代码语言：javascript复制
Linux Asynchronous I/O Explained (Last updated: 13 Apr 2012)
*******************************************************************************
by Vasily Tarasov <tarasov AT vasily dot name>
Asynchronoes I/O (AIO) is a method for performing I/O operations so that the
process that issued an I/O request is not blocked till the data is available.
Instead, after an I/O request is submitted, the process continues to execute
its code and can later check the status of the submitted request.
Linux kernel provides only *5* system calls for performing asynchronoes I/O.
Other AIO functions commonly descibed in the literature are implemented in the
user space libraries and use the system calls internally. Some libraries can
also emulate AIO functionality entirely in the user space without any kernel
support.
There are two main libraries in Linux that facilitate AIO, we will refer to
them as *libaio* and *librt* (the latter one is a part of libc).
In this text, I first discuss system calls, then libaio, and finaly librt.
AIO System Calls
*******************************************************************************
based on Linux 3.2.1 kernel
AIO system call entry points are located in "fs/aio.c" file in the kernel's
source code. Types and constants exported to the user space reside in
"/usr/include/linux/aio_abi.h" header file.
There are only 5 AIO system calls:
* int io_setup(unsigned nr_events, aio_context_t *ctxp);
* int io_destroy(aio_context_t ctx);
* int io_submit(aio_context_t ctx, long nr, struct iocb *cbp[]);
* int io_cancel(aio_context_t ctx, struct iocb *, struct io_event *result);
* int io_getevents(aio_context_t ctx, long min_nr, long nr,
struct io_event *events, struct timespec *timeout);
I will demonstrate the usage of these system calls using a sequence of programs
in the increasing order of their complexity.
Program 1:
>> snip start: 1.c >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
00 #define _GNU_SOURCE /* syscall() is not POSIX */
01
02 #include <stdio.h> /* for perror() */
03 #include <unistd.h> /* for syscall() */
04 #include <sys/syscall.h> /* for __NR_* definitions */
05 #include <linux/aio_abi.h> /* for AIO types and constants */
06
07 inline int io_setup(unsigned nr, aio_context_t *ctxp)
08 {
09 return syscall(__NR_io_setup, nr, ctxp);
10 }
11
12 inline int io_destroy(aio_context_t ctx)
13 {
14 return syscall(__NR_io_destroy, ctx);
15 }
16
17 int main()
18 {
19 aio_context_t ctx;
20 int ret;
21
22 ctx = 0;
23
24 ret = io_setup(128, &ctx);
25 if (ret < 0) {
26 perror("io_setup error");
27 return -1;
28 }
29
30 ret = io_destroy(ctx);
31 if (ret < 0) {
32 perror("io_destroy error");
33 return -1;
34 }
35
36 return 0;
37 }
<< snip end: 1.c <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
For now, ignore first 17 lines of the code and look at main() function. In line
24 we call io_setup() system call to create so called "AIO context" in the
kernel. AIO context is a set of data structures that the kernel supports to
perform AIO. Every process can have multiple AIO contextes and as such one
needs an identificator for every AIO context in a process (XXX: come up with a
handy example how it can be used). Ctx variable of type aio_context_t defined in
line 19 stores such an identificator in our example. A pointer to ctx variable
is passed to io_setup() as a second argument and kernel fills this variable
with a context identifier. Interestingly, aio_context_t is actually just an
unsigned long defined in the kernel ("linux/aio_abi.h") like that:
typedef unsigned long aio_context_t;
In line 22 we set ctx to 0 which is required by kernel or io_setup() fails with
-EINVAL error.
The first argument of io_setup() function - 128 in our case - is the maximum
number of requests that can simultaneously reside in the context. This will be
explained in more details in the next examples.
In line 30 we destroy just created AIO context by calling io_destroy() system
call with ctx as an argument.
The lines above 17 are just helpers that allow to call system calls directly. We
use glibc's syscall() function that invokes any system call by its number. It
is only required if one wants to call system calls directly without using AIO
libraries' wrapper functions (provided by libaio and librt). Notice, that
syscall() functions's return value follows the usual conventions for indicating
an error: -1, with errno set to a positive value that indicates the error.
So, we check if the values returned by io_setup() and io_destroy() are less than
zero to detect the error, and then use perror() function that will print the
errno.
In the last example we did a minimal thing: created an AIO context and then
destroyed it immediatelly. In the next example we submit one request to the
context and then query its status later.
Program 2:
>> snip start: 2.c >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
00 #define _GNU_SOURCE /* syscall() is not POSIX */
01
02 #include <stdio.h> /* for perror() */
03 #include <unistd.h> /* for syscall() */
04 #include <sys/syscall.h> /* for __NR_* definitions */
05 #include <linux/aio_abi.h> /* for AIO types and constants */
06 #include <fcntl.h> /* O_RDWR */
07 #include <string.h> /* memset() */
08 #include <inttypes.h> /* uint64_t */
09
10 inline int io_setup(unsigned nr, aio_context_t *ctxp)
11 {
12 return syscall(__NR_io_setup, nr, ctxp);
13 }
14
15 inline int io_destroy(aio_context_t ctx)
16 {
17 return syscall(__NR_io_destroy, ctx);
18 }
19
20 inline int io_submit(aio_context_t ctx, long nr, struct iocb **iocbpp)
21 {
22 return syscall(__NR_io_submit, ctx, nr, iocbpp);
23 }
24
25 inline int io_getevents(aio_context_t ctx, long min_nr, long max_nr,
26 struct io_event *events, struct timespec *timeout)
27 {
28 return syscall(__NR_io_getevents, ctx, min_nr, max_nr, events, timeout);
29 }
30
31 int main()
32 {
33 aio_context_t ctx;
34 struct iocb cb;
35 struct iocb *cbs[1];
36 char data[4096];
37 struct io_event events[1];
38 int ret;
39 int fd;
40
41 fd = open("/tmp/testfile", O_RDWR | O_CREAT);
42 if (fd < 0) {
43 perror("open error");
44 return -1;
45 }
46
47 ctx = 0;
48
49 ret = io_setup(128, &ctx);
50 if (ret < 0) {
51 perror("io_setup error");
52 return -1;
53 }
54
55 /* setup I/O control block */
56 memset(&cb, 0, sizeof(cb));
57 cb.aio_fildes = fd;
58 cb.aio_lio_opcode = IOCB_CMD_PWRITE;
59
60 /* command-specific options */
61 cb.aio_buf = (uint64_t)data;
62 cb.aio_offset = 0;
63 cb.aio_nbytes = 4096;
64
65 cbs[0] = &cb;
66
67 ret = io_submit(ctx, 1, cbs);
68 if (ret != 1) {
69 if (ret < 0)
70 perror("io_submit error");
71 else
72 fprintf(stderr, "could not sumbit IOs");
73 return -1;
74 }
75
76 /* get the reply */
77 ret = io_getevents(ctx, 1, 1, events, NULL);
78 printf("%dn", ret);
79
80 ret = io_destroy(ctx);
81 if (ret < 0) {
82 perror("io_destroy error");
83 return -1;
84 }
85
86 return 0;
87 }
<< snip end: 2.c <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Every I/O request that is submitted to an AIO context is represented by an I/O
control block structure - struct iocb - declared in line 34. We initialize this
structure in lines 55-63. First, the whole structure is zeroed, then file
descriptor (aio_fildes) and command (aio_lio_opcode) fields are set.
File descriptor corresponds to a previously opened file, in our example we
open "/tmp/testfile" file in line 41.
AIO commands currently supported by Linux kernel are:
IOCB_CMD_PREAD
positioned read; corresponds to pread() system call.
IOCB_CMD_PWRITE
positioned write; corresponds to pwrite() system call.
IOCB_CMD_FSYNC
sync file's data and metadata with disk; corresponds to fsync() system call.
IOCB_CMD_FDSYNC
sync file's data and metadata with disk, but only metadata needed to access
modified file data is written; corresponds to fdatasync() system call.
IOCB_CMD_PREADV
vectored positioned read, sometimes called "scattered input";
corresponds to pread() system call.
IOCB_CMD_PWRITEV
vectored positioned write, sometimes called "gathered output";
corresponds to pwrite() system call.
IOCB_CMD_NOOP
defined in the header file, but is not used anywhere else in the kernel.
The semantics of other fields in the iocb structure depends on the command
specified. For now, we will limit our discussion to IOCB_CMD_PREAD and
IOCB_CMD_PWRITE commands. After understanding AIO interface for these two
commands, we will look into the remaining ones.
In lines 60-63 of our running example we set command-specific fields of iocb
structure: aio_buf and aio_nbytes corresond to a region in memory to which
data should be read or written to; aio_offset is an absolute offset in a file.
Now, when one I/O control block is ready, we put a pointer to it in an array
(line 65) and then pass this array to the io_submit() system call (line 67).
io_submit() takes AIO context ID, size of the array and the array itself as the
arguments. Notice, that array should contain *pointers* to the iocb structures,
not the structures themself.
io_submit()'s return code can be one of the following values:
A) ret = (number of iocbs sumbmitted)
Ideal case, all iocbs were accepted for processing.
B) 0 < ret < (number of iocbs sumbmitted)
io_submit() system call processes iocbs one by one starting from
the first entry in the passed array. If submission of some iocb fails,
it stops at this point and returns the index of iocb that failed.
There is no way to know what is the exact reason of a failure.
However, if the very first iocb submission fails, see point C.
C) ret < 0
There are two reasons why this could happen:
1) Some error happened even before io_submit() started to iterate
over iocbs in the array (e.g., AIO context was invalid).
2) The submission of the very first iocb (cbx[0]) failed).
So, in our example, we handle io_submit()'s return code in an unusual way. If
return code is not equal to the number of iocbs, then that is a clear error but
we don't know its reason (errno is not set). Consequently, we use
fprintf(stderr, ...) function to print error notification on the screen.
Otherwise, if return code is less than zero, then we know the error (errno is
set) and use perror() function instead. Notice, that in case of a single iocb
in the array (as in our example) such a complex error handling makes less sense:
if the first (and only) iocb fails, we are guaranteed to get an error
information (see point C above). We handle error in a more complex way in this
example only to reuse the same code later, when we submit multiple iocbs in a
single io_submit() call.
After iocb is submitted we can perform any other actions without waiting for I/O
to complete. For every completed I/O request (successfully or unsuccessfully)
kernel creates an io_event structure. To obtain the list of io_events (and
consequently all completed iocbs) io_getevent() system call should be used (line
77). When calling io_getevents(), one needs to specify:
a) which AIO context to get events from (ctx variable)
b) a buffer where the kernel should load events to (events varaiable)
c) minimal number of events one wants to get (first 1 in our program).
If less then this number of iocbs are currently completed,
io_getevents() will block till enough events appear. See point e)
for more details on how to control blocking time.
d) maximum number of events one wants to get. This usually is
the size of the events buffer (second 1 in our program)
e) If not enough events are available, we don't want to wait forever.
One can specify a relative deadline as the last argument.
NULL in this case means to wait infinitely.
If one wants io_getevents() not to block at all then
timespec timeout structure need to be initialzed to zero
seconds and zero nanoseconds.
The return code of io_getevents can be:
A) ret = (max number of events)
All events that fit in the user provided buffer were obtained
from the kernel. There might be more pending events in the kernel.
B) (min number of events) <= ret <= (max number of events)
All currently available events were read from the kernel and no
blocking happened.
C) 0 < ret < (min number of events)
All currently available events were read from the kernel and
we blocked to wait for the time user has specified.
E) ret = 0
no events are available XXX:? does blocking happen in this case?..
F) ret < 0
an error happened
TO BE CONTINUED...
/proc/sys/fs/aio-max-nr
/proc/sys/fs/aio-nr
Note that timeout is relative and will be updated if not NULL and the operation
blocks
Check how vectors a provide to vectored PREADV and PWRITEV commands.
Other fields to fill/explain:
/* these are internal to the kernel/libc. */
__u64 aio_data; /* data to be returned in event's data */
__u32 PADDED(aio_key, aio_reserved1);
/* the kernel sets aio_key to the req # */
/* common fields */
__u16 aio_lio_opcode; /* see IOCB_CMD_ above */
__s16 aio_reqprio;
__u32 aio_fildes;
__u64 aio_buf;
__u64 aio_nbytes;
__s64 aio_offset;
/* extra parameters */
__u64 aio_reserved2; /* TODO: use this for a (struct sigevent *) */
/* flags for the "struct iocb" */
__u32 aio_flags;
/*
* if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
* eventfd to signal AIO readiness to
*/
__u32 aio_resfd;
*** SYNC RELATED COMMANDS ***
IOCB_CMD_FSYNC
sync file's data and metadata with disk; corresponds to fsync() system call.
IOCB_CMD_FDSYNC
sync file's data and metadata with disk, but only metadata needed to access
modified file data is written; corresponds to fdatasync() system call.
*** VECTORED INPUT and OUTPUT ***
IOCB_CMD_PREADV
vectored positioned read, sometimes called "scattered input";
corresponds to pread() system call.
IOCB_CMD_PWRITEV
vectored positioned write, sometimes called "gathered output";
corresponds to pwrite() system call.
*** OTHER COMMANDS ***
IOCB_CMD_NOOP
defined in the header file, but is not used anywhere else in the kernel.
XXX: May be discass Poll and other semi-existing commands here?...
*********************************************************
********************* LIBAIO LIBRARY ********************
*********************************************************
libaio:
/lib64/libaio.so.1 (shared library)
libaio-devel:
/usr/include/libaio.h (header library)
/usr/lib64/libaio.a (static library)
Functions:
a) Actual system call wrappers:
int io_setup(int maxevents, io_context_t *ctxp);
int io_destroy(io_context_t ctx);
int io_submit(io_context_t ctx, long nr, struct iocb *ios[]);
int io_cancel(io_context_t ctx, struct iocb *iocb, struct io_event *evt);
io_getevents(io_context_t ctx_id, long min_nr, long nr, struct io_event *events, struct timespec *timeout);
io_context_t is a pointer to an non-existing stucture:
typedef struct io_context *io_context_t;
Not a single line of code in any user tool or in the libaio library looks at the
members of 'struct io_context'. So, gcc happily compiles the code even though
struct io_context is not defined. This structure is probably defined just for
type checking. The rule of thumb when using libaio is just to declare all
variables as io_context_t and forget that it actually is a pointer!
b) Convenient macroses:
static inline void io_prep_pread(struct iocb *iocb, int fd, void *buf, size_t count, long long offset)
static inline void io_prep_pwrite(struct iocb *iocb, int fd, void *buf, size_t count, long long offset)
static inline void io_prep_preadv(struct iocb *iocb, int fd, const struct iovec *iov, int iovcnt, long long offset)
static inline void io_prep_pwritev(struct iocb *iocb, int fd, const struct iovec *iov, int iovcnt, long long offset)
static inline void io_prep_poll(struct iocb *iocb, int fd, int events)
static inline void io_prep_fsync(struct iocb *iocb, int fd)
static inline void io_prep_fdsync(struct iocb *iocb, int fd)
static inline int io_poll(io_context_t ctx, struct iocb *iocb, io_callback_t cb, int fd, int events)
static inline int io_fsync(io_context_t ctx, struct iocb *iocb, io_callback_t cb, int fd)
static inline int io_fdsync(io_context_t ctx, struct iocb *iocb, io_callback_t cb, int fd)
static inline void io_set_eventfd(struct iocb *iocb, int eventfd);
*********************************************************
******** MATCHING LIBAIO AND KERNEL INTERFACE ***********
*********************************************************
libaio.h redefines some of the kernel definitions (god know why),
but they match at the binary level. E.g., this is kernel
exported definition of iocb:
struct iocb {
/* these are internal to the kernel/libc. */
__u64 aio_data; /* data to be returned in event's data */
__u32 PADDED(aio_key, aio_reserved1);
/* the kernel sets aio_key to the req # */
/* common fields */
__u16 aio_lio_opcode; /* see IOCB_CMD_ above */
__s16 aio_reqprio;
__u32 aio_fildes;
__u64 aio_buf;
__u64 aio_nbytes;
__s64 aio_offset;
/* extra parameters */
__u64 aio_reserved2; /* TODO: use this for a (struct sigevent *) */
/* flags for the "struct iocb" */
__u32 aio_flags;
/*
* if the IOCB_FLAG_RESFD flag of "aio_flags" is set, this is an
* eventfd to signal AIO readiness to
*/
__u32 aio_resfd;
}; /* 64 bytes */
And this is definition of iocb by libaio.h:
struct io_iocb_common {
PADDEDptr(void *buf, __pad1);
PADDEDul(nbytes, __pad2);
long long offset;
long long __pad3;
unsigned flags;
unsigned resfd;
}; /* result code is the amount read or -'ve errno */
struct iocb {
PADDEDptr(void *data, __pad1); /* Return in the io completion event */
PADDED(unsigned key, __pad2); /* For use in identifying io requests */
short aio_lio_opcode;
short aio_reqprio;
int aio_fildes;
union {
struct io_iocb_common c;
struct io_iocb_vector v;
struct io_iocb_poll poll;
struct io_iocb_sockaddr saddr;
} u;
};
****** AIO LIBRARY *****
glibc:
/lib64/librt.so.1
glibc-headers:
/usr/include/aio.h
Provide POSIX-defined interface for async I/O.
aio_read()
aio_write()
aio_cancel()
aio_error()
aio_fsync()
aio_suspend()
aio_return()
lio_listio
****** To discover ****
XXX: see if these are implemented in some other kernels:
/* These two are experimental.
* IOCB_CMD_PREADX = 4,
* IOCB_CMD_POLL = 5,
*/
XXX: potential resubmittion of the wrong iocb, knowing its index.
XXX: two AIO contextes per process?
原文链接：https://www.fsl.cs.sunysb.edu/~vass/linux-aio.txt
