文章目录- 问题抛出
- 结构设计
- 实际节点
- 基本操作
- 增
- 重新编码
- 解析数据
- 重新分配空间
- 接入数据
- 实际节点
- 增
- 重新编码
- 解析数据
- 重新分配空间
- 接入数据
问题抛出
用过 Python 的列表吗？就是那种可以存储任意类型数据的，支持随机读取的数据结构。 没有用过的话那就没办法了。
本质上这种列表可以使用数组、链表作为其底层结构，不知道Python中的列表是以什么作为底层结构的。 但是redis的列表既不是用链表，也不是用数组作为其底层实现的，原因也显而易见：数组不方便，弄个二维的？柔性的？怎么写？链表可以实现，通用链表嘛，数据域放 void* 就可以实现列表功能。但是，链表的缺点也很明显，容易造成内存碎片。
在这个大环境下，秉承着“能省就省”的指导思想，请你设计一款数据结构。
结构设计
这个图里要注意，右侧是没有记录“当前元素的大小”的
这个图挺详细哈，都省得我对每一个字段释义了，整挺好。
其他话，文件开头的注释也讲的很清楚了。（ziplist.c）
代码语言：javascript复制/* The ziplist is a specially encoded dually linked list that is designed
* to be very memory efficient. It stores both strings and integer values,
* where integers are encoded as actual integers instead of a series of
* characters. It allows push and pop operations on either side of the list
* in O(1) time. However, because every operation requires a reallocation of
* the memory used by the ziplist, the actual complexity is related to the
* amount of memory used by the ziplist.
*
* ----------------------------------------------------------------------------
*
* ZIPLIST OVERALL LAYOUT
* ======================
*
* The general layout of the ziplist is as follows:
*
* <zlbytes> <zltail> <zllen> <entry> <entry> ... <entry> <zlend>
*
* NOTE: all fields are stored in little endian, if not specified otherwise.
*
* <uint32_t zlbytes> is an unsigned integer to hold the number of bytes that
* the ziplist occupies, including the four bytes of the zlbytes field itself.
* This value needs to be stored to be able to resize the entire structure
* without the need to traverse it first.
*
* <uint32_t zltail> is the offset to the last entry in the list. This allows
* a pop operation on the far side of the list without the need for full
* traversal.
*
* <uint16_t zllen> is the number of entries. When there are more than
* 2^16-2 entries, this value is set to 2^16-1 and we need to traverse the
* entire list to know how many items it holds.
*
* <uint8_t zlend> is a special entry representing the end of the ziplist.
* Is encoded as a single byte equal to 255. No other normal entry starts
* with a byte set to the value of 255.
*
* ZIPLIST ENTRIES
* ===============
*
* Every entry in the ziplist is prefixed by metadata that contains two pieces
* of information. First, the length of the previous entry is stored to be
* able to traverse the list from back to front. Second, the entry encoding is
* provided. It represents the entry type, integer or string, and in the case
* of strings it also represents the length of the string payload.
* So a complete entry is stored like this:
*
* <prevlen> <encoding> <entry-data>
*
* Sometimes the encoding represents the entry itself, like for small integers
* as we'll see later. In such a case the <entry-data> part is missing, and we
* could have just:
*
* <prevlen> <encoding>
*
* The length of the previous entry, <prevlen>, is encoded in the following way:
* If this length is smaller than 254 bytes, it will only consume a single
* byte representing the length as an unsinged 8 bit integer. When the length
* is greater than or equal to 254, it will consume 5 bytes. The first byte is
* set to 254 (FE) to indicate a larger value is following. The remaining 4
* bytes take the length of the previous entry as value.
*
* So practically an entry is encoded in the following way:
*
* <prevlen from 0 to 253> <encoding> <entry>
*
* Or alternatively if the previous entry length is greater than 253 bytes
* the following encoding is used:
*
* 0xFE <4 bytes unsigned little endian prevlen> <encoding> <entry>
*
* The encoding field of the entry depends on the content of the
* entry. When the entry is a string, the first 2 bits of the encoding first
* byte will hold the type of encoding used to store the length of the string,
* followed by the actual length of the string. When the entry is an integer
* the first 2 bits are both set to 1. The following 2 bits are used to specify
* what kind of integer will be stored after this header. An overview of the
* different types and encodings is as follows. The first byte is always enough
* to determine the kind of entry.
*
* |00pppppp| - 1 byte
* String value with length less than or equal to 63 bytes (6 bits).
* "pppppp" represents the unsigned 6 bit length.
* |01pppppp|qqqqqqqq| - 2 bytes
* String value with length less than or equal to 16383 bytes (14 bits).
* IMPORTANT: The 14 bit number is stored in big endian.
* |10000000|qqqqqqqq|rrrrrrrr|ssssssss|tttttttt| - 5 bytes
* String value with length greater than or equal to 16384 bytes.
* Only the 4 bytes following the first byte represents the length
* up to 2^32-1. The 6 lower bits of the first byte are not used and
* are set to zero.
* IMPORTANT: The 32 bit number is stored in big endian.
* |11000000| - 3 bytes
* Integer encoded as int16_t (2 bytes).
* |11010000| - 5 bytes
* Integer encoded as int32_t (4 bytes).
* |11100000| - 9 bytes
* Integer encoded as int64_t (8 bytes).
* |11110000| - 4 bytes
* Integer encoded as 24 bit signed (3 bytes).
* |11111110| - 2 bytes
* Integer encoded as 8 bit signed (1 byte).
* |1111xxxx| - (with xxxx between 0000 and 1101) immediate 4 bit integer.
* Unsigned integer from 0 to 12. The encoded value is actually from
* 1 to 13 because 0000 and 1111 can not be used, so 1 should be
* subtracted from the encoded 4 bit value to obtain the right value.
* |11111111| - End of ziplist special entry.
*
* Like for the ziplist header, all the integers are represented in little
* endian byte order, even when this code is compiled in big endian systems.
*
* EXAMPLES OF ACTUAL ZIPLISTS
* ===========================
*
* The following is a ziplist containing the two elements representing
* the strings "2" and "5". It is composed of 15 bytes, that we visually
* split into sections:
*
* [0f 00 00 00] [0c 00 00 00] [02 00] [00 f3] [02 f6] [ff]
* | | | | | |
* zlbytes zltail entries "2" "5" end
*
* The first 4 bytes represent the number 15, that is the number of bytes
* the whole ziplist is composed of. The second 4 bytes are the offset
* at which the last ziplist entry is found, that is 12, in fact the
* last entry, that is "5", is at offset 12 inside the ziplist.
* The next 16 bit integer represents the number of elements inside the
* ziplist, its value is 2 since there are just two elements inside.
* Finally "00 f3" is the first entry representing the number 2. It is
* composed of the previous entry length, which is zero because this is
* our first entry, and the byte F3 which corresponds to the encoding
* |1111xxxx| with xxxx between 0001 and 1101. We need to remove the "F"
* higher order bits 1111, and subtract 1 from the "3", so the entry value
* is "2". The next entry has a prevlen of 02, since the first entry is
* composed of exactly two bytes. The entry itself, F6, is encoded exactly
* like the first entry, and 6-1 = 5, so the value of the entry is 5.
* Finally the special entry FF signals the end of the ziplist.
*
* Adding another element to the above string with the value "Hello World"
* allows us to show how the ziplist encodes small strings. We'll just show
* the hex dump of the entry itself. Imagine the bytes as following the
* entry that stores "5" in the ziplist above:
*
* [02] [0b] [48 65 6c 6c 6f 20 57 6f 72 6c 64]
*
* The first byte, 02, is the length of the previous entry. The next
* byte represents the encoding in the pattern |00pppppp| that means
* that the entry is a string of length <pppppp>, so 0B means that
* an 11 bytes string follows. From the third byte (48) to the last (64)
* there are just the ASCII characters for "Hello World".
*
* ----------------------------------------------------------------------------
*
* Copyright (c) 2009-2012, Pieter Noordhuis <pcnoordhuis at gmail dot com>
* Copyright (c) 2009-2017, Salvatore Sanfilippo <antirez at gmail dot com>
* All rights reserved.
*/看完了么？接下来就是基操阶段了，对于任何一种数据结构，基操无非增删查改。
实际节点
代码语言：javascript复制typedef struct zlentry {
unsigned int prevrawlensize; /* Bytes used to encode the previous entry len*/
unsigned int prevrawlen; /* Previous entry len. */
unsigned int lensize; /* Bytes used to encode this entry type/len.
For example strings have a 1, 2 or 5 bytes
header. Integers always use a single byte.*/
unsigned int len; /* Bytes used to represent the actual entry.
For strings this is just the string length
while for integers it is 1, 2, 3, 4, 8 or
0 (for 4 bit immediate) depending on the
number range. */
unsigned int headersize; /* prevrawlensize lensize. */
unsigned char encoding; /* Set to ZIP_STR_* or ZIP_INT_* depending on
the entry encoding. However for 4 bits
immediate integers this can assume a range
of values and must be range-checked. */
unsigned char *p; /* Pointer to the very start of the entry, that
is, this points to prev-entry-len field. */
} zlentry;基本操作
我觉得这张图还是要再摆一下：
这个图里要注意，右侧是没有记录“当前元素的大小”的
增
真实插入的是这个函数：
讲真，头皮有点发麻。那么我们等下还是用老套路，按步骤拆开来看。
代码语言：javascript复制/* Insert item at "p". */
unsigned char *__ziplistInsert(unsigned char *zl, unsigned char *p, unsigned char *s, unsigned int slen) {
size_t curlen = intrev32ifbe(ZIPLIST_BYTES(zl)), reqlen;
unsigned int prevlensize, prevlen = 0;
size_t offset;
int nextdiff = 0;
unsigned char encoding = 0;
long long value = 123456789; /* initialized to avoid warning. Using a value
that is easy to see if for some reason
we use it uninitialized. */
zlentry tail;
/* Find out prevlen for the entry that is inserted. */
if (p[0] != ZIP_END) {
ZIP_DECODE_PREVLEN(p, prevlensize, prevlen);
} else {
unsigned char *ptail = ZIPLIST_ENTRY_TAIL(zl);
if (ptail[0] != ZIP_END) {
prevlen = zipRawEntryLength(ptail);
}
}
/* See if the entry can be encoded */
if (zipTryEncoding(s,slen,&value,&encoding)) {
/* 'encoding' is set to the appropriate integer encoding */
reqlen = zipIntSize(encoding);
} else {
/* 'encoding' is untouched, however zipStoreEntryEncoding will use the
* string length to figure out how to encode it. */
reqlen = slen;
}
/* We need space for both the length of the previous entry and
* the length of the payload. */
reqlen = zipStorePrevEntryLength(NULL,prevlen);
reqlen = zipStoreEntryEncoding(NULL,encoding,slen);
/* When the insert position is not equal to the tail, we need to
* make sure that the next entry can hold this entry's length in
* its prevlen field. */
int forcelarge = 0;
nextdiff = (p[0] != ZIP_END) ? zipPrevLenByteDiff(p,reqlen) : 0;
if (nextdiff == -4 && reqlen < 4) {
nextdiff = 0;
forcelarge = 1;
}
/* Store offset because a realloc may change the address of zl. */
offset = p-zl;
zl = ziplistResize(zl,curlen reqlen nextdiff);
p = zl offset;
/* Apply memory move when necessary and update tail offset. */
if (p[0] != ZIP_END) {
/* Subtract one because of the ZIP_END bytes */
memmove(p reqlen,p-nextdiff,curlen-offset-1 nextdiff);
/* Encode this entry's raw length in the next entry. */
if (forcelarge)
zipStorePrevEntryLengthLarge(p reqlen,reqlen);
else
zipStorePrevEntryLength(p reqlen,reqlen);
/* Update offset for tail */
ZIPLIST_TAIL_OFFSET(zl) =
intrev32ifbe(intrev32ifbe(ZIPLIST_TAIL_OFFSET(zl)) reqlen);
/* When the tail contains more than one entry, we need to take
* "nextdiff" in account as well. Otherwise, a change in the
* size of prevlen doesn't have an effect on the *tail* offset. */
zipEntry(p reqlen, &tail);
if (p[reqlen tail.headersize tail.len] != ZIP_END) {
ZIPLIST_TAIL_OFFSET(zl) =
intrev32ifbe(intrev32ifbe(ZIPLIST_TAIL_OFFSET(zl)) nextdiff);
}
} else {
/* This element will be the new tail. */
ZIPLIST_TAIL_OFFSET(zl) = intrev32ifbe(p-zl);
}
/* When nextdiff != 0, the raw length of the next entry has changed, so
* we need to cascade the update throughout the ziplist */
if (nextdiff != 0) {
offset = p-zl;
zl = __ziplistCascadeUpdate(zl,p reqlen);
p = zl offset;
}
/* Write the entry */
p = zipStorePrevEntryLength(p,prevlen);
p = zipStoreEntryEncoding(p,encoding,slen);
if (ZIP_IS_STR(encoding)) {
memcpy(p,s,slen);
} else {
zipSaveInteger(p,value,encoding);
}
ZIPLIST_INCR_LENGTH(zl,1);
return zl;
}对“链表”插入数据有几个步骤？ 1、偏移 2、插进去 3、缝合
那这个“列表”，比较特殊一点，特殊在哪里？特殊在它比较紧凑，而且数据类型，其实也就两种，要么integer，要么string。所以它的步骤是？ 1、数据重新编码 2、解析数据并分配空间 3、接入数据
重新编码
什么是重新编码？插入一个元素，是不是需要对：“前一个元素的大小、本身大小、当前元素编码” 这些数据进行一个统计，然后一并插入。就编这个。
插入位置无非三个，头中尾。 头：前一个元素大小为0，因为前面没有元素。 中：待插入位置后一个元素记录的“前一个元素大小”，当然，之后本身大小就成为了后一个元素眼中的“前一个元素大小”。 尾：那就要把三个字段加起来了。
具体怎么重新编码就不看了吧，这篇本来就已经很长了。
解析数据
再往下就是解析数据了。 首先尝试将数据解析为整数，如果可以解析，就按照压缩列表整数类型编码存储；如果解析失败，就按照压缩列表字节数组类型编码存储。
解析之后，数值存储在 value 中，编码格式存储在 encoding中。如果解析成功，还要计算整数所占字节数。变量 reqlen 存储当前元素所需空间大小，再累加其他两个字段的空间大小，就是本节点所需空间大小了。
重新分配空间
看注释这架势，咋滴，还存在没地方给它塞？
来我们看看。
这里的分配空间不是简单的就新插进来的数据多少空间就分配多少，如果没有仔细阅读上面那段英文的话，嗯，可以选择绕回去仔细阅读一下那个节点组成。特别是那个：
代码语言：javascript复制/*
* The length of the previous entry, <prevlen>, is encoded in the following way:
* If this length is smaller than 254 bytes, it will only consume a single
* byte representing the length as an unsinged 8 bit integer. When the length
* is greater than or equal to 254, it will consume 5 bytes. The first byte is
* set to 254 (FE) to indicate a larger value is following. The remaining 4
* bytes take the length of the previous entry as value.
*/所以这个 previous 就是个不确定因素。有可能人家本来是 1 1 排列的，中间插进来一个之后变成 1 1 5 排列了；也有可能人家是1 5 排列的、5 1 排列的，总之就是不确定。
所以，在 entryX 的位置插入一个数据之后，entryX 1 的 previous 可能不变，可能加四，也可能减四，谁也说不准。说不准那不就得测一下嘛。所以就测一下，仅此而已。
接入数据
数据怎么接入？鉴于这里真心不是链表，是列表。 所以，按数组那一套来。对。
很麻烦吧。其实不麻烦，你在redis里见过它给你中间插入的机会了吗？更不要说头插了，你见过它给你头插的机会了吗？
插个题外话：大数据插入时，数组不一定输给链表。在尾插的时候，数组的优势是远超链表的（当然，仅限于尾插）。在我两个月前的博客里有做过这一系列的实验。
删就不写了吧，增的逆操作，从系列开始就没写过删。不过这里删就不可避免的大量数据进行复制了（如果不真删，只是做个删除标志呢？这样会省时间，但是时候会造成内存碎片化。不过可以设计一个定期调整内存的函数，比方说重用三分之一的块之后紧凑一下？内存不够用的时候紧凑一下？STL就是这么干的）。
查也没啥好讲的了吧，这个数据结构的应用场景一般就是对键进行检索，这里就是个值，不一样的是这个值是一串的。 所以除了提供原有的前后向遍历之外，还提供了 range 查询，不难的。
