Windows 部署 Elasticsearch + kibana 8.0 指南

2022-04-06 17:52:45 浏览数 (1)

以下内容图示为主，主要探讨和早期版本的不同，给大家升级 8.0 或者更高版本铺路。

一、Windows 单节点集群部署

1、步骤1：下载并解压 elasticsearch、kibana 安装包。

2、步骤2：启动 elasticsearch。

注意！！！！！

不要修改任何配置，一会我会讲为什么。

启动 elasticsearch 后，记录命令行提示的信息。如下：

代码语言：javascript复制
-> Elasticsearch security features have been automatically configured!
-> Authentication is enabled and cluster connections are encrypted.

->  Password for the elastic user (reset with bin/elasticsearch-reset-password -u elastic):
  E28HdAOZEdumJU7A9wL7

->  HTTP CA certificate SHA-256 fingerprint:
  264b58e0f92f1e7492cc4cd407aac886012b026af6a20d777a05cd0ddccb43b4

->  Configure Kibana to use this cluster:
* Run Kibana and click the configuration link in the terminal when Kibana starts.
* Copy the following enrollment token and paste it into Kibana in your browser (valid for the next 30 minutes):
  eyJ2ZXIiOiI4LjAuMCIsImFkciI6WyIxNzIuMjAuNi4yMjU6OTIwMCIsIjE5Mi4xNjguMTAxLjU6OTIwMCJdLCJmZ3IiOiIyNjRiNThlMGY5MmYxZTc0OTJjYzRjZDQwN2FhYzg4NjAxMmIwMjZhZjZhMjBkNzc3YTA1Y2QwZGRjY2I0M2I0Iiwia2V5IjoiWUdxX0IzOEI3enY2MVdWT2pDeUI6ak1zZ3o3a1FUSE9pMHd1aHFfUjNvZyJ9

->  Configure other nodes to join this cluster:
* On this node:
  - Create an enrollment token with bin/elasticsearch-create-enrollment-token -s node.
  - Uncomment the transport.host setting at the end of config/elasticsearch.yml.
  - Restart Elasticsearch.
* On other nodes:
  - Start Elasticsearch with bin/elasticsearch --enrollment-token <token>, using the enrollment token that you generated.

步骤3、启动 Kibana

注意下面的提示信息，提示我们浏览器访问，并完成配置。

代码语言：javascript复制
i Kibana has not been configured.

Go to http://localhost:5601/?code=368039 to get started.

4、步骤4：完成 Kibana 配置

二、8.X 的安装配置简化体现在哪里？

铭毅的观察：

  • 节点无需任何安全配置，即可实现 TLS 加密通信、Https 加密通信。
  • TLS 应用于 节点间的通信。
  • Https 应用于 Http访问，例如：浏览器访问 elasticsearch。

在第一次启动之后，elasticsearch 下的elasticsearch.yml 文件自动新增配置如下：

代码语言：javascript复制
Enable security features
xpack.security.enabled: true

xpack.security.enrollment.enabled: true

Enable encryption for HTTP API client connections, such as Kibana, Logstash, and Agents
xpack.security.http.ssl:
  enabled: true
  keystore.path: certs/http.p12

Enable encryption and mutual authentication between cluster nodes
xpack.security.transport.ssl:
  enabled: true
  verification_mode: certificate
  keystore.path: certs/transport.p12
  truststore.path: certs/transport.p12
Create a new cluster with the current node only
Additional nodes can still join the cluster later
cluster.initialmasternodes: ["DESKTOP-TKQF337"]

Allow HTTP API connections from localhost and local networks
Connections are encrypted and require user authentication
http.host: [local, site]

Allow other nodes to join the cluster from localhost and local networks
Connections are encrypted and mutually authenticated
#transport.host: [local, site]
#----------------------- END SECURITY AUTO CONFIGURATION -------------------------

而 Kibana 下的配置在浏览器配置完毕后，自动新增配置如下

代码语言：javascript复制
# This section was automatically generated during setup.
elasticsearch.hosts: ['https://172.20.6.225:9200']
elasticsearch.serviceAccountToken: AAEAAWVsYXN0aWMva2liYW5hL2Vucm9sbC1wcm9jZXNzLXRva2VuLTE2NDUxMDI3NzQyOTg6VWszUEc1YUtTMkdXT1lxMkNaUVdXdw
elasticsearch.ssl.certificateAuthorities: ['D:2.es_installkibana-8.0.0-windows-x86_64kibana-8.0.0dataca_1645102775117.crt']
xpack.fleet.outputs: [{id: fleet-default-output, name: default, is_default: true, is_default_monitoring: true, type: elasticsearch, hosts: ['https://172.20.6.225:9200'], ca_trusted_fingerprint: 264b58e0f92f1e7492cc4cd407aac886012b026af6a20d777a05cd0ddccb43b4}]

三、更新了哪些认知？

这和早期版本使用不太一样的。

我习惯配置成本地 ip 地址，然后再访问的，包括云服务的我也是先改配置再访问。

  • 优点：这种自动化的方式，单节点本机无需配置即可启动，非常方便。
  • 缺点：对于云服务器方式，这种方式是不凑效的，为啥？

关于云服务器的不生效，本质原因，看官方文档：

https://www.elastic.co/guide/en/elasticsearch/reference/current/configuring-stack-security.html

代码语言：javascript复制
When Elasticsearch starts for the first time, the security auto-configuration process binds the HTTP layer to both _site_ and _local_, but only binds the transport layer to _local_. This intended behavior ensures that you can start a single-node cluster with security enabled by default without any additional configuration.

什么是_site_?

  • site

Any site-local addresses on the system, for example 192.168.0.1.

什么是_local_?

  • local

Any loopback addresses on the system, for example 127.0.0.1.

目前看 linux 云服务器在无图形化桌面浏览器的情况下无法通过浏览器实现。

那么云服务器的 Elasticsearch 怎么搞起来？且听下回分解。

下一篇：云服务器 Centos7 部署 Elasticsearch 8.0 Kibana 8.0 指南

发文时间：2022-02-17

云服务器 apache https ElasticsearchService 网络安全

0 人点赞