一、Pgpool-II 简介
官网：https://www.pgpool.net/mediawiki/index.php/Main_Page
Pgpool-II是一个在PostgreSQL服务器和PostgreSQL数据库客户端之间工作的中间件。它是根据BSD许可证授权的。它提供以下功能。
连接池
Pgpool-II保存与PostgreSQL服务器的连接，并在具有相同属性（即用户名，数据库，协议版本）的新连接进入时重用它们。它减少了连接开销，并提高了系统的整体吞吐量。
复制
Pgpool-II可以管理多个PostgreSQL服务器。使用复制功能可以在2个或更多物理磁盘上创建实时备份，以便在磁盘发生故障时服务可以继续运行而不会停止服务器。
负载均衡
如果复制了数据库，则在任何服务器上执行SELECT查询都将返回相同的结果。Pgpool-II利用复制功能，通过在多个服务器之间分配SELECT查询来减少每个PostgreSQL服务器的负载，从而提高系统的整体吞吐量。充其量，性能与PostgreSQL服务器的数量成比例地提高。在许多用户同时执行许多查询的情况下，负载平衡最有效。
限制超出连接
PostgreSQL的最大并发连接数有限制，连接在这么多连接后被拒绝。但是，设置最大连接数会增加资源消耗并影响系统性能。pgpool-II对最大连接数也有限制，但额外连接将排队，而不是立即返回错误。
看家狗
Watchdog可以协调多个Pgpool-II，创建一个强大的集群系统，避免单点故障或脑裂。看门狗可以对其他pgpool-II节点执行生命检查，以检测Pgpoll-II的故障。如果活动Pgpool-II发生故障，则可以将备用Pgpool-II提升为活动状态，并接管虚拟IP。
在内存查询缓存中
在内存中查询缓存允许保存一对SELECT语句及其结果。如果有相同的SELECT，Pgpool-II将从缓存中返回值。由于不涉及SQL解析或访问PostgreSQL，因此在内存缓存中使用速度非常快。另一方面，在某些情况下，它可能比正常路径慢，因为它增加了存储缓存数据的一些开销。
Pgpool-II讲PostgreSQL的后端和前端协议，并在后端和前端之间传递消息。因此，数据库应用程序（前端）认为Pgpool-II是实际的PostgreSQL服务器，服务器（后端）将Pgpool-II视为其客户端之一。因为Pgpool-II对服务器和客户端都是透明的，所以现有的数据库应用程序可以与Pgpool-II一起使用。Pgpool-II讲述PostgreSQL的后端和前端协议，并在它们之间传递连接。因此，数据库应用程序（前端）认为Pgpool-II是实际的PostgreSQL服务器，服务器（后端）将Pgpool-II视为其客户端之一。因为Pgpool-II对服务器和客户端都是透明的，所以现有的数据库应用程序可以与Pgpool-II一起使用，几乎不需要更改其源码。
二、高可用架构图
PG搭建1主2从流复制的过程可以参考“【DB宝60】PG12高可用之1主2从流复制环境搭建及切换测试”，本文基于该篇的基础上，使用Pgpool-II来实现读写分离和负载均衡功能。
整体架构如下所示：
三、使用Docker快速部署Pgpool-II中间件
代码语言：javascript复制-- 下载镜像
docker pull registry.cn-hangzhou.aliyuncs.com/lhrbest/lhrpgpool:4.2.2
-- 创建专用网络
docker network create --subnet=172.72.6.0/24 pg-network
-- 创建Pgpool-II的容器
docker rm -f lhrpgpool
docker run -d --name lhrpgpool -h lhrpgpool
--net=pg-network --ip 172.72.6.6
-p 9999:9999 -p 9898:9898
-v /sys/fs/cgroup:/sys/fs/cgroup
--privileged=true lhrbest/lhrpgpool:4.2.2
/usr/sbin/init
docker network connect bridge lhrpgpool
docker restart lhrpgpool
docker exec -it lhrpgpool bash
四、配置Pgpool-II
以下所有操作均在pgsql用户执行。
4.1、拷贝参数文件
代码语言：javascript复制[root@lhrpgpool etc]# su - pgsql
Last login: Mon Apr 26 14:28:35 CST 2021 on pts/0
[pgsql@lhrpgpool /]# cp /postgresql/pgpool/etc/pgpool.conf.sample /postgresql/pgpool/etc/pgpool.conf
[pgsql@lhrpgpool /]# cp /postgresql/pgpool/etc/pool_hba.conf.sample /postgresql/pgpool/etc/pool_hba.conf
[pgsql@lhrpgpool /]# cp /postgresql/pgpool/etc/pcp.conf.sample /postgresql/pgpool/etc/pcp.conf
4.2、配置pgpool.conf
代码语言：javascript复制? vi进入列操作：Ctrl v 进入块选择模式，然后移动光标选中你要注释的行，再按大写的I进入行首插入模式，输入注释符号如 // 或 #，输入完毕之后，按两下ESC，Vim会自动将你选中的所有行首都加上注释，保存退出完成注释。
vi /postgresql/pgpool/etc/pgpool.conf
# - pgpool Connection Settings -
listen_addresses = '*'
# - Backend Connection Settings -
backend_hostname0 = '172.72.6.2'
backend_port0 = 5432
backend_weight0 = 1
backend_data_directory0 = '/var/lib/postgresql/data'
backend_flag0 = 'ALLOW_TO_FAILOVER'
backend_application_name0 = 'lhrpg64302'
backend_hostname1 = '172.72.6.3'
backend_port1 = 5432
backend_weight1 = 1
backend_data_directory1 = '/var/lib/postgresql/data'
backend_flag1 = 'ALLOW_TO_FAILOVER'
backend_application_name1 = 'lhrpg64303'
backend_hostname2 = '172.72.6.4'
backend_port2 = 5432
backend_weight2 = 1
backend_data_directory2 = '/var/lib/postgresql/data'
backend_flag2 = 'ALLOW_TO_FAILOVER'
backend_application_name2 = 'lhrpg64304'
# - Authentication -
enable_pool_hba = on
# - Where to log -
log_destination = 'syslog'
log_connections = on
#------------------------------------------------------------------------------
# FILE LOCATIONS
#------------------------------------------------------------------------------
pid_file_name = '/postgresql/pgpool/pgpool.pid'
logdir = '/tmp'
#------------------------------------------------------------------------------
# LOAD BALANCING MODE
#------------------------------------------------------------------------------
load_balance_mode = on
4.3、开启系统日志（root操作）
pgpool的日志默认写到stderr，可以如上文中设置为syslog中。但由于默认情况下写入LOCAL0级别的日志会被丢弃，故要在/etc/rsyslog.conf中修改该syslog指定的输出路径：
代码语言：javascript复制echo "local0.* /postgresql/pgpool/pgpool.log" >> /etc/rsyslog.conf
systemctl restart rsyslog.service
4.4、配置pool_hba.conf
代码语言：javascript复制su - pgsql
echo "host all all 0.0.0.0/0 md5" >> /postgresql/pgpool/etc/pool_hba.conf
4.5、生成pool_passwd文件
代码语言：javascript复制pg_md5 --md5auth --username=nobody "lhr"
pg_md5 --md5auth --username=lhr "lhr"
pg_md5 --md5auth --username=pgpool "lhr"
pg_md5 --md5auth --username=postgres "lhr"
会生成pool_passwd文件：
代码语言：javascript复制[pgsql@lhrpgpool ~]$ pg_md5 --md5auth --username=nobody "lhr"
[pgsql@lhrpgpool ~]$ pg_md5 --md5auth --username=lhr "lhr"
[pgsql@lhrpgpool ~]$ pg_md5 --md5auth --username=pgpool "lhr"
[pgsql@lhrpgpool ~]$ pg_md5 --md5auth --username=postgres "lhr"
[pgsql@lhrpgpool ~]$ cd /postgresql/etc
[pgsql@lhrpgpool etc]$ cat pool_passwd
nobody:md5188b0dfd531e1734c1e5bb4d57053d64
lhr:md53e5c401ee2b9f28db1bb075b1b99e0ad
pgpool:md547b6c1f1700de696bcb6b98dc6a21ab6
postgres:md5da3edeb741de62d06ab73785ed222494
4.6、配置pcp.conf文件
代码语言：javascript复制[pgsql@lhrcentos76 ~]$ pg_md5 -u=pgpool "lhr"
3996643de967b80174e48fb45d7227b1
echo "pgpool:3996643de967b80174e48fb45d7227b1" >> /postgresql/pgpool/etc/pcp.conf
4.7、在主库创建用户
代码语言：javascript复制psql -U postgres -h 192.168.66.35 -p64302
create role nobody login encrypted password 'lhr';
create role lhr login encrypted password 'lhr';
create role pgpool login encrypted password 'lhr';
grant postgres to nobody,lhr,pgpool;
在 PostgreSQL 里没有区分用户和角色的概念，CREATE USER 为 CREATE ROLE 的别名，这两个命令几乎是完全相同的，唯一的区别是”CREATE USER”命令创建的用户的 LOGIN 属性默认为 on , 而 CREATE ROLE 命令创建的用户的 NOLOGIN 属性默认为 on。
五、启动Pgpool-II
代码语言：javascript复制cat >> /lib/systemd/system/pgpool.service <<"EOF"
[Unit]
Description=Pgpool-II
After=syslog.target network.target
[Service]
User=pgsql
Group=pgsql
EnvironmentFile=-/etc/sysconfig/pgpool
ExecStart=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -n
ExecStop=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -m fast stop
ExecReload=/postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf reload
LimitNOFILE=65536
KillMode=process
KillSignal=SIGINT
Restart=on-abnormal
RestartSec=30s
TimeoutSec=0
[Install]
WantedBy=multi-user.target
EOF
chmod x /lib/systemd/system/pgpool.service
systemctl enable pgpool
systemctl start pgpool
systemctl status pgpool
结果：
代码语言：javascript复制[root@lhrpgpool etc]# systemctl status pgpool
● pgpool.service - Pgpool-II
Loaded: loaded (/usr/lib/systemd/system/pgpool.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2021-04-26 14:35:27 CST; 1s ago
Main PID: 1954 (pgpool)
CGroup: /docker/c3f0c9600069f719f49e81e3602f642925feecb5e134c8aedb96753728730013/system.slice/pgpool.service
├─1954 /postgresql/pgpool/bin/pgpool -f /postgresql/pgpool/etc/pgpool.conf -n
├─1956 pgpool: wait for connection request
├─1957 pgpool: wait for connection request
├─1958 pgpool: wait for connection request
├─1959 pgpool: wait for connection request
├─1960 pgpool: wait for connection request
├─1961 pgpool: wait for connection request
├─1962 pgpool: wait for connection request
├─1963 pgpool: wait for connection request
├─1964 pgpool: wait for connection request
├─1965 pgpool: wait for connection request
├─1966 pgpool: wait for connection request
├─1967 pgpool: wait for connection request
├─1968 pgpool: wait for connection request
├─1969 pgpool: wait for connection request
├─1970 pgpool: wait for connection request
├─1971 pgpool: wait for connection request
├─1972 pgpool: wait for connection request
├─1973 pgpool: wait for connection request
├─1974 pgpool: wait for connection request
├─1975 pgpool: wait for connection request
├─1976 pgpool: wait for connection request
├─1977 pgpool: wait for connection request
├─1978 pgpool: wait for connection request
├─1979 pgpool: wait for connection request
├─1980 pgpool: wait for connection request
├─1981 pgpool: wait for connection request
├─1982 pgpool: wait for connection request
├─1983 pgpool: wait for connection request
├─1984 pgpool: wait for connection request
├─1985 pgpool: wait for connection request
├─1986 pgpool: wait for connection request
├─1987 pgpool: wait for connection request
├─1988 pgpool: PCP: wait for connection request
├─1989 pgpool: worker process
├─1990 pgpool: health check process(0)
├─1991 pgpool: health check process(1)
└─1992 pgpool: health check process(2)
Apr 26 14:35:28 lhrpgpool pgpool[1954]: [14-1] 2021-04-26 14:35:28: pid 1954: LOG: find_primary_node: standby node is 2
Apr 26 14:35:28 lhrpgpool pgpool[1988]: [15-1] 2021-04-26 14:35:28: pid 1988: LOG: PCP process: 1988 started
Apr 26 14:35:28 lhrpgpool pgpool[1990]: [15-1] 2021-04-26 14:35:28: pid 1990: LOG: process started
Apr 26 14:35:28 lhrpgpool pgpool[1991]: [15-1] 2021-04-26 14:35:28: pid 1991: LOG: process started
Apr 26 14:35:28 lhrpgpool pgpool[1989]: [15-1] 2021-04-26 14:35:28: pid 1989: LOG: process started
Apr 26 14:35:28 lhrpgpool pgpool[1992]: [15-1] 2021-04-26 14:35:28: pid 1992: LOG: process started
Apr 26 14:35:28 lhrpgpool pgpool[1954]: [15-1] 2021-04-26 14:35:28: pid 1954: LOG: pgpool-II successfully started. version 4.2.2 (chichiriboshi)
Apr 26 14:35:28 lhrpgpool pgpool[1954]: [16-1] 2021-04-26 14:35:28: pid 1954: LOG: node status[0]: 1
Apr 26 14:35:28 lhrpgpool pgpool[1954]: [17-1] 2021-04-26 14:35:28: pid 1954: LOG: node status[1]: 2
Apr 26 14:35:28 lhrpgpool pgpool[1954]: [18-1] 2021-04-26 14:35:28: pid 1954: LOG: node status[2]: 2
六、查询节点状态
代码语言：javascript复制[pgsql@lhrpgpool ~]$ psql -U nobody -h localhost -p 9999 -d postgres
psql (13.2, server 12.2 (Debian 12.2-2.pgdg100 1))
Type "help" for help.
postgres=> show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 14:35:27
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 0 | false | 0 | | | 2021-04-26 14:35:27
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 0 | true | 0 | | | 2021-04-26 14:35:27
(3 rows)
查看pgpool后端状态：
代码语言：javascript复制pcp_node_info -U pgpool -h localhost -p 9898 -n 0 -v
pcp_node_info -U pgpool -h localhost -p 9898 -n 1 -v
pcp_node_info -U pgpool -h localhost -p 9898 -n 2 -v
结果：
代码语言：javascript复制[pgsql@lhrpgpool ~]$ pcp_node_info -U pgpool -h localhost -p 9898 -n 0 -v
Password:
Hostname : 172.72.6.2
Port : 5432
Status : 2
Weight : 0.333333
Status Name : up
Role : primary
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-04-26 14:35:27
[pgsql@lhrpgpool ~]$ pcp_node_info -U pgpool -h localhost -p 9898 -n 1 -v
Password:
Hostname : 172.72.6.3
Port : 5432
Status : 2
Weight : 0.333333
Status Name : up
Role : standby
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-04-26 14:35:27
[pgsql@lhrpgpool ~]$ pcp_node_info -U pgpool -h localhost -p 9898 -n 2 -v
Password:
Hostname : 172.72.6.4
Port : 5432
Status : 2
Weight : 0.333333
Status Name : up
Role : standby
Replication Delay : 0
Replication State :
Replication Sync State :
Last Status Change : 2021-04-26 14:35:27
七、测试读写分离 负载均衡
测试之前，可以考虑修改文件pgpool.conf中的如下参数：
代码语言：javascript复制log_statement=all
log_per_node_statement =on
client_min_messages =log
log_min_messages = info
生效：
代码语言：javascript复制pgpool reload
测试完成后，修改回原值：
代码语言：javascript复制log_statement=off
log_per_node_statement = off
# client_min_messages =notice
# log_min_messages = warning
测试过程：
代码语言：javascript复制-- 开3个窗口
psql -U postgres -h 192.168.66.35 -p 9999 -d sbtest
create table test(id int);
insert into test values(1);
select * from test;
窗口1：
代码语言：javascript复制C:Userslhrxxt>psql -U postgres -h 192.168.66.35 -p 9999 -d sbtest
Password for user postgres:
psql (13.2, server 12.2 (Debian 12.2-2.pgdg100 1))
Type "help" for help.
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
LOG: DB node id: 0 backend pid: 10106 statement: SELECT version()
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 0 | true | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 0 | false | 0 | | | 2021-04-26 09:54:44
(3 rows)
sbtest=# create table test(id int);
LOG: statement: create table test(id int);
LOG: DB node id: 0 backend pid: 10106 statement: create table test(id int);
CREATE TABLE
sbtest=# insert into test values (1);
LOG: statement: insert into test values (1);
LOG: DB node id: 0 backend pid: 10106 statement: insert into test values (1);
INSERT 0 1
sbtest=# select * from test;
LOG: statement: select * from test;
LOG: DB node id: 0 backend pid: 10106 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 10106 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 10106 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relpersistence = 'u'
LOG: DB node id: 1 backend pid: 6069 statement: select * from test;
id
----
1
(1 row)
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 1 | true | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 0 | false | 0 | | | 2021-04-26 09:54:44
(3 rows)
窗口2：
代码语言：javascript复制C:Userslhrxxt>psql -U postgres -h 192.168.66.35 -p 9999 -d sbtest
Password for user postgres:
psql (13.2, server 12.2 (Debian 12.2-2.pgdg100 1))
Type "help" for help.
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
LOG: DB node id: 0 backend pid: 10116 statement: SELECT version()
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 0 | true | 0 | | | 2021-04-26 09:54:44
(3 rows)
sbtest=# select * from test;
LOG: statement: select * from test;
LOG: DB node id: 0 backend pid: 10116 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 10116 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 10116 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relpersistence = 'u'
LOG: DB node id: 2 backend pid: 6085 statement: select * from test;
id
----
1
(1 row)
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 1 | true | 0 | | | 2021-04-26 09:54:44
(3 rows)
sbtest=# insert into test values(2);
LOG: statement: insert into test values(2);
LOG: DB node id: 0 backend pid: 10116 statement: insert into test values(2);
INSERT 0 1
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 1 | true | 0 | | | 2021-04-26 09:54:44
(3 rows)
窗口3：
代码语言：javascript复制C:Userslhrxxt>psql -U postgres -h 192.168.66.35 -p 9999 -d sbtest
Password for user postgres:
psql (13.2, server 12.2 (Debian 12.2-2.pgdg100 1))
Type "help" for help.
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
LOG: DB node id: 0 backend pid: 10127 statement: SELECT version()
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 1 | true | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
(3 rows)
sbtest=# select * from test;
LOG: statement: select * from test;
LOG: DB node id: 0 backend pid: 10127 statement: SELECT count(*) FROM pg_class AS c, pg_namespace AS n WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relnamespace = n.oid AND n.nspname = 'pg_catalog'
LOG: DB node id: 0 backend pid: 10127 statement: SELECT count(*) FROM pg_catalog.pg_class AS c, pg_namespace AS n WHERE c.relname = 'test' AND c.relnamespace = n.oid AND n.nspname ~ '^pg_temp_'
LOG: DB node id: 0 backend pid: 10127 statement: SELECT count(*) FROM pg_catalog.pg_class AS c WHERE c.oid = pg_catalog.to_regclass('"test"') AND c.relpersistence = 'u'
LOG: DB node id: 1 backend pid: 6084 statement: select * from test;
id
----
1
2
(2 rows)
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 2 | true | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
(3 rows)
sbtest=# insert into test values(3);
LOG: statement: insert into test values(3);
LOG: DB node id: 0 backend pid: 10127 statement: insert into test values(3);
INSERT 0 1
sbtest=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 0 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 2 | true | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 1 | false | 0 | | | 2021-04-26 09:54:44
(3 rows)
-- 多做几次其他测试
postgres=# show pool_nodes;
LOG: statement: show pool_nodes;
node_id | hostname | port | status | lb_weight | role | select_cnt | load_balance_node | replication_delay | replication_state | replication_sync_state | last_status_change
--------- ------------ ------ -------- ----------- --------- ------------ ------------------- ------------------- ------------------- ------------------------ ---------------------
0 | 172.72.6.2 | 5432 | up | 0.333333 | primary | 6 | false | 0 | | | 2021-04-26 09:54:44
1 | 172.72.6.3 | 5432 | up | 0.333333 | standby | 7 | false | 0 | | | 2021-04-26 09:54:44
2 | 172.72.6.4 | 5432 | up | 0.333333 | standby | 8 | true | 0 | | | 2021-04-26 09:54:44
(3 rows)
? 可以看到，读操作被均衡的分配到0、1和2这3个节点上，而写操作只分配到0节点上。
另外，在告警日志里也会记录相关的信息（/postgresql/pgpool/pgpool.log）。
代码语言：javascript复制Apr 26 10:01:06 lhrpgpool pgpool[32486]: [20-1] 2021-04-26 10:01:06: pid 32486: LOG: statement: show pool_nodes;
Apr 26 10:01:23 lhrpgpool pgpool[32486]: [21-1] 2021-04-26 10:01:23: pid 32486: LOG: statement: insert into test values(3);
Apr 26 10:01:23 lhrpgpool pgpool[32486]: [22-1] 2021-04-26 10:01:23: pid 32486: LOG: DB node id: 0 backend pid: 10127 statement: insert into test values(3);
Apr 26 10:01:26 lhrpgpool pgpool[32486]: [23-1] 2021-04-26 10:01:26: pid 32486: LOG: statement: show pool_nodes;
Apr 26 10:02:02 lhrpgpool pgpool[32486]: [24-1] 2021-04-26 10:02:02: pid 32486: LOG: statement: select * from test;
Apr 26 10:02:02 lhrpgpool pgpool[32486]: [25-1] 2021-04-26 10:02:02: pid 32486: LOG: DB node id: 1 backend pid: 6084 statement: select * from test;
Apr 26 10:02:04 lhrpgpool pgpool[32485]: [25-1] 2021-04-26 10:02:04: pid 32485: LOG: statement: select * from test;
Apr 26 10:02:04 lhrpgpool pgpool[32485]: [26-1] 2021-04-26 10:02:04: pid 32485: LOG: DB node id: 1 backend pid: 6069 statement: select * from test;
Apr 26 10:02:06 lhrpgpool pgpool[32485]: [27-1] 2021-04-26 10:02:06: pid 32485: LOG: statement: select * from test;
Apr 26 10:02:06 lhrpgpool pgpool[32485]: [28-1] 2021-04-26 10:02:06: pid 32485: LOG: DB node id: 1 backend pid: 6069 statement: select * from test;
Apr 26 10:02:09 lhrpgpool pgpool[32476]: [24-1] 2021-04-26 10:02:09: pid 32476: LOG: statement: select * from test;
Apr 26 10:02:09 lhrpgpool pgpool[32476]: [25-1] 2021-04-26 10:02:09: pid 32476: LOG: DB node id: 2 backend pid: 6085 statement: select * from test;
Apr 26 10:02:11 lhrpgpool pgpool[32486]: [26-1] 2021-04-26 10:02:11: pid 32486: LOG: statement: select * from test;
Apr 26 10:02:11 lhrpgpool pgpool[32486]: [27-1] 2021-04-26 10:02:11: pid 32486: LOG: DB node id: 1 backend pid: 6084 statement: select * from test;
Apr 26 10:02:13 lhrpgpool pgpool[32486]: [28-1] 2021-04-26 10:02:13: pid 32486: LOG: statement: select * from test;
Apr 26 10:02:13 lhrpgpool pgpool[32486]: [29-1] 2021-04-26 10:02:13: pid 32486: LOG: DB node id: 1 backend pid: 6084 statement: select * from test;
本文结束。
