HP服务器官方管理工具hpacucli，通过该工具可以查看HP服务器的Raid状态是否正常（如果Raid卡出问题，会影响数据的读写速度），服务器硬盘是否正常（如果硬盘坏掉，严重的情况会丢失数据），服务器电源是否有故障等信息。
HP服务器官方管理工具hpasmcli，通过该工具可以很详细查看服务器CPU，内存，处理器，电源等的温度信息。
软件随时会更新，这个我就不直接在这儿分享，我一般都是和惠普的技术直接沟通获取最新版地址！
[[email protected] ~]# rpm -ivh hpacucli-9.40-12.0.x86_64.rpm
2）查看服务器RAID、硬盘是否正常。 [[email protected] ~]# hpacucli ctrl all show config [[email protected] ~]# hpacucli ctrl all show config detail 可以详细地查看RAID和硬盘的信息
[[email protected] ~]# hpacucli ctrl all show config
Smart Array E200i in Slot 0 (Embedded) (sn: PR97MP2834 )
array A (SAS, Unused Space: 0 MB)
logicaldrive 1 (558.7 GB, RAID 5, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK)
[[email protected] ~]# hpacucli ctrl all show config detail
Smart Array E200i in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: PR97MP2834 Cache Serial Number: P75B20C9SRO5BQ RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: A Firmware Version: 1.82 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: Temporarily Disabled Cache Status Details: Cache disabled; low batteries. Cache Ratio: 50% Read / 50% Write Drive Write Cache: Disabled Total Cache Size: 128 MB Total Cache Memory Available: 96 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: Failed (Replace Batteries) SATA NCQ Supported: False
Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data
Logical Drive: 1 Size: 558.7 GB Fault Tolerance: 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B1001038333420202020200004 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 200 MB, / 542.5 GB OS Status: LOCKED Logical Drive Label: A0100C5FPR97MP2834 2E7A Drive Type: Data
physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 6SE24FXD0000B124L36W Model: HP EG0300FAWHV PHY Count: 2 PHY Transfer Rate: 3.0Gbps, Unknown
physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 6SE27HWB0000B124KXPQ Model: HP EG0300FAWHV PHY Count: 2 PHY Transfer Rate: 3.0Gbps, Unknown
physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPDD Serial Number: 6SE0KNEM0000B1012K5S Model: HP EG0300FAWHV PHY Count: 2 PHY Transfer Rate: 3.0Gbps, Unknown
硬件温度信息获取：
1)安装hpasmcli [[email protected] ~]# rpm -ivh hp-health-9.40-1602.44.rhel6.x86_64.rpm
2)查看服务器CPU，内存，处理器，电源等的温度信息 [[email protected] ~]# hpasmcli -s ‘show’ 查看类似于help的帮助信息，监控的时候要重点关注 DIMM(内存)、FANS(风扇)、POWERSUPPLY(电源模块)、SERVER(系统)、CPU、TEMP(温度)等信息。 [[email protected] ~]# hpasmcli -s ‘show’
Invalid Arguments SHOW ASR SHOW BOOT SHOW DIMM [ SPD ] SHOW F1 SHOW FANS SHOW HT SHOW IML SHOW IPL SHOW NAME SHOW PORTMAP SHOW POWERMETER SHOW POWERSUPPLY SHOW PXE SHOW SERIAL [ BIOS | EMBEDDED | VIRTUAL ] SHOW SERVER SHOW TEMP SHOW TPM SHOW UID SHOW WOL
[[email protected] ~]# hpasmcli -s ‘show TEMP’ 查看服务器各部件的温度信息，其中Temp表示各部件当前的温度，Threshold表示临界温度，当当前温度超过临界温度的时候就要注意啦。 [[email protected] ~]# hpasmcli -s ‘show TEMP’
Sensor Location Temp Threshold —— ——– —- ——— #1 I/O_ZONE 46C/114F 65C/149F #2 AMBIENT 21C/69F 40C/104F #3 CPU#1 30C/86F 95C/203F #4 CPU#1 30C/86F 95C/203F #5 POWER_SUPPLY_BAY 30C/86F 60C/140F #6 CPU#2 30C/86F 95C/203F #7 CPU#2 30C/86F 95C/203F
[[email protected] ~]# hpasmcli -s ‘show dimm’ 查看内存信息 [[email protected] ~]# hpasmcli -s ‘show TEMP’ 查看硬件温度 [[email protected] ~]# hpasmcli -s ‘show fans’ 查看风扇信息 [[email protected] ~]# hpasmcli -s ‘show powersupply’ 查看电源模块 [[email protected] ~]# hpasmcli -s ‘show server’ 查看机器型号,序列号,CPU,内存大小
