华为设备实现VLAN和单臂路由
一、VLAN 1、创建VLAN [Huawei]vlan 10 //创建并进入VLAN10 [Huawei]vlan batch 10 20 //创建VLAN10和20 [Huawei]vlan batch 10 to 20 //创建VLAN10至20 2、查看VLAN display vlan 3、配置接口类型(access、trunk和hybrid，默认为Hybrid) [Huawei-Ethernet0/0/1]port link-type access 4、将Access接口加入VLAN(两种方法) 1)VLAN视图下 [Huawei-vlan2]port Ethernet 0/0/1 2)接口视图下 [Huawei-Ethernet0/0/1]port default vlan 2 5、将Trunk类型接口加入VLAN [Huawei-Ethernet0/0/1]port trunk allow-pass vlan 2
二、单臂路由 1、创建vlan10和vlan20 [Huawei]vlan batch 10 20 2、设置接口类型为access并加入VLAN [Huawei]interface Ethernet 0/0/1 [Huawei-Ethernet0/0/1]port link-type access [Huawei-Ethernet0/0/1]port default vlan 10 3、配置中继口trunk并向允许通过的VLAN中 [Huawei-Ethernet0/0/22]port link-type trunk [Huawei-Ethernet0/0/22]port trunk allow-pass vlan 10 20 4、配置单臂路由 [Huawei]interface GigabitEthernet 0/0/0 [Huawei-GigabitEthernet0/0/0]undo shutdown [Huawei]interface GigabitEthernet 0/0/0.10 [Huawei-GigabitEthernet0/0/0.10]dot1q termination vid 10 //配置VLAN类型和封装协议 [Huawei-GigabitEthernet0/0/0.10]arp broadcast enable //使子接口支持ARP广播
