SVG Arc
目前Svg的Arc的参数字符串如下:
代码语言：javascript复制a rx ry x-axis-rotation large-arc-flag sweep-flag x y 除了a表示标识为Arc之外,其余参数说明如下:
参数 | 说明 |
|---|---|
rx | 椭圆半长轴 |
ry | 椭圆半短轴 |
x-axis-rotation | 椭圆相对于坐标系的旋转角度，角度数而非弧度数 |
large-arc-flag | 是否优(大)弧：0否，1是 |
sweep-flag | 绘制方向：0逆时针，1顺时针 |
x | 圆弧终点的x坐标 |
y | 圆弧终点的y坐标 |
求Arc的开始角和摆动角
实际上，在W3C的有关SVG Arc实现有相关文档和公式
当已知参数：
代码语言：javascript复制x1 y1 x2 y2 fA fS rx ry φ求出以下参数的值：
代码语言：javascript复制cx cy θ1 Δθ其中已知参数说明如下：
参数 | 说明 | 备注 |
|---|---|---|
(x1,y1) | 当前坐标 | |
(x2,y2) | 终点坐标 | |
fA | 是否优(大)弧 | Arc的参数字符：large-arc-flag |
fS | 绘制方向 | Arc的参数字符：sweep-flag |
rx | 椭圆半长轴 | Arc的参数字符：rx |
ry | 椭圆半短轴 | Arc的参数字符：ry |
φ | 椭圆相对于坐标系的旋转角度 | Arc的参数字符：x-axis-rotation |
需要求的参数说明：
参数 | 说明 | 备注 |
|---|---|---|
(cx,cy) | 椭圆中心坐标点 | |
θ1 | 起始角 | |
Δθ | 起始角到结束角的夹角(摆动角) | 结束角= 起始角θ1 摆动角Δθ |
那么则有如下公式：
代码如下：
代码语言：javascript复制 /// <summary>
/// 获取弧线的开始角度和摆动角度
/// </summary>
/// <param name="x1">起点X</param>
/// <param name="y1">起点Y</param>
/// <param name="x2">终点X</param>
/// <param name="y2">终点Y</param>
/// <param name="fA">优劣弧:1 优弧 0劣弧</param>
/// <param name="fs">顺逆时针绘制：1 顺时针 0 逆时针</param>
/// <param name="rx">椭圆半长轴</param>
/// <param name="ry">椭圆半短轴</param>
/// <param name="φ">旋转角</param>
/// <returns></returns>
private static (double startAngle, double swAngle) GetArcStartAngAndSwAng(double x1, double y1, double x2, double y2, double fA, double fs, double rx, double ry, double φ)
{
var matrix1 = new Matrix { M11 = Math.Cos(φ), M12 = Math.Sin(φ), M21 = -Math.Sin(φ), M22 = Math.Cos(φ) };
var matrix2 = new Matrix { M11 = (x1 - x2) / 2, M21 = (y1 - y2) / 2 };
var matrixX1Y1 = Matrix.Multiply(matrix1, matrix2);
var x1_ = matrixX1Y1.M11;
var y1_ = matrixX1Y1.M21;
var a = Math.Pow(rx, 2) * Math.Pow(ry, 2) - Math.Pow(rx, 2) * Math.Pow(y1_, 2) - Math.Pow(ry, 2) * Math.Pow(x1_, 2);
var b = Math.Pow(ry, 2) * Math.Pow(y1_, 2) Math.Pow(ry, 2) * Math.Pow(x1_, 2);
double c = 0;
if (fA == fs)
{
c = -Math.Sqrt(a / b);
}
else
{
c = Math.Sqrt(a / b);
}
var matrixCxCy = new Matrix { M11 = c * (rx * y1_ / ry), M21 = c * (-ry * x1_ / rx) };
var cx_ = matrixCxCy.M11;
var cy_ = matrixCxCy.M21;这时候我们通过矩阵运算得到了矩阵x1y1和矩阵cxcy，然后还有以下公式求开始角和摆动角：
那么代码如下：
代码语言：javascript复制 //求开始角
//cos<夹角> = 两向量之积 / 两向量模的乘积
//< 夹角 > = arcCos(两向量之积 / 两向量模的乘积)
//向量U的坐标
double vectorUx = 1;
double vectorUy = 0;
//向量V的坐标
double vectorVx = (x1_ - cx_) / rx;
double vectorVy = (y1_ - cy_) / ry;
var multiVectorUVectorV = vectorUx * vectorVx vectorUy * vectorVy; //两向量的乘积
var vectorUMod = Math.Sqrt(vectorUx * vectorUx vectorUy * vectorUy);//向量U的模
var vectorVMod = Math.Sqrt(vectorVx * vectorVx vectorVy * vectorVy);//向量V的模
var cosResult = multiVectorUVectorV / (vectorUMod * vectorVMod);
var startAngle = Math.Acos(cosResult) * 180 / Math.PI;
//求摆动角
//cos<夹角> = 两向量之积 / 两向量模的乘积
//< 夹角 > = arcCos(两向量之积 / 两向量模的乘积)
//向量U的坐标
vectorUx = (x1_ - cx_) / rx;
vectorUy = (y1_ - cy_) / ry;
//向量V的坐标
vectorVx = (-x1_ - cx_) / rx;
vectorVy = (-y1_ - cy_) / ry;
multiVectorUVectorV = vectorUx * vectorVx vectorUy * vectorVy; //两向量的乘积
vectorUMod = Math.Sqrt(vectorUx * vectorUx vectorUy * vectorUy);//向量U的模
vectorVMod = Math.Sqrt(vectorVx * vectorVx vectorVy * vectorVy);//向量V的模
cosResult = multiVectorUVectorV / (vectorUMod * vectorVMod);
var swAngle = Math.Acos(cosResult) * 180 / Math.PI;
if (fs == 0)
{
swAngle = -swAngle;
}
else
{
swAngle = Math.Abs(swAngle);
}那么我们来测试下，我准备了一段Arc字符串：
代码语言：javascript复制"M0,0 A18.10005249343832,16.00031496062992,60,0,0,-21.634424410598417,-21.472913522584044"然后测试代码如下：
代码语言：javascript复制 private void ButtonBase_OnClick(object sender, RoutedEventArgs e)
{
var pathGeometry = PathGeometry.CreateFromGeometry(Geometry.Parse("M0,0 A18.10005249343832,16.00031496062992,60,0,0,-21.634424410598417,-21.472913522584044"));
var pathFigure = pathGeometry.Figures[0];
if (pathFigure.Segments[0] is ArcSegment arcSegment)
{
var x1 = pathFigure.StartPoint.X;
var y1 = pathFigure.StartPoint.Y;
var rx = arcSegment.Size.Width;
var ry = arcSegment.Size.Height;
var φ = arcSegment.RotationAngle;
var fA = arcSegment.IsLargeArc ? 1 : 0;
var fs = arcSegment.SweepDirection is SweepDirection.Clockwise ? 1 : 0;
var x2 = arcSegment.Point.X;
var y2 = arcSegment.Point.Y;
var (startAngle, swAngle) = GetArcStartAngAndSwAng(x1, y1, x2, y2, fA, fs, rx, ry, φ);
//算出来接近startAngle为179°，swAngle为-118°
StringBuilder stringPath = new StringBuilder();
stringPath.Append($"M {x1} {y1}");
var openXmlArcToArcStrNew = SvgArcToArcStr(stringPath, rx, ry, φ, startAngle, swAngle, pathFigure.StartPoint);
this.NewPath.Data = Geometry.Parse(openXmlArcToArcStrNew);
}
}然后我们再通过求出来的开始角和摆动角求出之前的那段Arc:
代码语言：javascript复制 /// <summary>
/// OpenXml Arc 转为SVG Arc 字符串
/// </summary>
/// <param name="stringPath">路径字符串</param>
/// <param name="rx">椭圆半长轴</param>
/// <param name="ry">椭圆半短轴</param>
/// <param name="φ">旋转角</param>
/// <param name="stAng">起始角</param>
/// <param name="swAng">摆动角</param>
/// <param name="currentPoint">当前坐标</param>
/// <returns></returns>
private string SvgArcToArcStr(StringBuilder stringPath, double rx, double ry, double φ, double stAng, double swAng, Point currentPoint)
{
const string comma = ",";
var θ1 = stAng / 180 * Math.PI;
var Δθ = swAng / 180 * Math.PI;
//是否是大弧
var isLargeArcFlag = Math.Abs(Δθ) > Math.PI;
//是否是顺时针
var isClockwise = Δθ > 0;
//修复当椭圆弧线进行360°时，起始点和终点一样，会导致弧线变成点，因此-1°才进行计算
if (System.Math.Abs(Δθ) == 2 * System.Math.PI)
{
Δθ = Δθ - Δθ / 360;
}
//获取终点坐标
var pt = GetArcArbitraryPoint(rx, ry, Δθ, θ1, φ, currentPoint);
currentPoint = pt;
// 格式如下
// A rx ry x-axis-rotation large-arc-flag sweep-flag x y
// 这里 large-arc-flag 是 1 和 0 表示
stringPath.Append("A")
.Append(rx) //rx
.Append(comma)
.Append(ry) //ry
.Append(comma)
.Append(φ) // x-axis-rotation
.Append(comma)
.Append(isLargeArcFlag ? "1" : "0") //large-arc-flag
.Append(comma)
.Append(isClockwise ? "1" : "0") // sweep-flag
.Append(comma)
.Append(pt.X)
.Append(comma)
.Append(pt.Y)
.Append(' ');
return stringPath.ToString();
}
/// <summary>
/// 获取椭圆任意一点坐标(终点)
/// </summary>
/// <param name="rx">椭圆半长轴</param>
/// <param name="ry">椭圆半短轴</param>
/// <param name="Δθ">摆动角度(起始角的摆动角度，也就是起始角 摆动角=结束角)</param>
/// <param name="θ1">起始角</param>
/// <param name="φ">旋转角</param>
/// <param name="currentPoint">起点</param>
/// <returns></returns>
private static Point GetArcArbitraryPoint(double rx, double ry, double Δθ, double θ1, double φ, Point currentPoint)
{
//开始点的椭圆任意一点的二维矩阵方程式
var matrixX1Y1 = new Matrix { M11 = currentPoint.X, M21 = currentPoint.Y };
var matrix1 = new Matrix { M11 = Math.Cos(φ), M12 = -Math.Sin(φ), M21 = Math.Sin(φ), M22 = Math.Cos(φ) };
var matrix2 = new Matrix { M11 = rx * Math.Cos(θ1), M21 = ry * Math.Sin(θ1) };
var multiplyMatrix1Matrix2 = Matrix.Multiply(matrix1, matrix2);
var matrixCxCy = new Matrix { M11 = matrixX1Y1.M11 - multiplyMatrix1Matrix2.M11, M21 = matrixX1Y1.M21 - multiplyMatrix1Matrix2.M21 };
//终点的椭圆任意一点的二维矩阵方程式
var matrix3 = new Matrix { M11 = rx * Math.Cos(θ1 Δθ), M21 = ry * Math.Sin(θ1 Δθ) };
var multiplyMatrix1Matrix3 = Matrix.Multiply(matrix1, matrix3);
var matrixX2Y2 = new Matrix { M11 = multiplyMatrix1Matrix3.M11 matrixCxCy.M11, M21 = multiplyMatrix1Matrix3.M21 matrixCxCy.M21 };
return new Point(matrixX2Y2.M11, matrixX2Y2.M21);
}效果如下：
可以看到根据算出来的开始角和摆动角，再带入计算出来的弧线(关于计算弧线的算法可以参考我之前的博客)是跟之前的弧线一致的，也间接验证了算法的准确性
求Arc的椭圆圆心
求圆心公式如下：
则代码如下：
代码语言：javascript复制 /// <summary>
/// 获取弧线的椭圆圆心
/// </summary>
/// <param name="x1">起点X</param>
/// <param name="y1">起点Y</param>
/// <param name="x2">终点X</param>
/// <param name="y2">终点Y</param>
/// <param name="fA">优劣弧:1 优弧 0劣弧</param>
/// <param name="fs">顺逆时针绘制：1 顺时针 0 逆时针</param>
/// <param name="rx">椭圆半长轴</param>
/// <param name="ry">椭圆半短轴</param>
/// <param name="φ">旋转角</param>
/// <returns></returns>
private static Point GetArcCenterPoint(double x1, double y1, double x2, double y2, double fA, double fs, double rx, double ry, double φ)
{
var matrix1 = new Matrix { M11 = Math.Cos(φ), M12 = Math.Sin(φ), M21 = -Math.Sin(φ), M22 = Math.Cos(φ) };
var matrix2 = new Matrix { M11 = (x1 - x2) / 2, M21 = (y1 - y2) / 2 };
var matrixX1Y1 = Matrix.Multiply(matrix1, matrix2);
var x1_ = matrixX1Y1.M11;
var y1_ = matrixX1Y1.M21;
var a = Math.Pow(rx, 2) * Math.Pow(ry, 2) - Math.Pow(rx, 2) * Math.Pow(y1_, 2) - Math.Pow(ry, 2) * Math.Pow(x1_, 2);
var b = Math.Pow(ry, 2) * Math.Pow(y1_, 2) Math.Pow(ry, 2) * Math.Pow(x1_, 2);
double c = 0;
if (fA == fs)
{
c = -Math.Sqrt(a / b);
}
else
{
c = Math.Sqrt(a / b);
}
var matrixCx_Cy_ = new Matrix { M11 = c * (rx * y1_ / ry), M21 = c * (-ry * x1_ / rx) };
var tempMatrix = new Matrix { M11 = Math.Cos(φ), M12 = -Math.Sin(φ), M21 = Math.Sin(φ), M22 = Math.Cos(φ) };
var multiplyMatrix = Matrix.Multiply(tempMatrix, matrixCx_Cy_);
var matrixCxCy=new Matrix(){M11 = multiplyMatrix.M11 ((x1 x2)/2),M21= multiplyMatrix.M21 ((y1 y2)/2) };
return new Point(matrixCxCy.M11, matrixCxCy.M21);
}最终通过上面Svg Arc字符串算出来的椭圆圆心为(-17.42169108128391,-5.368374418803782)
源码
BlogCodeSample/OpenxmlActToSvgSample at main · ZhengDaoWang/BlogCodeSample
参考
Implementation Notes — SVG 2
