ELK完整部署教程

前言

ELK: Elasticsearch Logstash Kibana. 实际部署： Elasticsearch Kibana Logstash (各种beats) filebeat

filebeat是将本机例如无法二次开发推送给Logstash的应用中的文件log推送给Logstash/Elasticsearch 以下为本机非容器直接部署步骤。本次教程以Ubuntu 22.04系统为例。

Elasticsearch安装

安装Elasticsearch

可直接参考官方教程安装Elasticsearch :

代码语言：javascript复制

wget wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.12.2-amd64.deb

sudo dpkg -i elasticsearch-8.12.2-amd64.deb

也可以通过安装GPG Key Ring和source list的方式通过apt install来安装:

代码语言：javascript复制

wget -qO - https://artifacts.elastic.co/GPG-KEY-elasticsearch | sudo gpg --dearmor -o /usr/share/keyrings/elasticsearch-keyring.gpg

sudo apt-get install apt-transport-https

echo "deb [signed-by=/usr/share/keyrings/elasticsearch-keyring.gpg] https://artifacts.elastic.co/packages/8.x/apt stable main" | sudo tee /etc/apt/sources.list.d/elastic-8.x.list

sudo apt-get update && sudo apt-get install elasticsearch

安装完成后，查看输出窗口，可以看到动态生成的密码。我一般直接将该输出保存文件方便后续使用

代码语言：javascript复制

--------------------------- Security autoconfiguration information ------------------------------

Authentication and authorization are enabled.
TLS for the transport and HTTP layers is enabled and configured.

The generated password for the elastic built-in superuser is : _XocGB8Pt*gTl 0f FlU

If this node should join an existing cluster, you can reconfigure this with
'/usr/share/elasticsearch/bin/elasticsearch-reconfigure-node --enrollment-token <token-here>'
after creating an enrollment token on your existing cluster.

You can complete the following actions at any time:

Reset the password of the elastic built-in superuser with
'/usr/share/elasticsearch/bin/elasticsearch-reset-password -u elastic'.

Generate an enrollment token for Kibana instances with
 '/usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana'.

Generate an enrollment token for Elasticsearch nodes with
'/usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s node'.

-------------------------------------------------------------------------------------------------
### NOT starting on installation, please execute the following statements to configure elasticsearch service to start automatically using systemd
 sudo systemctl daemon-reload
 sudo systemctl enable elasticsearch.service
### You can start elasticsearch service by executing
 sudo systemctl start elasticsearch.service

默认安装成功后，我们根据输出提示，启用elasticsearch

代码语言：javascript复制

 sudo systemctl daemon-reload
 sudo systemctl enable elasticsearch.service
### You can start elasticsearch service by executing
 sudo systemctl start elasticsearch.service

默认启用SSL,我们可以通过https://192.168.1.20:9200访问。用户名：elastic 密码：输出生成的密码(例如本例中：_XocGB8Pt*gTl 0f FlU)

也可以使用curl来访问测试：不过在此之前，将密码临时保存成变量

代码语言：javascript复制

export ELASTIC_PASSWORD="your_password"

curl --cacert /etc/elasticsearch/certs/http_ca.crt -u elastic:$ELASTIC_PASSWORD https://localhost:9200

注意

默认安装位置为/usr/share/elasticsearch, 其他的同理。以下命令可以生成kibana专属注册码，会使得kibana添加elasticsearch信息。如果之后安装好kibana没有注册，kibana也会弹窗让你输入。

代码语言：javascript复制

/usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana

安装Kibana

同样可以使用apt install安装或者deb/rpm安装 Kibana官方安装方法

Digital Ocean ELK Stack安装教程

Kibana配置

配置位于/etc/kibana/kibana.yml

代码语言：javascript复制

# 只需要修改server.host即可。
# =================== System: Kibana Server ===================
# Kibana is served by a back end server. This setting specifies the port to use.
#server.port: 5601

# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
server.host: "192.168.1.20"
#===================

如果你使用阿里云，有EIP和VPC内网IP,请直接输入VPC的内网IP即可，不需要输入公网IP

这个时候应该可以通过非本机来登录Kibana Digital Ocean教程提到安装Nginx并配置成反向代理。（他配置是反向代理到80端口）新版本本身不需要额外反向代理。除非你想端口换成80。而且也不需要额外配置网页用户验证用户名密码。

Kibana SSL

代码语言：javascript复制

# 生成PEM格式的SSL证书
/usr/share/elasticsearch/bin/elasticsearch-certutil ca --pem

# 默认保存在/usr/share/elasticsearch/elastic-stack-ca.zip
# 解压
unzip /usr/share/elasticsearch/elastic-stack-ca.zip

# 路径：/usr/share/elasticsearch/ca
mkdir /etc/kibana/certs
mv /usr/share/elasticsearch/ca/* /etc/kibana/certs
rm -rf /usr/share/elasticsearch/ca/

配置kibana.yml

代码语言：javascript复制

# =================== System: Kibana Server (Optional) ===================
# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
# These settings enable SSL for outgoing requests from the Kibana server to the browser.
server.ssl.enabled: true
server.ssl.certificate: /etc/kibana/certs/ca.crt
server.ssl.key: /etc/kibana/certs/ca.key

重启Kibana，即可使用HTTPS连接Kibana。

Kibana Enrollment

安装完成后在systemctl status kibana中可以看出

代码语言：javascript复制

http://192.168.1.20:5601/?code=123456

通过以上链接进入Kibana面板进入配置。

代码语言：javascript复制

/usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana

如果没有使用以上链接，在输入完enrollment注册码后，会让你输入验证码，通过运行/usr/share/kibana/kibana-verification-code即可。

logstash安装

logstash安装同样通过官网查看教程即可 logstash官方安装方法

logstash配置一

将配置从/etc/logstash/logstash-sample.conf复制并修改到/etc/logstash/conf.d/目录下，例如命名为10-input.conf 配置可以将input,output分开，这里为了方便，我们不分开成两个文件。

代码语言：javascript复制

# 以logstash用户名义运行, 并且配置项路径为/etc/logstash
sudo -u logstash /usr/share/logstash/bin/logstash --path.settings /etc/logstash -t

# 测试限定的配置文件
bin/logstash -f first-pipeline.conf --config.test_and_exit

# 将以上命令合并
# == 由于默认是安装在/usr/share/logstash下，该命令执行前已经cd到usr/share/logstash。所以需要增加path.settings设置配置读取路径。
sudo -u logstash bin/logstash -f /etc/logstash/conf.d/10-input-and-output.conf --path.settings /etc/logstash --config.test_and_exit

# 如果使用filebeat   logstash做测试，例如将logstash output改为单独stdout(控制台输出)，不需要添加--config.test_and_exit

使用用户名logstash运行时，由于文件夹/usr/share/logstash归属权为root，会报错Your settings are invalid. Reason: Path “/usr/share/logstash/data” must be a writable directory. It is not writable. 需要将文件夹及其子文件夹都修改用户归属权为logstash

代码语言：javascript复制

chown logstash /usr/share/logstash/data -R

同理，权限导致的错误 File does not exist or cannot be opened /etc/elasticsearch/certs/http_ca.crt

代码语言：javascript复制

# 单独授权certs/http_ca.crt, certs文件夹都会报错。
chmod 777 -R /etc/elasticsearch/

示例配置，输出到elasticsearch和stdout

代码语言：javascript复制

input {
  beats {
    port => 5044
  }
}

output {
   elasticsearch {
     hosts => ["https://192.168.1.20:9200"]
     index => "%{[@metadata][beat]}-%{[@metadata][version]}-%{ YYYY.MM.dd}"
     ssl => true
     ################
     #ssl_certificate_verification => false
     #cacert => "/etc/elasticsearch/certs/http_ca.crt"
     # 以上的方式都即将弃用，已更换到如下两行
     ssl_verification_mode => none
     ssl_certificate_authorities => "/etc/elasticsearch/certs/http_ca.crt"
     ################
     user => "elastic"
     password => "_XocGB8Pt*gTl 0f FlU"
   }
   stdout { codec => rubydebug }
}

这里的index非常关键，这将会是使用Kibana搜索的数据库名字来源。为了方便测试logstash与elasticsearch连接测试，以及Kibana数据搜索测试。如果有报错提示，例如

[WARN ][logstash.outputs.elasticsearch][main][819e4368074e36871183245e19ecc296ba42dc18adefe03abf70bb82708ff262] Badly formatted index, after interpolation still contains placeholder: [logs-%{[@metadata][file]}-%{[@metadata][version]}-2013.12.11] 则代表没有上传成功。

本文配置简化为

代码语言：javascript复制

index => "logs-%{ YYYY.MM.dd}"

这时候，通过Analytics的Discover, Data views选择logs-*即可看到日志。

filebeat安装

安装filebeat

默认安装好之后，不需要到/usr/share/filebeat执行，直接输入filebeat执行即可。

代码语言：javascript复制

# 查看模块以及激活模块
filebeat modules list
filebeat modules enable nginx

默认情况下，已激活的模块内的配置文件其实还是enabled: false，需要手动进去修改成enable。不然你会在systemctl status filebeat看到报错。运行失败。 creating module reloader failed: could not create module registry for filesets: module nginx is configured but has no enabled filesets

路径示例：/etc/filebeat/module.d/system.yaml

示例nginx.yaml:

代码语言：javascript复制

- module: nginx
  access:
    enabled: true
    var.paths: ["/var/log/nginx/access.log*"] 
```    

### 配置filebeat
配置路径在/etc/filebeat/filebeat.yaml内。如果执行方式不直接使用filebeat,而是使用/usr/share/filebeat/bin/filebeat的话，他不会读取/etc/下的配置。不建议使用。

以下是配置文件
```yaml
# /etc/filebeat/filebeat.yaml
# 这里只保留修改过的内容
setup.kibana:
  host: "192.168.1.20:5601"

output.elasticsearch:

  hosts: ["https://192.168.1.20:9200"]
  username: "elastic"
  password: "_XocGB8Pt*gTl 0f FlU"
  ssl:
    enabled: true
    ca_trusted_fingerprint: "2F565528013197EFCAA18776A98B547B0DD9DDE3030DD90E67D7493E15A8"
    verification_mode: none

以上的配置文件需要注意的是，官网没有告诉你默认由于elasticsearch以及有自签名的TLS了，除了加ca_trusted_fingerprint外，还需要加verification_mode: none。或者写成ssl.verification_mode: none

获取ca_trusted_fingerprint：

代码语言：javascript复制

openssl x509 -fingerprint -sha256 -in config/certs/http_ca.crt

在输出的第一行就是fingerprint,但是由于多了冒号(:)，你还需要将冒号删除或者替换。还有更方便的方法就是查看kibana的配置。在最后一行，如果已经enroll的话，会添加了自动注册后的信息。而这个信息，在最后有ca_trusted_fingerprint，复制粘贴即可。

代码语言：javascript复制

# /etc/kibana/kibana.yaml
# This section was automatically generated during setup.
elasticsearch.hosts: ['https://192.168.1.20:9200']
elasticsearch.serviceAccountToken: AAEAAWVsYXN0aWMva2liYW5hL2Vucm9sbC1wcm9jZXNzLXRva2VuLTE3MDk5MDU4MTczOTc6RC1IUTM0UldTQVM2ZmcyZDlhaFVkZw
elasticsearch.ssl.certificateAuthorities: [/var/lib/kibana/ca_1709905817848.crt]
xpack.fleet.outputs: [{id: fleet-default-output, name: default, is_default: true, is_default_monitoring: true, type: elasticsearch, hosts: ['https://192.168.1.20:9200'], ca_trusted_fingerprint: 2f565528013197efcaa18776a98b547b0dd9dde3030dd90e67d7493e15a8961d}]

测试filebeat连接Logstash

代码语言：javascript复制

filebeat test config
filebeat test output
filebeat setup
filebeat setup -e

测试前，请先运行Logstash。为了简单，我们的logstash.yml只有input和output。

代码语言：javascript复制

# Sample Logstash configuration for creating a simple
# Beats -> Logstash -> Elasticsearch pipeline.

input {
  beats {
    port => 5044
  }

}

output {
  elasticsearch {
    hosts => ["https://localhost:9200"]
    index => "logs-%{ YYYY.MM.dd}"
    ssl_enabled => true
    ssl_certificate_verification => false
    cacert => "/etc/elasticsearch/certs/http_ca.crt"
    user => "elastic"
    password => "_XocGB8Pt*gTl 0f FlU"
  }
  stdout { codec => rubydebug }
}

如果你想要output是logstash的话，请不要与output.elasticsearch一起启用。请单独启用一个。如果遇到错误Exiting: /var/lib/filebeat/filebeat.lock: data path already locked by another beat. Please make sure that multiple beats are not sharing the same data path (path.data)，请停止filebeat (systemctl stop filebeat) 以官方教程中为例：设置filebeat.inputs为教程下载的log文件。并把输出设置为output.logstash Parsing Logs with Logstash

代码语言：javascript复制

filebeat -e -c filebeat.yml -d "publish"

这个时候，回到Kibana, 就可以看到一堆log了。

elk 部署测试教程配置

0 人点赞