微服务环境部署

2022-01-22 10:42:45 浏览数 (1)

zookeeper

zookeeper安装配置

  • 从官网下载zookeeper的安装包:官网推荐的zookeeper镜像下载网站
  • 将zookeeper的压缩包解压到指定安装目录
  • 在zookeeper安装目录新建 data 和 log 文件夹,将conf目录下的 zoo_sample.cfg 文件，复制一份，重命名为 zoo.cfg ,在zoo.cfg 中配置tickTime, dataDir, dataLogDir.
代码语言：javascript复制
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial 
# synchronization phase can take
#initLimit=10
# The number of ticks that can pass between 
# sending a request and getting an acknowledgement
#syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just 
# example sakes.
dataDir=E:JetBrainszookeeper-3.4.10data
dataLogDir=E:JetBrainszookeeper-3.4.10log
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#
# Be sure to read the maintenance section of the 
# administrator guide before turning on autopurge.
#
# http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
#
# The number of snapshots to retain in dataDir
#autopurge.snapRetainCount=3
# Purge task interval in hours
# Set to "0" to disable auto purge feature
#autopurge.purgeInterval=1

注:各个配置属性说明

代码语言：javascript复制
tickTime：这个时间是作为 Zookeeper 服务器之间或客户端与服务器之间维持心跳的时间间隔，也就是每个 tickTime 时间就会发送一个心跳。
initLimit：这个配置项是用来配置 Zookeeper 接受客户端（这里所说的客户端不是用户连接 Zookeeper 服务器的客户端，而是 Zookeeper 服务器集群中连接到 Leader 的 Follower 服务器）初始化连接时最长能忍受多少个心跳时间间隔数。当已经超过 10 个心跳的时间（也就是 tickTime）长度后 Zookeeper 服务器还没有收到客户端的返回信息，那么表明这个客户端连接失败。总的时间长度就是 5*2000=10 秒
syncLimit：这个配置项标识 Leader 与 Follower 之间发送消息，请求和应答时间长度，最长不能超过多少个 tickTime 的时间长度，总的时间长度就是 2*2000=4 秒
dataDir：顾名思义就是 Zookeeper 保存数据的目录，默认情况下，Zookeeper 将写数据的日志文件也保存在这个目录里。
clientPort：这个端口就是客户端连接 Zookeeper 服务器的端口，Zookeeper 会监听这个端口，接受客户端的访问请求。
  • 配置环境变量
代码语言：javascript复制
1.添加系统变量 ZOOKEEPER_HOME:E:JetBrainszookeeper-3.4.10
2.新建在Path变量 Path:%ZOOKEEPER_HOME%/bin;%ZOOKEEPER_HOME%/conf
  • 点击 E:JetBrainszookeeper-3.4.10bin目录下的 zkServer.cmd运行zookeeper即可运行成功.

zookeeper运行问题

  • 在我的工作电脑上,使用的zookeeper中配置了windows批处理工具,只需要点击RUN即可完成所有配置并运行:
  • 以后需要学习一下windows批处理工具

node.js(npm)

node.js(npm)安装配置

  • 从官网下载node.js的安装包:node.js官网下载
  • 双击安装包,开始安装node.js
  • node.js安装结束后,打开cmd窗口,输入node -v,npm -v测试node.js是否安装成功
代码语言：javascript复制
C:UsersChova>node -v
C:UsersChova>npm -v
  • node.js中npm的配置:在node.js安装目录下创建node_cache和node_global文件夹，设置为全局安装位置和缓存位置.打开cmd命令窗口，输入
代码语言：javascript复制
npm config set prefix  E:JetBrainsnodejsnode_global  
npm config set cache E:JetBrainsnodejsnode_cache
  • 配置node.js的环境变量
代码语言：javascript复制
1.在 系统变量 下新建 NODE_PATH ,输入E:JetBrainsnodejnode_globalnode_modules
2.将 用户变量 下的 Path 修改为 E:JetBrainsnodejnode_global

node.js(npm)运行问题

  • 在使用
代码语言：javascript复制
npm start

问题一:运行node.js项目时,出现以下报错

代码语言：javascript复制
A complete log of this run can be found in:
C:Users56386AppDataRoamingnpm-cache_logs2019-04-26T02_09_33_735Z-debug.log
  • 解决办法:
代码语言：javascript复制
npm i npm -g	全局更新

或者

npm cache clean --force		清理后重新安装

或者

npm install webpack --save		强制安装依赖

问题二:运行有webpack提示,缺少webpack插件

  • 解决办法:
代码语言：javascript复制
npm install webpack@3.6.0 -g

npm i optimize-css-assets-webpack-plugin@3.2.0

如果解决成功后,在package.json中的dependencies中会有"webpack": "^3.6.0",如果还是没有相关依赖,则最终执行

代码语言：javascript复制
npm install webpack --save		# 强制安装依赖

redis

redis安装配置

  • 从GitHub上下载3.2版本的redis安装包:redis
  • 安装完成后,默认已经开启redis服务.也可以在cmd窗口输入启动命令
代码语言：javascript复制
C:UsersChova>redis-server.exe

因为默认开启的redis服务已经使用了6379,使用cmd窗口启动redis时需要关闭windows服务中的redis服务.

  • redis中各个文件介绍
代码语言：javascript复制
redis-server.exe：服务端程序，提供redis服务
redis-cli.exe: 客户端程序，通过它连接redis服务并进行操作
redis-check-dump.exe：本地数据库检查
redis-check-aof.exe：更新日志检查
redis-benchmark.exe：性能测试，用以模拟同时由N个客户端发送M个 SETs/GETs 查询 (类似于 Apache 的ab 工具).
redis.windows.conf: 配置文件，将redis作为普通软件使用的配置，命令行关闭则redis关闭
redis.windows-service.conf：配置文件，将redis作为系统服务的配置，用以区别开两种不同的使用方式

redis运行问题

  • 如果redis是压缩包安装的,启动命令需要输入:
代码语言：javascript复制
redis-server.exe redis.windows.conf
  • 通过
代码语言：javascript复制
redis-server.exe redis.windows.conf

mongodb

mongodb安装配置

  • 从官网下载mongdb安装包:mongodb官网,下载windows64位:win64-mongodbb
  • 双击mongodb安装包,安装到指定目录
  • 配置mongodb环境变量
  • mongodb简单使用介绍
代码语言：javascript复制
mongo   使用数据库
mongod  开机
mongoimport  导入数据

开机命令:(开机完成后,这个cmd窗口就保持这样)
mongod --dpath c:mongo

新开一个cmd窗口输入:
mongo

运行数据库语法:
show dbs	列出所有数据库
use dbname	使用数据库
db			查看当前所在数据库
db.dbname.insert({});	插入数据
db.dropDatabase();		删除数据库，删除当前所在的数据库

db.restaurants.find();	查找数据，用find。find中没有参数，那么将列出这个集合的所有文档
db.dbname.find({"score.shuxue":70});	精确匹配
db.dbname.find({"score.shuxue":70 , "age":12});		多个条件
db.dbname.find({"score.yuwen":{$gt:50}});			大于条件	
db.dbname.find({$or:[{"age":9},{"age":11}]});		寻找所有年龄是9岁，或者11岁的
db.dbname.find().sort({ "borough": 1, "address.zipcode": 1 })	查找完毕之后，打点调用sort，表示升降排序

db.dbname.update({"name":"小明"},{$set:{"age":16}});			查找名字叫做小明的，把年龄更改为16岁
db.dbname.update({"score.shuxue":70},{$set:{"age":33}});		查找数学成绩是70，把年龄更改为33岁
db.dbname.update({"sex":"男"},{$set:{"age":33}},{multi: true});	更改所有匹配项目
db.restaurants.remove( { "borough": "Manhattan" } );			删除数据

maven配置

  • IDEA中的maven配置,配置为本地的maven
  • 配置maven的配置文件
代码语言：javascript复制
E:JetBrainsmavenapache-maven-3.6.1confsettings.xml
代码语言：javascript复制
<?xml version="1.0" encoding="UTF-8"?>

<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements.  See the NOTICE file
distributed with this work for additional information
regarding copyright ownership.  The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License.  You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied.  See the License for the
specific language governing permissions and limitations
under the License.
-->

<!--
 | This is the configuration file for Maven. It can be specified at two levels:
 |
 |  1. User Level. This settings.xml file provides configuration for a single user,
 |                 and is normally provided in ${user.home}/.m2/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -s /path/to/user/settings.xml
 |
 |  2. Global Level. This settings.xml file provides configuration for all Maven
 |                 users on a machine (assuming they're all using the same Maven
 |                 installation). It's normally provided in
 |                 ${maven.home}/conf/settings.xml.
 |
 |                 NOTE: This location can be overridden with the CLI option:
 |
 |                 -gs /path/to/global/settings.xml
 |
 | The sections in this sample file are intended to give you a running start at
 | getting the most out of your Maven installation. Where appropriate, the default
 | values (values used when the setting is not specified) are provided.
 |
 |-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
  <!-- localRepository
   | The path to the local repository maven will use to store artifacts.
   |
   | Default: ${user.home}/.m2/repository
  <localRepository>/path/to/local/repo</localRepository>
  -->
<localRepository>D:/maven-XD/repository</localRepository>
  <!-- interactiveMode
   | This will determine whether maven prompts you when it needs input. If set to false,
   | maven will use a sensible default value, perhaps based on some other setting, for
   | the parameter in question.
   |
   | Default: true
  <interactiveMode>true</interactiveMode>
  -->

  <!-- offline
   | Determines whether maven should attempt to connect to the network when executing a build.
   | This will have an effect on artifact downloads, artifact deployment, and others.
   |
   | Default: false
  <offline>false</offline>
  -->

  <!-- pluginGroups
   | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
   | when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
   | "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
   |-->
  <pluginGroups>
    <!-- pluginGroup
     | Specifies a further group identifier to use for plugin lookup.
    <pluginGroup>com.your.plugins</pluginGroup>
    -->
  </pluginGroups>

  <!-- proxies
   | This is a list of proxies which can be used on this machine to connect to the network.
   | Unless otherwise specified (by system property or command-line switch), the first proxy
   | specification in this list marked as active will be used.
   |-->
  <proxies>
    <!-- proxy
     | Specification for one proxy, to be used in connecting to the network.
     |
    <proxy>
      <id>optional</id>
      <active>true</active>
      <protocol>http</protocol>
      <username>proxyuser</username>
      <password>proxypass</password>
      <host>proxy.host.net</host>
      <port>80</port>
      <nonProxyHosts>local.net|some.host.com</nonProxyHosts>
    </proxy>
    -->
  </proxies>

  <!-- servers
   | This is a list of authentication profiles, keyed by the server-id used within the system.
   | Authentication profiles can be used whenever maven must make a connection to a remote server.
   |-->
  <servers>
    <!-- server
     | Specifies the authentication information to use when connecting to a particular server, identified by
     | a unique name within the system (referred to by the 'id' attribute below).
     |
     | NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
     |       used together.
     |
    <server>
      <id>deploymentRepo</id>
      <username>repouser</username>
      <password>repopwd</password>
    </server>
    -->
		<server>
			<id>tomcat7</id>
			<username>admin</username>
			<password>admin</password>
		</server>
    <!-- Another sample, using keys to authenticate.
    <server>
      <id>siteServer</id>
      <privateKey>/path/to/private/key</privateKey>
      <passphrase>optional; leave empty if not used.</passphrase>
    </server>
    -->
	    <server>
            <id>nexus-public</id>  
            <username>admin</username>  
            <password>admin123</password>  
        </server>
		<server>
            <id>3rd</id>  
            <username>admin</username>  
            <password>admin123</password>  
        </server>
		<server>
            <id>nexus-releases</id>  
            <username>admin</username>  
            <password>admin123</password>  
        </server>
		<server>
            <id>nexus-snapshots</id>  
            <username>admin</username>  
            <password>admin123</password>  
        </server>
  </servers>

  <!-- mirrors
   | This is a list of mirrors to be used in downloading artifacts from remote repositories.
   |
   | It works like this: a POM may declare a repository to use in resolving certain artifacts.
   | However, this repository may have problems with heavy traffic at times, so people have mirrored
   | it to several places.
   |
   | That repository definition will have a unique id, so we can create a mirror reference for that
   | repository, to be used as an alternate download site. The mirror site will be the preferred
   | server for that repository.
   |-->
  <mirrors>
    <!-- mirror
     | Specifies a repository mirror site to use instead of a given repository. The repository that
     | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
     | for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
     |
    <mirror>
      <id>mirrorId</id>
      <mirrorOf>repositoryId</mirrorOf>
      <name>Human Readable Name for this Mirror.</name>
      <url>http://my.repository.com/repo/path</url>
    </mirror>
     -->
	  <!--  <mirror>
                        <id>nexus-aliyun</id>
                        <mirrorOf>*,!jeecg,!jeecg-snapshots</mirrorOf>
                        <name>Nexus aliyun</name>
                        <url>http://maven.aliyun.com/nexus/content/groups/public</url>
        </mirror>  -->
	
	 <!--<repository>
        <id>repository.springframework.maven.milestone</id>
        <name>Spring Framework Maven Milestone Repository</name>
        <url>http://repo.spring.io/milestone/</url>
    </repository>-->
	 <mirror>
      <id>nexus-public</id>
      <name>nexus-public</name>
      <url>http://47.97.168.188:8888/nexus/content/groups/public/</url>
      <mirrorOf>*</mirrorOf>        
    </mirror> 
   <mirror>
      <id>alimaven</id>
      <name>aliyun maven</name>
      <url>http://maven.aliyun.com/nexus/content/groups/public/</url>
      <mirrorOf>central</mirrorOf>        
    </mirror> 
	<mirror>
      <id>3rd</id>
      <name>3rd</name>
      <url>http://47.97.168.188:8888/nexus/content/repositories/thirdparty/</url>
      <mirrorOf>*</mirrorOf>        
    </mirror> 
	
	
  </mirrors>

  <!-- profiles
   | This is a list of profiles which can be activated in a variety of ways, and which can modify
   | the build process. Profiles provided in the settings.xml are intended to provide local machine-
   | specific paths and repository locations which allow the build to work in the local environment.
   |
   | For example, if you have an integration testing plugin - like cactus - that needs to know where
   | your Tomcat instance is installed, you can provide a variable here such that the variable is
   | dereferenced during the build process to configure the cactus plugin.
   |
   | As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
   | section of this document (settings.xml) - will be discussed later. Another way essentially
   | relies on the detection of a system property, either matching a particular value for the property,
   | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
   | value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
   | Finally, the list of active profiles can be specified directly from the command line.
   |
   | NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
   |       repositories, plugin repositories, and free-form properties to be used as configuration
   |       variables for plugins in the POM.
   |
   |-->
  <profiles>
  
  
    <!-- profile
     | Specifies a set of introductions to the build process, to be activated using one or more of the
     | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
     | or the command line, profiles have to have an ID that is unique.
     |
     | An encouraged best practice for profile identification is to use a consistent naming convention
     | for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
     | This will make it more intuitive to understand what the set of introduced profiles is attempting
     | to accomplish, particularly when you only have a list of profile id's for debug.
     |
     | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
    <profile>
      <id>jdk-1.4</id>

      <activation>
        <jdk>1.4</jdk>
      </activation>

      <repositories>
        <repository>
          <id>jdk14</id>
          <name>Repository for JDK 1.4 builds</name>
          <url>http://www.myhost.com/maven/jdk14</url>
          <layout>default</layout>
          <snapshotPolicy>always</snapshotPolicy>
        </repository>
      </repositories>
    </profile>
    -->

    <!--
     | Here is another profile, activated by the system property 'target-env' with a value of 'dev',
     | which provides a specific path to the Tomcat instance. To use this, your plugin configuration
     | might hypothetically look like:
     |
     | ...
     | <plugin>
     |   <groupId>org.myco.myplugins</groupId>
     |   <artifactId>myplugin</artifactId>
     |
     |   <configuration>
     |     <tomcatLocation>${tomcatPath}</tomcatLocation>
     |   </configuration>
     | </plugin>
     | ...
     |
     | NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
     |       anything, you could just leave off the <value/> inside the activation-property.
     |
    <profile>
      <id>env-dev</id>

      <activation>
        <property>
          <name>target-env</name>
          <value>dev</value>
        </property>
      </activation>

      <properties>
        <tomcatPath>/path/to/tomcat/instance</tomcatPath>
      </properties>
    </profile>
    -->
  </profiles>
  

  <!-- activeProfiles
   | List of profiles that are active for all builds.
   |
  <activeProfiles>
    <activeProfile>alwaysActiveProfile</activeProfile>
    <activeProfile>anotherAlwaysActiveProfile</activeProfile>
  </activeProfiles>
  -->
</settings>
node.js 云数据库Redis® zookeeper mongodb 数据库

0 人点赞