去噪，从而，获取最后的去噪结果
2. 模型实现(代码参考网络实现)：
代码语言：javascript复制% BM3D_Color_Demo
% BM3D 在彩色图像上去噪
% Author: HSW
% Date: 2018-05-06
%
clc;
close all;
clear all;
img_org = imread('timg.png');
figure(1);
imshow(img_org);
title('原图像');
% 加噪声
sigma = 25;
img_noise = double(img_org) sigma * randn(size(img_org));
figure;
imshow(img_noise / 255, []);
title('噪声图像');
img_denoise = BM3D_Color(img_noise, 0, sigma, 0, 1);
figure;
imshow(img_denoise / 255, []);
title('去噪图像'); % BM3D_Gray_Demo
% BM3D 在灰度图像上去噪
% Author: HSW
% Date: 2018-05-06
%
clc;
close all;
clear all;
img_org = imread('timg.png');
img_gray = rgb2gray(img_org);
figure(1);
imshow(img_gray);
title('原图像');
% 加噪声
sigma = 25;
img_noise = double(img_gray) sigma * randn(size(img_gray));
figure;
imshow(img_noise / 255, []);
title('噪声图像');
img_denoise = BM3D_Gray(img_noise, 0, sigma, 1);
figure;
imshow(img_denoise / 255, []);
title('去噪图像'); function img_denoise = BM3D_Color(img_noise, tran_mode, sigma, color_mode, isDisplay)
% BM3D实现去噪
% Inputs:
% img_noise: 噪声图像
% tran_mode: 变换方法： 默认值为0, tran_mode: = 0, fft; = 1, dct; = 2, dwt, = 3, db1
% sigma: 噪声水平，默认值为10
% color_mode: 彩色图像去噪时采用的颜色空间, 默认值为0, color_mode: = 0, YUV; = 1, YCbCr; = 2, OPP
% Ouputs:
% img_out: 去噪图像
% 参考文献：An Analysis and Implementation of the BM3D Image Denoising Method
% Inputs:
% img_in: 噪声图像，必须为矩形方阵
% tran_mode: = 0, FFT; = 1, DCT; = 2, DWT, = 3, db1
% Outputs:
% img_denoise: 去噪图像
%
%
if ~exist('isDisplay', 'var')
isDisplay = 0;
end
if ~exist('color_mode', 'var')
color_mode = 0;
end
if ~exist('sigma', 'var')
sigma = 10;
end
if ~exist('tran_mode', 'var')
tran_mode = 0;
end
[row, col, dims] = size(img_noise);
img_trans = rgb2other(img_noise, color_mode);
% First Step 参数
kHard = 8; % 块大小
pHard = 4; % 块移动间隔
lambda_distHard = 0; % 求相似的距离时，变换后，收缩的阈值
nHard = 40; % 搜索窗口大小
NHard = 28; % 最多相似块个数
tauHard = 5000; % 最大的相似距离for fft
% kaiser窗口的参数，实际上并没有特别大的影响
beta=2;
Wwin2D = kaiser(kHard, beta) * kaiser(kHard, beta)';
% Second Step参数
kWien = kHard;
pWien = pHard;
lambda_distWien = lambda_distHard;
nWien = nHard;
NWien = NHard;
tauWien = tauHard;
sigma2 = sigma*sigma;
if tran_mode == 0
% FFT
lambda2d=400;
lambda1d=500;
lambda2d_wie=50;
lambda1d_wie=500;
elseif tran_mode == 1
% DCT
lambda2d=50;
lambda1d=80;
lambda2d_wie=20;
lambda1d_wie=60;
elseif tran_mode == 2
% DWT
lambda2d=50;
lambda1d=80;
lambda2d_wie=20;
lambda1d_wie=60;
end
fprintf('BM3D: First Stage Start...n');
%block为原始图像块， tran_block为FFT变换且硬阈值截断后的频域系数(频域， 计算距离的时候采用的是变换块)
[block_ch1, tran_block_ch1, block2row_idx_ch1, block2col_idx_ch1] = im2block(img_trans(:,:,1), kHard, pHard, lambda_distHard, 0);
[block_ch2, tran_block_ch2, block2row_idx_ch2, block2col_idx_ch2] = im2block(img_trans(:,:,2), kHard, pHard, lambda_distHard, 0);
[block_ch3, tran_block_ch3, block2row_idx_ch3, block2col_idx_ch3] = im2block(img_trans(:,:,3), kHard, pHard, lambda_distHard, 0);
%bn_r和bn_c为行和列上的图像块个数
bn_r = floor((row - kHard) / pHard) 1;
bn_c = floor((col - kHard) / pHard) 1;
%基础估计的图像
img_basic_sum = zeros(row, col, 3);
img_basic_weight = zeros(row, col, 3);
%对每个块遍历
for i=1:bn_r
for j=1:bn_c
% 利用亮度通道进行相似块搜索
[sim_blk_ch1, sim_num, sim_blk_idx] = search_similar_block(i, j, block_ch1, tran_block_ch1, floor(nHard/pHard), bn_r, bn_c, tauHard, NHard);
% 进行亮度通道处理
% 协同滤波： 公式(2)
tran3d_blk_shrink_ch1 = transform_3d(sim_blk_ch1, tran_mode, lambda2d, lambda1d);
tran3d_blk_shrink_ch2 = transform_3d(block_ch2(:,:,sim_blk_idx), tran_mode, lambda2d, lambda1d);
tran3d_blk_shrink_ch3 = transform_3d(block_ch3(:,:,sim_blk_idx), tran_mode, lambda2d, lambda1d);
% 聚合： 公式(3)中的说明
NHard_P_ch1 = nnz(tran3d_blk_shrink_ch1);
NHard_P_ch2 = nnz(tran3d_blk_shrink_ch2);
NHard_P_ch3 = nnz(tran3d_blk_shrink_ch3);
if NHard_P_ch1 > 1
wHard_P_ch1 = 1 / NHard_P_ch1;
else
wHard_P_ch1 = 1;
end
if NHard_P_ch2 > 1
wHard_P_ch2 = 1 / NHard_P_ch2;
else
wHard_P_ch2 = 1;
end
if NHard_P_ch3 > 1
wHard_P_ch3 = 1 / NHard_P_ch3;
else
wHard_P_ch3 = 1;
end
blk_est_ch1 = inv_transform_3d(tran3d_blk_shrink_ch1,tran_mode);
blk_est_ch1 = real(blk_est_ch1);
blk_est_ch2 = inv_transform_3d(tran3d_blk_shrink_ch2, tran_mode);
blk_est_ch2 = real(blk_est_ch2);
blk_est_ch3 = inv_transform_3d(tran3d_blk_shrink_ch3, tran_mode);
blk_est_ch3 = real(blk_est_ch3);
% 公式(3): 对亮度通道，即第1个通道
for k=1:sim_num
idx = sim_blk_idx(k);
ir = block2row_idx_ch1(idx);
jr = block2col_idx_ch1(idx);
img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 1) = img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 1) wHard_P_ch1 * blk_est_ch1(:, :, k);
img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 1) = img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 1) wHard_P_ch1;
img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 2) = img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 2) wHard_P_ch2 * blk_est_ch2(:, :, k);
img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 2) = img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 2) wHard_P_ch2;
img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 3) = img_basic_sum(ir:ir kHard-1, jr:jr kHard-1, 3) wHard_P_ch3 * blk_est_ch3(:, :, k);
img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 3) = img_basic_weight(ir:ir kHard-1, jr:jr kHard-1, 3) wHard_P_ch3;
end
end
end
img_basic = img_basic_sum ./ img_basic_weight;
if isDisplay
figure;
img_rgb = other2rgb(img_basic, color_mode);
imshow(img_rgb / 255.0 ,[]);
title('BM3D:Fist Stage Result');
end
fprintf('BM3D: First Stage End...n');
fprintf('BM3D: Second Stage Start...n');
[block_basic_ch1,tran_block_basic_ch1,block2row_idx_basic_ch1,block2col_idx_basic_ch1] = im2block(img_basic(:, :, 1), kWien, pWien, lambda_distWien, 0);
[block_basic_ch2,tran_block_basic_ch2,block2row_idx_basic_ch3,block2col_idx_basic_ch2] = im2block(img_basic(:, :, 2), kWien, pWien, lambda_distWien, 0);
[block_basic_ch3,tran_block_basic_ch3,block2row_idx_basic_ch3,block2col_idx_basic_ch3] = im2block(img_basic(:, :, 3), kWien, pWien, lambda_distWien, 0);
bn_r = floor((row - kWien) / pWien) 1;
bn_c = floor((col - kWien) / pWien) 1;
img_wien_sum = zeros(row, col, 3);
img_wien_weight = zeros(row, col, 3);
for i=1:1:bn_r
for j=1:1:bn_c
% 公式(5), 利用亮度进行相似性搜索
[sim_blk_basic_ch1, sim_num, sim_blk_basic_idx] = search_similar_block(i, j, block_basic_ch1, tran_block_basic_ch1, floor(nWien/pWien), bn_r, bn_c, tauWien, NWien);
% 公式(6)
tran3d_blk_basic_ch1 = transform_3d(sim_blk_basic_ch1, tran_mode, lambda2d_wie, lambda1d_wie);
tran3d_blk_basic_ch2 = transform_3d(block_basic_ch2(:, :, sim_blk_basic_idx), tran_mode, lambda2d_wie, lambda1d_wie);
tran3d_blk_basic_ch3 = transform_3d(block_basic_ch3(:, :, sim_blk_basic_idx), tran_mode, lambda2d_wie, lambda1d_wie);
omega_P_ch1 = (tran3d_blk_basic_ch1.^2) ./ ((tran3d_blk_basic_ch1.^2) sigma2);
omega_P_ch2 = (tran3d_blk_basic_ch2.^2) ./ ((tran3d_blk_basic_ch2.^2) sigma2);
omega_P_ch3 = (tran3d_blk_basic_ch3.^2) ./ ((tran3d_blk_basic_ch3.^2) sigma2);
% 公式(7)
tran3d_blk_ch1 = transform_3d(block_ch1(:, :, sim_blk_basic_idx), tran_mode, lambda2d_wie, lambda1d_wie);
tran3d_blk_ch2 = transform_3d(block_ch2(:, :, sim_blk_basic_idx), tran_mode, lambda2d_wie, lambda1d_wie);
tran3d_blk_ch3 = transform_3d(block_ch3(:, :, sim_blk_basic_idx), tran_mode, lambda2d_wie, lambda1d_wie);
blk_est_ch1 = inv_transform_3d(omega_P_ch1 .* tran3d_blk_ch1, tran_mode);
blk_est_ch2 = inv_transform_3d(omega_P_ch2 .* tran3d_blk_ch2, tran_mode);
blk_est_ch3 = inv_transform_3d(omega_P_ch3 .* tran3d_blk_ch3, tran_mode);
blk_est_ch1 = real(blk_est_ch1);
blk_est_ch2 = real(blk_est_ch2);
blk_est_ch3 = real(blk_est_ch3);
NWien_P_ch1 = nnz(omega_P_ch1);
NWien_P_ch2 = nnz(omega_P_ch2);
NWien_P_ch3 = nnz(omega_P_ch3);
if NWien_P_ch1 > 1
wWien_P_ch1 = 1 / (NWien_P_ch1);
else
wWien_P_ch1 = 1;
end
if NWien_P_ch2 > 1
wWien_P_ch2 = 1/(NWien_P_ch2);
else
wWien_P_ch2 = 1;
end
if NWien_P_ch3 > 1
wWien_P_ch3 = 1 / (NWien_P_ch3);
else
wWien_P_ch3 = 1;
end
% 公式(8)
for k=1:sim_num
idx=sim_blk_basic_idx(k);
ir=block2row_idx_basic_ch1(idx);
jr=block2col_idx_basic_ch1(idx);
img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 1) = img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 1) wWien_P_ch1 * blk_est_ch1(:, :, k);
img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 1) = img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 1) wWien_P_ch1;
img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 2) = img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 2) wWien_P_ch2 * blk_est_ch2(:, :, k);
img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 2) = img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 2) wWien_P_ch2;
img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 3) = img_wien_sum(ir:ir kWien-1, jr:jr kWien-1, 3) wWien_P_ch3 * blk_est_ch3(:, :, k);
img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 3) = img_wien_weight(ir:ir kWien-1, jr:jr kWien-1, 3) wWien_P_ch3;
end
end
end
img_other = img_wien_sum ./ img_wien_weight;
img_denoise = other2rgb(img_other, color_mode);
fprintf('BM3D: Second Stage Endn');function img_denoise = BM3D_Gray(img_noise, tran_mode, sigma, isDisplay)
% 参考文献：An Analysis and Implementation of the BM3D Image Denoising Method
% Inputs:
% img_noise: 灰度噪声图像，必须为矩形方阵
% tran_mode: = 0, fft; = 1, dct; = 2, dwt, = 3, db1
% Outputs:
% img_denoise: 去噪图像
%
if ~exist('tran_mode', 'var')
tran_mode = 0;
end
if ~exist('sigma', 'var')
sigma = 10;
end
if ~exist('isDisplay', 'var')
isDisplay = 0;
end
[row,col] = size(img_noise);
% First Step 参数
kHard = 8; % 块大小
pHard = 4; % 块移动间隔
lambda_distHard = 0; % 求相似的距离时，变换后，收缩的阈值
nHard = 40; % 搜索窗口大小
NHard = 28; % 最多相似块个数
tauHard = 5000; % 最大的相似距离for fft
% kaiser窗口的参数，实际上并没有特别大的影响
beta=2;
Wwin2D = kaiser(kHard, beta) * kaiser(kHard, beta)';
% Second Step参数
kWien = kHard;
pWien = pHard;
lambda_distWien = lambda_distHard;
nWien = nHard;
NWien = NHard;
tauWien = tauHard;
sigma2 = sigma*sigma;
if(tran_mode==0) �t
lambda2d=400;
lambda1d=500;
lambda2d_wie=50;
lambda1d_wie=500;
elseif(tran_mode == 1) �t
lambda2d=50;
lambda1d=80;
lambda2d_wie=20;
lambda1d_wie=60;
elseif(tran_mode == 2) %dwt
lambda2d=50;
lambda1d=80;
lambda2d_wie=20;
lambda1d_wie=60;
end
%block为原始图像块， tran_block为FFT变换且硬阈值截断后的频域系数(频域， 计算距离的时候采用的是变换块)
[block,tran_block,block2row_idx,block2col_idx]=im2block(img_noise,kHard,pHard,lambda_distHard,0);
%bn_r和bn_c为行和列上的图像块个数
bn_r=floor((row-kHard)/pHard) 1;
bn_c=floor((col-kHard)/pHard) 1;
%基础估计的图像
img_basic_sum=zeros(row,col);
img_basic_weight=zeros(row,col);
�sic处理
fprintf('BM3D: First Stage Start...n');
%对每个块遍历
for i=1:bn_r
for j=1:bn_c
[sim_blk,sim_num,sim_blk_idx]=search_similar_block(i,j,block,tran_block,floor(nHard/pHard),bn_r,bn_c,tauHard,NHard);
% 协同滤波： 公式(2)
tran3d_blk_shrink=transform_3d(sim_blk,tran_mode,lambda2d,lambda1d);
% 聚合： 公式(3)中的说明
NHard_P=nnz(tran3d_blk_shrink);
if(NHard_P >1)
wHard_P=1/NHard_P;
else
wHard_P=1;
end
blk_est =inv_transform_3d(tran3d_blk_shrink,tran_mode);
blk_est=real(blk_est);
% 公式(3)
for k=1:sim_num
idx=sim_blk_idx(k);
ir=block2row_idx(idx);
jr=block2col_idx(idx);
img_basic_sum(ir:ir kHard-1,jr:jr kHard-1) = img_basic_sum(ir:ir kHard-1,jr:jr kHard-1) wHard_P*blk_est(:,:,k);
img_basic_weight(ir:ir kHard-1,jr:jr kHard-1) = img_basic_weight(ir:ir kHard-1,jr:jr kHard-1) wHard_P;
end
end
end
fprintf('BM3D: First Stage End...n');
img_basic=img_basic_sum./img_basic_weight;
if isDisplay
figure;
imshow(img_basic,[]);
title('BM3D:Fist Stage Result');
end
[block_basic,tran_block_basic,block2row_idx_basic,block2col_idx_basic] = im2block(img_basic,kWien,pWien,lambda_distWien,0);
bn_r=floor((row-kWien)/pWien) 1;
bn_c=floor((col-kWien)/pWien) 1;
img_wien_sum=zeros(row,col);
img_wien_weight=zeros(row,col);
fprintf('BM3D: Second Stage Start...n');
for i=1:1:bn_r
for j=1:1:bn_c
% 公式(5)
[sim_blk_basic,sim_num,sim_blk_basic_idx] = search_similar_block(i,j,block_basic,tran_block_basic,floor(nWien/pWien),bn_r,bn_c,tauWien,NWien);
% 公式(6)
tran3d_blk_basic = transform_3d(sim_blk_basic,tran_mode,lambda2d_wie,lambda1d_wie);
omega_P=(tran3d_blk_basic.^2)./((tran3d_blk_basic.^2) sigma2);
% 公式(7)
tran3d_blk = transform_3d(block(:,:,sim_blk_basic_idx),tran_mode,lambda2d_wie,lambda1d_wie);
blk_est=inv_transform_3d(omega_P.*tran3d_blk,tran_mode);
blk_est=real(blk_est);
NWien_P=nnz(omega_P);
if(NWien_P >1)
wWien_P=1/(NWien_P);
else
wWien_P=1;
end
% 公式(8)
for k=1:sim_num
idx=sim_blk_basic_idx(k);
ir=block2row_idx_basic(idx);
jr=block2col_idx_basic(idx);
img_wien_sum(ir:ir kWien-1,jr:jr kWien-1) = img_wien_sum(ir:ir kWien-1,jr:jr kWien-1) wWien_P*blk_est(:,:,k);
img_wien_weight(ir:ir kWien-1,jr:jr kWien-1) = img_wien_weight(ir:ir kWien-1,jr:jr kWien-1) wWien_P;
end
end
end
fprintf('BM3D: Second Stage Endn');
img_denoise = img_wien_sum./img_wien_weight;function [block,transform_block,block2row_idx,block2col_idx] =im2block(img,k,p,lambda2D,delta)
% 实现图像分块
% Inputs：
% k: 块大小
% p: 块移动步长
% lambda_2D: 收缩阈值
% delta: 收缩阈值
% Outputs:
% block: 返回的块
% transform_block: 变换后的块
% block2row_idx: 块索引与图像块的左上角行坐标对应关系
% block2col_idx: 块索引与图像块的左上角列坐标对应关系
%
[row,col] = size(img);
% 频域去噪中的硬阈值，实际上原文中，对于噪声方差小于40时thres = 0, 具体见公式(1)的说明第2点(即距离计算)
thres = lambda2D*delta*sqrt(2*log(row*col));
% r_num 和 c_num分别表示行和列上可以采集的块的数目
r_num = floor((row-k)/p) 1;
c_num = floor((col-k)/p) 1;
block = zeros(k,k,r_num*c_num);
block2row_idx = [];
block2col_idx = [];
cnt = 1;
for i = 0:r_num-1
rs = 1 i*p;
for j = 0:c_num-1
cs = 1 j*p;
block(:,:,cnt) = img(rs:rs k-1,cs:cs k-1);
block2row_idx(cnt) = rs;
block2col_idx(cnt) = cs;
tr_b = fft2(block(:,:,cnt));
idx = find(abs(tr_b)<thres);
tr_b(idx) = 0;
transform_block(:,:,cnt) = tr_b;
cnt = cnt 1;
end
end
endfunction [blk_est]=inv_transform_3d(blk_tran3d,tran_mode)
% 3D 逆变换
% Inputs:
% blk_tran3d: 在频域中，硬阈值滤波的图像块
% tran_mode: 变换方法
% Outputs:
% blk_est:
%
global blk_tran1d_s;
global blk_2d_s;
[m,n,blk_num]=size(blk_tran3d);
blk_invtran1d=zeros(m,n,blk_num);
blk_est=zeros(m,n,blk_num);
if(tran_mode==0) �t
for i=1:1:m
for j=1:1:n
blk_invtran1d(i,j,:)=ifft(blk_tran3d(i,j,:));
end
end
for i=1:1:blk_num
blk_est(:,:,i)=ifft2(blk_invtran1d(:,:,i));
end
elseif(tran_mode==1) �t
for i=1:1:m
for j=1:1:n
blk_invtran1d(i,j,:)=idct(blk_tran3d(i,j,:));
end
end
for i=1:1:blk_num
blk_est(:,:,i)=idct2(blk_invtran1d(:,:,i));
end
elseif(tran_mode==2) %dwt
blk_num=length(blk_2d_s);
blk_c=waverec2(blk_tran3d,blk_tran1d_s,'haar');
blk_est=[];
for i=1:1:blk_num
blk_est(:,:,i)=waverec2(blk_c(:,i),blk_2d_s{i},'Bior1.5');
end
else
error('tran_mode error');
end
endfunction img_trans = other2rgb(img_in, color_mode)
% 将RGB颜色空间转为其他颜色空间
% Inputs:
% img_in: RGB颜色空间图像
% color_mode: 彩色图像去噪时采用的颜色空间, 默认值为0, color_mode: = 0, YUV; = 1, YCbCr; = 2, OPP
% Outputs:
% img_trans: 其他颜色空间
%
% Author: HSW
% Date: 2018-05-06
img_trans = zeros(size(img_in));
[row, col, dims] = size(img_in);
if color_mode == 0
color_tran = [0.30, 0.59, 0.11; -0.15, -0.29, 0.44; 0.61, -0.51, -0.10];
color_tran_inv = inv(color_tran);
for i = 1:row
for j = 1:col
other = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = color_tran_inv * other;
end
end
elseif color_mode == 1
color_tran = [0.30, 0.59, 0.11; -0.17, -0.33, 0.50; 0.50, -0.42, -0.08];
color_tran_inv = inv(color_tran);
for i = 1:row
for j = 1:col
other = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = color_tran_inv * other;
end
end
elseif color_mode == 2
color_tran = [1.0 / 3.0, 1.0 / 3.0, 1.0 / 3.0; 1.0 / 2.0, 0, -1.0 / 2.0; 1.0 / 4.0, -1.0 / 2.0, 1.0 / 4.0];
color_tran_inv = inv(color_tran);
for i = 1:row
for j = 1:col
other = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = color_tran_inv * other;
end
end
end
endfunction img_trans = rgb2other(img_in, color_mode)
% 将RGB颜色空间转为其他颜色空间
% Inputs:
% img_in: RGB颜色空间图像
% color_mode: 彩色图像去噪时采用的颜色空间, 默认值为0, color_mode: = 0, YUV; = 1, YCbCr; = 2, OPP
% Outputs:
% img_trans: 其他颜色空间
%
% Author: HSW
% Date: 2018-05-06
img_trans = zeros(size(img_in));
[row, col, dims] = size(img_in);
if color_mode == 0
color_tran = [0.30, 0.59, 0.11; -0.15, -0.29, 0.44; 0.61, -0.51, -0.10];
for i = 1:row
for j = 1:col
rgb = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = (color_tran * rgb)';
end
end
elseif color_mode == 1
color_tran = [0.30, 0.59, 0.11; -0.17, -0.33, 0.50; 0.50, -0.42, -0.08];
for i = 1:row
for j = 1:col
rgb = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = (color_tran * rgb)';
end
end
elseif color_mode == 2
color_tran = [1.0 / 3.0, 1.0 / 3.0, 1.0 / 3.0; 1.0 / 2.0, 0, -1.0 / 2.0; 1.0 / 4.0, -1.0 / 2.0, 1.0 / 4.0];
for i = 1:row
for j = 1:col
rgb = [img_in(i, j, 1); img_in(i, j, 2); img_in(i, j, 3)];
img_trans(i, j, :) = (color_tran * rgb)';
end
end
end
endfunction [sim_blk,sim_num,sim_blk_idx]=search_similar_block(ik,jk,block,tran_block,np,bn_r,bn_c,tau,max_sim_num)
% 搜索相似块
% Inputs:
% ik, jk： 待搜索相似块的索引
% block: 图像块集合
% tran_block： 图像块FFT硬阈值过滤后的FFT系数
% k: 图像块大小
% np: floor(nHard / pHard)， 其中nHard表示图像的搜索区域大小， pHard表示块的移动步长
% bn_r, bn_c: 图像总的行/列可以采集图像块的数目
% tau: 图像块相似性判断阈值，见公式(1)
% max_sim_num: 最多保留相似块的数目
% Ouputs:
% sim_blk:
% sim_num:
% sim_blk_idx:
%
% 搜索窗口的左上角，右下角的块索引
in_s = max(ik-floor(np/2),1);
jn_s = max(jk-floor(np/2),1);
in_e = min(ik floor(np/2),bn_r);
jn_e = min(jk floor(np/2),bn_c);
% 当前参考块
ref_blk = tran_block(:,:,((ik-1)*bn_c jk));
ii = in_s:1:in_e;
jj = jn_s:1:jn_e;
[II,JJ] = meshgrid(ii,jj);
IDX = (II-1)*bn_c JJ;
blk_idx=IDX(:);
% 收缩范围内的全部图像块
cur_blk=tran_block(:,:,blk_idx);
cnt=size(cur_blk,3);
ref_blk_mat=repmat(ref_blk,[1,1,cnt]);
delta_blk=cur_blk-ref_blk_mat;
dist=sum(sum(delta_blk.*delta_blk,1),2);
[dist_sort,dist_idx]=sort(dist);
% 最大相似块是真实相似块和目标参数相似块的最小值
max_num=min(cnt,max_sim_num);
if(dist_sort(max_num)<tau)
sim_num=max_num;
else
sim_num=sum(dist_sort(1:max_num)<tau);
end
cnt_idx=dist_idx(1:sim_num);
sim_blk_idx=blk_idx(cnt_idx);
sim_blk=block(:,:,sim_blk_idx);
endfunction [val]=thres_shrink(data,thres)
% 进行阈值截断： 即 data(i) < thres ? data(i) = 0 : data(i) = data(i)
% Inputs:
% data: 阈值截断前的数据
% thres: 阈值
% Ouputs:
% val: 阈值截断后的数据
%
val=data;
idx=find(abs(data)<thres);
val(idx)=0;
endfunction blk_tran3d = transform_3d(blk_3d,tran_mode,lambda2d,lambda1d)
% 进行3D变换，即Collaborative Filtering: 在图像块内进行2D变换，在图像块间进行1D变换
% 公式(2)
% Inputs:
% blk_3d:
% tran_mode:
% Ouputs:
%
global blk_tran1d_s;
global blk_2d_s;
[m,n,blk_num]=size(blk_3d);
%变换不同时，可能需要修改？？
blk_2d_shrink=zeros(m,n,blk_num);
blk_1d_shrink=zeros(m,n,blk_num);
if(tran_mode==0) �t
for i=1:1:blk_num
blk_tran2d = fft2(blk_3d(:,:,i));
blk_2d_shrink(:,:,i) = thres_shrink(blk_tran2d,lambda2d);
end
for i=1:1:m
for j=1:1:n
blk_tran1d = fft(blk_2d_shrink(i,j,:));
blk_1d_shrink(i,j,:) = thres_shrink(blk_tran1d,lambda1d);
end
end
blk_tran3d=blk_1d_shrink;
elseif(tran_mode==1) �t
for i=1:1:blk_num
blk_tran2d=dct2(blk_3d(:,:,i));
blk_2d_shrink(:,:,i)=thres_shrink(blk_tran2d,lambda2d);
end
for i=1:1:m
for j=1:1:n
blk_tran1d=dct(blk_2d_shrink(i,j,:));
blk_1d_shrink(i,j,:)=thres_shrink(blk_tran1d,lambda1d);
end
end
blk_tran3d=blk_1d_shrink;
elseif(tran_mode==2) %dwt
blk_2d_s={};
blk_2d_shrink=[];%zeros()
for i=1:1:blk_num
[blk_tran2d_c,blk_tran2d_s]=wavedec2(blk_3d(:,:,i),2,'Bior1.5');
blk_2d_shrink(:,i)=thres_shrink(blk_tran2d_c,lambda2d);
blk_2d_s{i}=blk_tran2d_s;
end
%这里应该用 wavedec.因为是对1维？？
[blk_tran1d_c,blk_tran1d_s]=wavedec2(blk_2d_shrink,1,'haar');
blk_tran3d=thres_shrink(blk_tran1d_c,lambda1d);
% elseif(strcmp(tran_mode,'db1')) %还未实现
% blk_2d_s={};
% blk_2d_shrink=[];%zeros()
% for i=1:1:blk_num
% [blk_tran2d_cA,blk_tran2d_cH,blk_tran2d_cV,blk_tran2d_cD]=...
% dwt2(blk_3d(:,:,i),'db1');
% blk_2d_shrink(:,i)=thres_shrink(blk_tran2d_c,lambda2d);
% blk_2d_s{i}=blk_tran2d_s;
% end
% [blk_tran1d_c,blk_tran1d_s]=wavedec2(blk_2d_shrink,1,'haar');
% blk_tran3d=thres_shrink(blk_tran1d_c,lambda1d);
else
error('tran_mode error');
end
end3. 模型效果：
3.1 灰度图像
3.2 彩色图像
发布者：全栈程序员栈长，转载请注明出处：https://javaforall.cn/135614.html原文链接：https://javaforall.cn
