This is a Windows 10 IoT Core project on the Raspberry Pi 2/3, coded by C#.
GitHub：https://github.com/ZhangGaoxing/windows-iot-demo/tree/master/NRF24L01
Image
Connect
nRF1
- VCC - 3.3V (Best)
- GND - GND
- MOSI - SPI0 MOSI (GPIO 10)
- MISO - SPI0 MISO (GPIO 9)
- SCK - SPI0 SCLK (GPIO 11)
- CSN - SPI0 CS0 (GPIO 8)
- CE - GPIO 23
- IRQ - GPIO 24
- nRF2
- VCC - 3.3V (Best)
- GND - GND
- MOSI - SPI1 MOSI (GPIO 20)
- MISO - SPI1 MISO (GPIO 19)
- SCK - SPI1 SCLK (GPIO 21)
- CSN - SPI1 CS0 (GPIO 16)
- CE - GPIO 5
- IRQ - GPIO 6
What Contains
In NRF24L01.cs file
代码语言：javascript复制/// <summary>
/// Initialize
/// </summary>
public async Task InitializeAsync();
/// <summary>
/// Send
/// </summary>
/// <param name="data">Data</param>
public async void Send(byte[] data);
/// <summary>
/// Receive
/// </summary>
/// <param name="length">Packet Size</param>
/// <returns>Data</returns>
public byte[] Receive(byte length);......
How to Use
- First, you need to create a NRF24L01 object. After that you should call InitializeAsync() to initialize. ```C# // Create and Initialize // CSN Pin, CE Pin, IRQ Pin, SPI Friendly Name, Receive Packet Size NRF24L01 sender = new NRF24L01(0, 23, 24, "SPI0", 12); NRF24L01 receiver = new NRF24L01(0, 5, 6, "SPI1", 12);
await sender.InitializeAsync();
await receiver.InitializeAsync();
* SecondlyC#
sender.Send(Encoding.UTF8.GetBytes("ZhangGaoxing"));
receiver.ReceivedData = Receiver_ReceivedData;
private void Receiver_ReceivedData(object sender, ReceivedDataEventArgs e) { var raw = e.Data.Skip(1).ToArray(); var res = Encoding.UTF8.GetString(raw);
代码语言：javascript复制Debug.Write("Received Raw Data : ");
foreach (var item in raw)
{
Debug.Write($"{item} ");
}
Debug.WriteLine("");
Debug.WriteLine($"Received Data : {res}");}
* If you want to close the sensor, call Dispose().C#
sender.Dispose();
receiver.Dispose();
```
