我们在https://www.cnblogs.com/dongxiao-yang/p/9403427.html文章里分析了flink提交single job到yarn集群上的代码，flink在1.5版本后对整个框架的deploy方式重构了全新的流程（参考https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=65147077），本文基于flink1.6.1版本源码分析一下新模式在yarn的整个流程。
一 初始化
客户端本地整个初始化流程与https://www.cnblogs.com/dongxiao-yang/p/9403427.html差不多，由于newmode的关系，几个有区别的地方为
1 final ClusterDescriptor<T> clusterDescriptor = customCommandLine.createClusterDescriptor(commandLine); ，返回的具体对象类为YarnClusterDescriptor
2 ClientFrontend.runProgram方法会进入if (isNewMode && clusterId == null && runOptions.getDetachedMode()) {..方法块，调用路径为
代码语言：javascript复制YarnClusterDescriptor.deployJobCluster->AbstractYarnClusterDescriptor.deployInternal->startAppMaster这个时候我们发现AM的启动类变成了YarnJobClusterEntrypoint
二 YarnJobClusterEntrypoint
YarnJobClusterEntrypoint的main函数是整个AM进程的启动入口，在方法的最后会调用其祖父类ClusterEntrypoint的startCluster方法开启整个集群组件的启动过程。
具体调用链路为startCluster->runCluster->startClusterComponents
代码语言：javascript复制protected void startClusterComponents(
Configuration configuration,
RpcService rpcService,
HighAvailabilityServices highAvailabilityServices,
BlobServer blobServer,
HeartbeatServices heartbeatServices,
MetricRegistry metricRegistry) throws Exception {
synchronized (lock) {
dispatcherLeaderRetrievalService = highAvailabilityServices.getDispatcherLeaderRetriever();
resourceManagerRetrievalService = highAvailabilityServices.getResourceManagerLeaderRetriever();
LeaderGatewayRetriever<DispatcherGateway> dispatcherGatewayRetriever = new RpcGatewayRetriever<>(
rpcService,
DispatcherGateway.class,
DispatcherId::fromUuid,
10,
Time.milliseconds(50L));
LeaderGatewayRetriever<ResourceManagerGateway> resourceManagerGatewayRetriever = new RpcGatewayRetriever<>(
rpcService,
ResourceManagerGateway.class,
ResourceManagerId::fromUuid,
10,
Time.milliseconds(50L));
// TODO: Remove once we have ported the MetricFetcher to the RpcEndpoint
final ActorSystem actorSystem = ((AkkaRpcService) rpcService).getActorSystem();
final Time timeout = Time.milliseconds(configuration.getLong(WebOptions.TIMEOUT));
webMonitorEndpoint = createRestEndpoint(
configuration,
dispatcherGatewayRetriever,
resourceManagerGatewayRetriever,
transientBlobCache,
rpcService.getExecutor(),
new AkkaQueryServiceRetriever(actorSystem, timeout),
highAvailabilityServices.getWebMonitorLeaderElectionService());
LOG.debug("Starting Dispatcher REST endpoint.");
webMonitorEndpoint.start();
resourceManager = createResourceManager(
configuration,
ResourceID.generate(),
rpcService,
highAvailabilityServices,
heartbeatServices,
metricRegistry,
this,
clusterInformation,
webMonitorEndpoint.getRestBaseUrl());
jobManagerMetricGroup = MetricUtils.instantiateJobManagerMetricGroup(metricRegistry, rpcService.getAddress());
final HistoryServerArchivist historyServerArchivist = HistoryServerArchivist.createHistoryServerArchivist(configuration, webMonitorEndpoint);
dispatcher = createDispatcher(
configuration,
rpcService,
highAvailabilityServices,
resourceManager.getSelfGateway(ResourceManagerGateway.class),
blobServer,
heartbeatServices,
jobManagerMetricGroup,
metricRegistry.getMetricQueryServicePath(),
archivedExecutionGraphStore,
this,
webMonitorEndpoint.getRestBaseUrl(),
historyServerArchivist);
LOG.debug("Starting ResourceManager.");
resourceManager.start();
resourceManagerRetrievalService.start(resourceManagerGatewayRetriever);
LOG.debug("Starting Dispatcher.");
dispatcher.start();
dispatcherLeaderRetrievalService.start(dispatcherGatewayRetriever);
}
}从上述代码里可以发现，AM里面包含两个重要的全新组件：ResourceManager和Dispatcher
在FLIP6的改进下，Resource这个全新的角色定义如下：
The main tasks of the ResourceManager are
- Acquire new TaskManager (or slots) by starting containers, or allocating them to a job
- Giving failure notifications to JobManagers and TaskManagers
- Caching TaskManagers (containers) to be reused, releasing TaskManagers (containers) that are unused for a certain period.
大体来说就是由ResourceManager负责和YARN集群进行资源申请上的沟通，并给指定JobManager分配特定
aa
在yarn模式下，ResourceManager对应的实现类为YarnResourceManager，在这个类的initialize方法中，我们可以发现它实例化了两个client，resourceManagerClient和nodeManagerClient，这两个客户端分别包含了Yarn框架的AMRMClientAsync和NMClient，分别用来负责和Yarn的ResourceManager和NodeManager通信。
代码语言：javascript复制 @Override
protected void initialize() throws ResourceManagerException {
try {
resourceManagerClient = createAndStartResourceManagerClient(
yarnConfig,
yarnHeartbeatIntervalMillis,
webInterfaceUrl);
} catch (Exception e) {
throw new ResourceManagerException("Could not start resource manager client.", e);
}
nodeManagerClient = createAndStartNodeManagerClient(yarnConfig);
}关于Dispatcher的定义如下，它取代了以前由jobManager负责的提交job给集群的工作，并且预期将来可以由一个dispatcher提交任务给多个集群。
The new design includes the concept of a Dispatcher. The dispatcher accepts job submissions from clients and starts the jobs on their behalf on a cluster manager.
The dispatcher is introduced because:
- Some cluster managers need a central job spawning and monitoring instance
- It subsumes the role of the standalone JobManager, waiting for jobs to be submitted
在本文的条件下，Dispatcher具体的实现类为MiniDispatcher,在dispatcher.start();调用后，整个调用链经过了
代码语言：javascript复制leaderElectionService.start(this)->ZooKeeperLeaderElectionService.start->ZooKeeperLeaderElectionService.isLeader->Dispatcher.grantLeadership->tryAcceptLeadershipAndRunJobs->runJob->createJobManagerRunner调到了DisPatcher的createJobManagerRunner方法。
代码语言：javascript复制 private CompletableFuture<JobManagerRunner> createJobManagerRunner(JobGraph jobGraph) {
final RpcService rpcService = getRpcService();
final CompletableFuture<JobManagerRunner> jobManagerRunnerFuture = CompletableFuture.supplyAsync(
CheckedSupplier.unchecked(() ->
jobManagerRunnerFactory.createJobManagerRunner(
ResourceID.generate(),
jobGraph,
configuration,
rpcService,
highAvailabilityServices,
heartbeatServices,
blobServer,
jobManagerSharedServices,
new DefaultJobManagerJobMetricGroupFactory(jobManagerMetricGroup),
fatalErrorHandler)),
rpcService.getExecutor());
return jobManagerRunnerFuture.thenApply(FunctionUtils.uncheckedFunction(this::startJobManagerRunner));
}上述代码可以分为两个部分，第一部分经过DefaultJobManagerRunnerFactory.createJobManagerRunner->new JobManagerRunner->new JobMaster初始化了JobMaster对象。
第二部分经过
代码语言：javascript复制startJobManagerRunner->JobManagerRunner.start->ZooKeeperLeaderElectionService.start->ZooKeeperLeaderElectionService.isLeader->
JobManagerRunner.grantLeadership->verifyJobSchedulingStatusAndStartJobManager->
jobMaster.start->startJobExecution-> private Acknowledge startJobExecution(JobMasterId newJobMasterId) throws Exception {
validateRunsInMainThread();
checkNotNull(newJobMasterId, "The new JobMasterId must not be null.");
if (Objects.equals(getFencingToken(), newJobMasterId)) {
log.info("Already started the job execution with JobMasterId {}.", newJobMasterId);
return Acknowledge.get();
}
setNewFencingToken(newJobMasterId);
startJobMasterServices();
log.info("Starting execution of job {} ({})", jobGraph.getName(), jobGraph.getJobID());
resetAndScheduleExecutionGraph();
return Acknowledge.get();
}
private void startJobMasterServices() throws Exception {
// start the slot pool make sure the slot pool now accepts messages for this leader
slotPool.start(getFencingToken(), getAddress());
//TODO: Remove once the ZooKeeperLeaderRetrieval returns the stored address upon start
// try to reconnect to previously known leader
reconnectToResourceManager(new FlinkException("Starting JobMaster component."));
// job is ready to go, try to establish connection with resource manager
// - activate leader retrieval for the resource manager
// - on notification of the leader, the connection will be established and
// the slot pool will start requesting slots
resourceManagerLeaderRetriever.start(new ResourceManagerLeaderListener());
} JobMaster首先调用startJobMasterServices进行连接flink resource manager ,启动jobmanager服务并注册等操作。然后通过resetAndScheduleExecutionGraph执行任务资源的初始化申请。resetAndScheduleExecutionGraph方法首先调用createAndRestoreExecutionGraph生成了整个任务的executiongraph，然后通过
代码语言：javascript复制scheduleExecutionGraph->ExecutionGraph.scheduleForExecution->scheduleEager->ExecutionJobVertex.allocateResourcesForAll->Execution.allocateAndAssignSlotForExecution->ProviderAndOwner.allocateSlot->SlotPool.allocateSlot->allocateMultiTaskSlot提出对任务slot资源的申请
代码语言：javascript复制SlotPool.requestSlotFromResourceManager->ResourceManager.requestSlot->SlotManager.registerSlotRequest->internalRequestSlot->
ResourceActionsImpl.allocateResource->YarnResourceManager.startNewWorker->申请启动新的TaskManager
代码语言：javascript复制 @Override
public void startNewWorker(ResourceProfile resourceProfile) {
log.info("startNewWorker");
// Priority for worker containers - priorities are intra-application
//TODO: set priority according to the resource allocated
Priority priority = Priority.newInstance(generatePriority(resourceProfile));
int mem = resourceProfile.getMemoryInMB() < 0 ? defaultTaskManagerMemoryMB : resourceProfile.getMemoryInMB();
int vcore = resourceProfile.getCpuCores() < 1 ? defaultCpus : (int) resourceProfile.getCpuCores();
Resource capability = Resource.newInstance(mem, vcore);
requestYarnContainer(capability, priority);
}
private void requestYarnContainer(Resource resource, Priority priority) {
resourceManagerClient.addContainerRequest(new AMRMClient.ContainerRequest(resource, null, null, priority));
// make sure we transmit the request fast and receive fast news of granted allocations
resourceManagerClient.setHeartbeatInterval(FAST_YARN_HEARTBEAT_INTERVAL_MS);
numPendingContainerRequests ;
log.info("Requesting new TaskExecutor container with resources {}. Number pending requests {}.",
resource,
numPendingContainerRequests);
}上述代码就是flink resourcemanager 通过yarn客户端与yarn通信申请taskmanager部分代码
代码语言：javascript复制 @Override
public void onContainersAllocated(List<Container> containers) {
log.info("onContainersAllocated");
runAsync(() -> {
for (Container container : containers) {
log.info(
"Received new container: {} - Remaining pending container requests: {}",
container.getId(),
numPendingContainerRequests);
if (numPendingContainerRequests > 0) {
numPendingContainerRequests--;
final String containerIdStr = container.getId().toString();
final ResourceID resourceId = new ResourceID(containerIdStr);
workerNodeMap.put(resourceId, new YarnWorkerNode(container));
try {
// Context information used to start a TaskExecutor Java process
ContainerLaunchContext taskExecutorLaunchContext = createTaskExecutorLaunchContext(
container.getResource(),
containerIdStr,
container.getNodeId().getHost());
nodeManagerClient.startContainer(container, taskExecutorLaunchContext);
} catch (Throwable t) {
log.error("Could not start TaskManager in container {}.", container.getId(), t);
// release the failed container
workerNodeMap.remove(resourceId);
resourceManagerClient.releaseAssignedContainer(container.getId());
// and ask for a new one
requestYarnContainer(container.getResource(), container.getPriority());
}
} else {
// return the excessive containers
log.info("Returning excess container {}.", container.getId());
resourceManagerClient.releaseAssignedContainer(container.getId());
}
}
// if we are waiting for no further containers, we can go to the
// regular heartbeat interval
if (numPendingContainerRequests <= 0) {
resourceManagerClient.setHeartbeatInterval(yarnHeartbeatIntervalMillis);
}
});
}am客户端在taskmanager的客户端里会设置启动的主类org.apache.flink.yarn.YarnTaskExecutorRunner
